We demonstrate ultra-air- and photostable CsPbBr₃ quantum dots (QDs) by using an inorganic–organic hybrid ion pair as the capping ligand. This passivation approach to perovskite QDs yields high photoluminescence quantum yield with unprecedented operational stability in ambient conditions (60 ± 5% lab humidity) and high pump fluences, thus overcoming one of the greatest challenges impeding the development of perovskite-based applications. Due to the robustness of passivated perovskite QDs, we were able to induce ultrastable amplified spontaneous emission (ASE) in solution processed QD films not only through one photon but also through two-photon absorption processes. The latter has not been observed before in the family of perovskite materials. More importantly, passivated perovskite QD films showed remarkable photostability under continuous pulsed laser excitation in ambient conditions for at least 34 h (corresponds to 1.2 × 10⁸ laser shots), substantially exceeding the stability of other colloidal QD systems in which ASE has been observed.

Fiber–optic sensors have been widely deployed in various applications, and their use has gradually increased since the 1980 s. Distributed fiber–optic sensors, which enable continuous and real–time measurements along the entire length of an optical fiber cable, have undergone significant improvements in underlying industries. In the oil and gas industry, distributed fiber–optic sensors can provide significantly valuable information throughout the life cycle of a well and can monitor pipelines transporting hydrocarbons over great distances. Here, we review the deployment of fiber–optic Rayleigh–based distributed acoustic sensing (DAS), Raman–based distributed temperature sensing (DTS), and Brillouin–based distributed temperature and strain sensing (DTSS) in the oil and gas industry. In particular, we describe the operation principle and basic experimental setups of the DAS, DTS, and DTSS, highlighting their applications in the upstream, midstream, and downstream sectors of the oil and gas industry. We further developed a prototype of a fiber–optic hybrid DAS–DTS system that simultaneously measures vibration and temperature along a multimode fiber (MMF). The reported hybrid sensing system was tested in an operational oil well. This work also discusses the challenges that might hinder the growth of the distributed fiber–optic sensing market in the petroleum industry, and we further point out the future directions of related research.

We experimentally demonstrate an underwater wireless optical communications (UWOC) employing 450-nm TO-9 packaged and fiber-pigtailed laser diode (LD) directly encoded with an orthogonal frequency division multiplexed quadrature amplitude modulation (QAM-OFDM) data. A record data rate of up to 4.8 Gbit/s over 5.4-m transmission distance is achieved. By encoding the full 1.2-GHz bandwidth of the 450-nm LD with a 16-QAM-OFDM data, an error vector magnitude (EVM) of 16.5%, a signal-to-noise ratio (SNR) of 15.63 dB and a bit error rate (BER) of 2.6 × 10⁻³, well pass the forward error correction (FEC) criterion, were obtained.

Optical wireless communication (OWC) using the ultra-broad spectrum of the visible-to-ultraviolet (UV) wavelength region remains a vital field of research for mitigating the saturated bandwidth of radio-frequency (RF) communication. However, the lack of an efficient UV photodetection methodology hinders the development of UV-based communication. The key technological impediment is related to the low UV-photon absorption in existing silicon photodetectors, which offer low-cost and mature platforms. To address this technology gap, we report a hybrid Si-based photodetection scheme by incorporating CsPbBr₃ perovskite nanocrystals (NCs) with a high photoluminescence quantum yield (PLQY) and a fast photoluminescence (PL) decay time as a UV-to-visible colour-converting layer for high-speed solar-blind UV communication. The facile formation of drop-cast CsPbBr₃ perovskite NCs leads to a high PLQY of up to ~73% and strong absorption in the UV region. With the addition of the NC layer, a nearly threefold improvement in the responsivity and an increase of ~25% in the external quantum efficiency (EQE) of the solar-blind region compared to a commercial silicon-based photodetector were observed. Moreover, time-resolved photoluminescence measurements demonstrated a decay time of 4.5 ns under a 372-nm UV excitation source, thus elucidating the potential of this layer as a fast colour-converting layer. A high data rate of up to 34 Mbps in solar-blind communication was achieved using the hybrid CsPbBr₃–silicon photodetection scheme in conjunction with a 278-nm UVC light-emitting diode (LED). These findings demonstrate the feasibility of an integrated high-speed photoreceiver design of a composition-tuneable perovskite-based phosphor and a low-cost silicon-based photodetector for UV communication.

The video streaming, data transmission, and remote control in underwater call for high speed (Gbps) communication link with a long channel length (~10 meters). We present a compact and low power consumption underwater wireless optical communication (UWOC) system utilizing a 450-nm laser diode (LD) and a Si avalanche photodetector. With the LD operating at a driving current of 80 mA with an optical power of 51.3 mW, we demonstrated a high-speed UWOC link offering a data rate up to 2 Gbps over a 12-meter-long, and 1.5 Gbps over a record 20-meter-long underwater channel. The measured bit-error rate (BER) are 2.8 × 10⁻⁵, and 3.0 × 10⁻³, respectively, which pass well the forward error correction (FEC) criterion.