xinZhuoyue Hu

Dr. xinZhuoyue Hu

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 September 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
XHxinZhuoyue Hu
xinZhuoyue Hu
MZMin Zhu
Min Zhu
QWQiyao Wang
Qiyao Wang
XSXiaofeng Su
Xiaofeng Su
Fansheng ChenFansheng Chen
Fansheng Chen
SDGSAT-1 was launched in November 2021, and TIS (Thermal infrared sensor) is a major instrument onboard this satellite. An analysis of the radiometric calibration and noise performance of the TIS has been carried out in the thermal vacuum chamber before launch in order to ensure that it meets the requirements. The prelaunch test results show NEdT (noise equivalent temperature difference) is 0.034 K, 0.047 K and 0.076 K@300 K for the three bands, respectively. The maximum fitting residuals are less than 0.5 K at measured blackbody temperatures. In addition, this paper also discusses the dependence between TIS performance and instrument temperature and focal plane array (FPA) temperature. The good radiometric and noise performance of TIS demonstrates it has potential to provide high resolution thermal remote sensing data in urban heat island, and other environmental issues research.

27 April 2023 in Remote Sensing
Verified
Journal Article
Open access
PDF file
HWHuang wen wenwen
Huang wen wenwen
JJJingjie Jiao
Jingjie Jiao
LZLixing Zhao
Lixing Zhao
XHxinZhuoyue Hu
xinZhuoyue Hu
XPXiaohong Peng
Xiaohong Peng
Fansheng ChenFansheng Chen
Fansheng Chen
High-accuracy sea surface temperature (SST) retrieval near nuclear power plants (NPPs) is one of the most significant indicators for evaluating marine ecological environment quality, monitoring the real-time situation of thermal discharge, and supporting planning decisions. However, complex computations, the inaccessible real-time vertical profile of the atmosphere, and the uncertainty of atmospheric profile data increase the error of SST retrieval. Additionally, influenced by their low spatial resolution, the widely used AVHRR/MODIS remote sensing images (RSIs) are unable to retrieve the detailed distribution of SST in small scale regions such as coastal NPPs. In this paper, we propose a simplified split-window-based temperature retrieval method (the SW method) suitable for SDGSAT-1 30 m thermal infrared spectrometer (TIS) RSIs. Specially, this method only needs atmospheric transmittance and surface emissivity by counteracting the average atmospheric temperature to monitor the thermal discharge of offshore NPPs. First, the geometric and radiometric calibrated thermal infrared and multi-spectral cloudless data of the target regions are selected to obtain the corresponding apparent radiance of the RSIs. Second, in accordance with the red and near-infrared (NIR) bands of multi-spectral RSIs, the surface emissivity is calculated to distinguish water from land. Next, we determine the atmospheric profile parameters from the weather conditions of the target region at the imaging time. Finally, according to the theory of surface-atmosphere radiative transfer, the SST of target regions is retrieved with the proposed SW method, and the results are compared with those of the conventional radiative transfer equation (RTE), mono-window (MW), and the nonlinear sea surface temperature (NLSST) algorithms. The experimental results indicate that the SST retrieved from the split-window algorithms (i.e., SW and NLSST) are generally higher than those of the single-channel algorithms (i.e., RTE and MW). The SST difference between the SW algorithm and the NLSST algorithm is within 0.5 °C. In addition, SDGSAT-1 can monitor the seasonal detailed variation of the thermal discharge near coastal NPPs. This article is the first to attempt to quantitative small-scale SST retrieval based on thermal infrared and multi-spectral images obtained from the SDGSAT-1 TIS and a multispectral imager (MII), and therefore, provide an effective reference for marine environment monitoring.

7 October 2021 in Sensors
Verified
Journal Article
Open access
PDF file
Linyi JiangLinyi Jiang
Linyi Jiang
LXLi Xiaoyan
Li Xiaoyan
LLLiyuan Li
Liyuan Li
LYLin Yang
Lin Yang
LYLan Yang
Lan Yang
Fansheng ChenFansheng Chen
Fansheng Chen
Affected by the vibrations and thermal shocks during launch and the orbit penetration process, the geometric positioning model of the remote sensing cameras measured on the ground will generate a displacement, affecting the geometric accuracy of imagery and requiring recalibration. Conventional methods adopt the ground control points (GCPs) or stars as references for on-orbit geometric calibration. However, inescapable cloud coverage and discontented extraction algorithms make it extremely difficult to collect sufficient high-precision GCPs for modifying the misalignment of the camera, especially for geostationary satellites. Additionally, the number of the observed stars is very likely to be inadequate for calibrating the relative installations of the camera. In terms of the problems above, we propose a novel on-orbit geometric calibration method using the relative motion of stars for geostationary cameras. First, a geometric calibration model is constructed based on the optical system structure. Then, we analyze the relative motion transformation of the observed stars. The stellar trajectory and the auxiliary ephemeris are used to obtain the corresponding object vector for correcting the associated calibration parameters iteratively. Experimental results evaluated on the data of a geostationary experiment satellite demonstrate that the positioning errors corrected by this proposed method can be within ±2.35 pixels. This approach is able to effectively calibrate the camera and improve the positioning accuracy, which avoids the influence of cloud cover and overcomes the great dependence on the number of the observed stars.

22 October 2021 in IEEE Access
Verified
Journal Article
Open access
LLLiyuan Li
Liyuan Li
LXLi Xiaoyan
Li Xiaoyan
XLXin Liu
Xin Liu
WHWenwen Huang
Wenwen Huang
XHxinZhuoyue Hu
xinZhuoyue Hu
Fansheng ChenFansheng Chen
Fansheng Chen
Semantic segmentation (SS) has been widely applied for cloud detection (CD) in remote sensing images (RSIs) with high spatial and spectral resolution because of its effective pixel-level feature extraction structure. However, the typical model of lightweight SS, namely the fully convolutional network (FCN) with only seven layers, has difficulty in extracting high-level features, and the heavy pyramid scene parsing network (PSPNet) with complicated calculations is not practical in real-time CD, let alone on-orbit CD. So, in view of the problems above, we propose a compact attention mechanism cloud detection network (AM-CDN) based on the modified FCN to refine and fuse the multi-scale features for on-orbit CD. Specifically, taking the FCN as the baseline, our model increases the numbers of hidden layers and adds the residual connections between the input and output to eliminate the network degradation and extract the advanced context feature maps effectively. To expand the receptive field without losing the spatial information, the ordinary convolutions in FCN are replaced by the dilated convolution in AM-CDN. And inspired by the selective kernels of human vision, we introduce the convolutional attention mechanism (AM) into the encoder to adaptively adjust the receptive field to highlight the key texture features. According to experimental results using Landsat-8 infrared RSIs, the accuracy of the proposed CD method is 95.31%, which is 10.17% higher than that of FCN. And the calculation complexity of AM-CDN is only 7.63% of that of PSPNet.

5 December 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
LQLintong Qi
Lintong Qi
XHxinZhuoyue Hu
xinZhuoyue Hu
XZXiaoxuan Zhou
Xiaoxuan Zhou
XNXinyue Ni
Xinyue Ni
Fansheng ChenFansheng Chen
Fansheng Chen
Thermal infrared imagery plays an important role in a variety of fields, such as surface temperature inversion and urban heat island effect analysis, but the spatial resolution has severely restricted the potential for further applications. Data fusion is defined as data combination using multiple sensors, and fused information often has better results than when the sensors are used alone. Since multi-resolution analysis is considered an effective method of image fusion, we propose an MTF-GLP-TAM model to combine thermal infrared (30 m) and multispectral (10 m) information of SDGSAT-1. Firstly, the most relevant multispectral bands to the thermal infrared bands are found. Secondly, to obtain better performance, the high-resolution multispectral bands are histogram-matched with each thermal infrared band. Finally, the spatial details of the multispectral bands are injected into the thermal infrared bands with an MTF Gaussian filter and an additive injection model. Despite the lack of spectral overlap between thermal infrared and multispectral bands, the fused image improves the spatial resolution while maintaining the thermal infrared spectral properties as shown by subjective and objective experimental analyses.

8 December 2021 in Sensors
Verified
Journal Article
Open access
PDF file
LZLi Zhong
Li Zhong
LXLi Xiaoyan
Li Xiaoyan
MZMin Zhu
Min Zhu
XHxinZhuoyue Hu
xinZhuoyue Hu
Fansheng ChenFansheng Chen
Fansheng Chen
The high-precision characterization of the intra-pixel sensitivity (IPS) for infrared focal plane array (FPA) photodetector is of great significance to high-precision photometry and astrometry in astronomy, as well as target tracking in under-sampled remote sensing images. The discrete sub-pixel response (DSPR) model and fill factor model have been used for IPS characterization in some studies. However, these models are incomplete and lack the description of physical process of charge diffusion and capacitance coupling, leading to the inaccuracy of IPS characterization. In this paper, we propose an improved IPS characterization method based on the diffusion and coupling physical (DCP) model for infrared FPA photodetector, which considering the processes of generation and collection of the charge, can improve the accuracy of IPS characterization. The IPS model can be obtained by convolving the ideal rectangular response function with the charge diffusion function and the capacitive coupling function. Then, the IPS model is convolved with the beam spot profile to obtain the beam spot scanning response model. Finally, we calculate the parameters of IPS by fitting the beam spot scanning response map with the proposed DCP model based on the Trust-Region-Reflective algorithm. Simulated results show that when using a 3 μm beam spot to scan, the error of IPS characterization based on DCP model is 0.63%, which is better than that of DSPR model’s 3.70%. Experimental results show that the fitting error of the beam spot scan response model based on DCP model is 4.29%, which is better than that of DSPR model’s 8.31%.