Nonlinear radars can be utilized to detect electronic devices, which are difficult to detect with conventional radars due to their small radar cross sections (RCS). Since the receiver in a nonlinear radar is designed to only receive harmonic or intermodulated echoes from electronic devices, it is able to separate electronic devices from non-electronic scatters (clutter) by rejecting their echoes at fundamental frequencies. This paper presents a harmonic-based nonlinear radar scheme utilizing frequency-modulated continuous-wave (FMCW) signals for the detection of various electronic devices at short range. Using a laboratory experiment setup for FMCW radar at S-band for Tx (C-band for Rx), measurements are carried out to detect electronic devices of various sizes. The results show that the detection of small electronic devices is possible with nonlinear FMCW radar when appropriate system parameters are selected. Furthermore, we also discuss the maximum detectable range estimation for electronic targets using the radar range equation for FMCW nonlinear radar.

The detection of visually obstructed small nonlinear targets in a through-the-wall (TTW) environment is difficult because of linear scatterers and strong wall reflections. In this letter, harmonic-based nonlinear TTW detection is introduced as a method to effectively detect small nonlinear targets behind the wall. Nonlinear TTW detection allows for the suppression of linear scatterer responses and wall reflections by detecting only the harmonics generated from nonlinear targets. Here we apply the decomposition of the time-reversal operator (DORT) for the detection and separation of multiple nonlinear targets behind the wall. DORT extracts the eigenvalues and eigenvectors of nonlinear targets and allows for selective focusing (imaging) of each detected target. In addition, we utilize linear frequency modulated (LFM) pulses, which allow for the compression gain in the detection processing. To validate the proposed concept, we conducted simulation and measurements of various configurations of nonlinear TTW detection. The results demonstrate that nonlinear targets behind the wall can be effectively detected and located.

Forover-the-air (OTA) testing of base station (BS) antenna systems, a plane wave generator (PWG) offers the advantages of a low-cost and compact setup. To suppress radiation energy outside the quiet zone (QZ), PWG designs adopting optimization with specific conditions have recently been proposed. In this letter, we present a PWG approach that provides effective plane wave synthesis based on reference field shaping without imposing any conditions, which can reduce computational complexity. Here, we use a super-Gaussian distribution as the reference field to calculate the optimal excitation coefficients, and the effectiveness of the proposed approach is verified via simulation and measurement. The overall results demonstrate that by inherently taking advantage of super-Gaussian distribution, stable QZ performance can be achieved while simply avoiding unwanted field intensity outside the QZ.