An effective Hamiltonian finite element method is presented in this paper to investigate the three-dimensional dynamic responses of a towed cable-payload system with large deformation. The dynamics of a flexible towed system moving in a medium is a classical and complex rigid-flexible-liquid coupling problem. The dynamic governing equation is derived from the Hamiltonian system and built-in canonical form. A Symplectic algorithm is built to analyze the canonical equations numerically. Logarithmic strain is applied to estimate the large deformation effect and the system stiffness matrix will be updated for each calculation time step. A direct integral solution of the medium drag effect is derived in which the traditional coordinate transformation is avoided. A conical pendulum system and a 180° U-turn towed cable system are conducted and the results are compared with those retraced from the existing Hamiltonian method based on small deformation theory and the dynamic software of Livermore software technology corp. (LS-DYNA). Furthermore, a circularly towed system is analyzed and compared with experimental data. The comparisons show that the presented method is more accurate than the existing Hamiltonian method when large deformation occurred in the towed cable due to the application of logarithmic strain. Furthermore, it is more effective than LS-DYNA to treat the rigid-flexible-liquid coupling problems in the costs of CPU time.
Both strain hardening and indenter elastic deformation are unavoidable in most engineering contacts. By the finite element (FE) method, this paper investigates the unloading behavior of elastic-power-law strain hardening half-space frictionlessly indented by elastic sphere for systematic materials. The effects of indenter elasticity on the unloading curve, cavity profile during unloading, and residual indentation of strain hardening contact are analyzed. The unloading curve is observed to follow a power-law relationship, whose exponent is sensitive to strain hardening but independent upon indenter elastic deformation. The indenter elasticity hugely affects the residual indentation of strain hardening materials. Based on the power-law relationship of the unloading curve and the expression of the residual indentation fitted from the FE data, an innovative contact unloading law of strain hardening materials considering the indenter elasticity effect is developed. Its suitability is validated both numerically and experimentally by strain hardening materials contacted by elastic indenter or rigid flat.
1 October 2019 in Journal of Physics: Conference Series
This paper transforms the discrete Langrangian formulation of spatial flexible tether systems to Hamiltonian formulism. The resulting Hamiltonian canonical equations are solved by Symplectic difference scheme. The application of Symplectic difference method for solution of nonlinear tether dynamic problems ensures conservation of system energy, momentum and volume. Two numerical examples are conducted to validate the proposed method, one is the free swing pendulum system and the other one is the three-dimensional circular towed system. The simulation results are compared with theoretical and the existing numerical results. The comparisons demonstrate the proposed Symplectic difference integrator for the Hamiltonian nodal position finite element method is numerically accurate and efficient to predict the dynamic response of spatial flexible tether systems.
A new unloading contact model of an elastic–perfectly plastic half-space indented by an elastic spherical indenter is presented analytically. The recovered deformation of the elastic indenter and the indented half-space has been found to be dependent on the elastic modulus ratio after fully unloading. The recovered deformation of the indented half-space can be calculated based on the deformation of the purely elastic indenter. The unloading process is assumed to be entirely elastic, and then the relationship of contact force and indentation can be determined based on the solved recovered deformation and conforms to Hertzian-type. The model can accurately predict the residual indentation and residual curvature radius after fully unloading. Numerical simulations are performed to demonstrate the assumptions and the unloading model. The proposed unloading model can cover a wide range of indentations and material properties and is compared with existing unloading models. The cyclic behavior including loading and unloading can be predicted by combining the proposed unloading law with the existing contact loading model. The combined model can be employed for low-velocity impact and nanoindentation tests and the comparison results are in good agreement.
The prediction of the low-velocity collision response of a plate has substantial engineering significance. This paper presents a study to predict the low-velocity collision response characterization of a plate considering the strain hardening effect struck by a rigid sphere. To investigate the efficiency of the collision characterization diagram (CCD) based on the theoretical contact stiffness in characterizing the collision response case and calculating the maximum collision force, the intensive collision cases considering the strain hardening effect are implemented by the finite element (FE) method. It shows that CCD is inaccurate for the collision cases, considering the strain hardening effect. To modify CCD, a new contact stiffness is proposed to replace the theoretical contact stiffness. A universal analytical expression of the new contact stiffness is presented according to the intensive FE simulations for a wide range of materials of a plate, considering the strain hardening effect. A modified collision characterization diagram (MCCD) is then proposed by using the new contact stiffness, which makes up for the deficiencies of CCD. MCCD is validated by the FE simulations with different collision energies, plate materials, and structural constraints. The results show that MCCD can accurately and quickly predict the response case and the maximum collision force.