Currently, seaports are actively searching for methods and ways to improve their operational efficiency. Digitalization is considered as one of the main directions of current ports’ development. Ports’ digitalization levels are varied and may depend on different factors, including port size, traditions, turnover and handled cargo type, etc. Ports often face decision-making challenges related to assessment of their digitization level and choice of development directions. The article aims to develop a methodology to evaluate ports’ digitalization level. A marketing research tool was used to collect the data needed for the analysis. A mathematical model allowing simulations is proposed and a case study of 30 ports located in the Baltic, North and Mediterranean Seas regions is explored. Based on conducted calculations, a ranking of analysed ports considering their digitalization level was created. The ports were compared within groups of small, medium-sized and large ports. It was estimated that the digitalization level in small and medium-sized ports is about 30% lower than the level of large seaports. The research results may be of interest to seaports striving to assess their level of digitalization and choose the best digital improvement solutions.

Nowadays great attention is being paid to the ecological aspects of maritime transport functioning, including the problem of pollution and emission of poisonous substances from ships. Such emissions have a significant impact on the environment and sustainable operation of ports, especially those located close to intensive waterways. A decrease in emissions from ships may be achieved by implementing different methods, among others, through the use of environmentally friendly fuels, electrical and hybrid vehicles, as well as through the improvement of port approach and inside navigational channels, optimization of the transport processes organization, etc. However, the size of the influence of ships’ crew and ports pilots’ qualification on the possibility to decrease the emissions from ships during maneuvering in port areas remains a question. This article aims to develop a method to assess the possible decrease of the emissions from ships in ports, considering human factor influence. The method has been developed and verified on the selected case study example. The influence of ships’ crew and ports pilots’ qualification on time spent on maneuvering operations by ships in port areas and consequently the volume of emissions has been investigated. The research results show that for the set conditions it is possible to reduce emissions from ships up to 12.5%. For that reason, appropriate education and training are needed to improve the qualifications of decision-makers performing ship maneuvers at ports areas.

Port tugs are an important element in port activity and navigational safety issues. Port tugs ensure the safety of big ships while they are entering, manoeuvring, mooring and unmooring, and are of huge importance during other port operations. At the same time, optimizing the number of port tugs and tug bollard pull is also important from a port navigational safety and economic point of view. Calculation and evaluation methods of the optimal request for tugs bollard pull, in particular, port operations, are very important in order to guarantee the navigational safety of the port and ships during the main ship operations in the port. This article provides the number of requested port tugs and bollard pull calculation and evaluation methods on the basis of forces and moments acting on ships. On the basis of real ship voyages and manoeuvring at ports data as well as high accuracy simulators, theoretical methods were used, which were followed by our conclusions and recommendations, which can be used by port harbour masters and tug companies. Modern tugs have become an important element and integral part of modern port navigational safety. Such modern port tugs are also used for navigational safety and other important port functions and activities, such as fire protection and search and rescue operations. The optimal number and capacity evaluation of port tugs depending on port capacity and conditions are studied in this article.

Optimization transportation cargo and passengers between ports and regions are very important, because industrial regions are located some distance from ports. The demand for energy request for the movement of transport is a necessity in the modern world. Transport and activity called transportation are used daily, everywhere, and a lot of energy is needed to power the various transport modes. Today different transport modes are being used to transport passengers and cargo. It is quite common to use road transport, which can transport passengers and cargo from door to door. Considering alternative possibilities (road, railway and/or inland waterway transport), it is important, based on theoretical and experimentation, to identify optimal solutions. In finding transport modes that are either most technically or economically effective, we could unearth possible solutions which would require minimal energy use. Unfortunately, with increased transportation, this often leads to traffic congestion on the roads, which requires additional energy (fuel). This situation generates requirements from many stakeholders in terms of finding ways to decrease the transportation time and energy (fuel) consumed by transport modes. A theoretical method evaluation is conducted on the optimal transportation possibility that minimizes transportation time and energy (fuel) use by employing graph theory, which is presented in this paper. The scientific contribution is the development of a transport modes comparative index, which is then used for evaluations. This paper presents possible alternative transportation conditions based on a multi-criteria evaluation system, proposes a theoretical basis for the optimal solutions from an eco-economic perspective that considers energy, and provides for experimental testing during a specific case study. The final results from the case study provide recommendations and conclusions.

Construction work or other maintenance and repair activities in navigational channels are crucial to ensure and improve ships’ movement on the selected routes. However, during the performance of these works, the ships’ navigation along the construction area becomes more difficult due to the decreased parameters of passages for vessels and the operation of specific equipment on the route, e.g., dredgers and floating cranes. During construction work in navigational channels, it is impossible to stop navigation or limit ships’ parameters because there may not be other possibilities for vessels to reach their planned ports or other dedicated areas. The prior determination of ships’ sailing conditions and restrictions is essential to ensure maritime safety in such areas. The aim of this study is to develop a methodology that allows the precise determination of minimum passage parameters for the navigation of ships sailing through the areas in navigational channels where construction or development works are being carried out. The theoretical basis for the minimum passage parameter calculation is presented. The methodology for assessing the conditions and restrictions of navigation during construction work is proposed. The minimum width of the shipping passages in defined navigational, hydro-meteorological, and hydrological conditions and the possible minimum parameters sufficient to guarantee navigational safety are considered in a case study. The research results may be interesting for port authorities, shipping companies, and other entities involved in the organization of ships’ movement during construction work in navigational channels or other areas.

There is a number of ports where approach or inside navigation channels are located close to the quay walls. In difficult hydrometeorological conditions appropriate speed of ship is needed to keep proper ship’s steering while passing through channel. The ships that pass near the quay walls with high speed create high interaction forces on moored ships and negatively interact on their mooring equipment and quay walls. Ports should ensure relevant maintenance and reliability of quay walls and ships’ mooring equipment. That is why investigation of the ships interaction forces during ship passing near the ships moored to quay walls is very important to find limitations of the passing ship speed depending on passing ship’s parameters, distances and environmental conditions to provide reliable maintenance of navigation channel. In the article the conditions of dynamic forces caused by passing ships are investigated, including possible external forces influencing on moored ships, mooring equipment and quay walls. The methodology to assess the forces exerted on ship moored to quay wall by ship passing close to them is created. On the basis of the case study analysis results, the recommendations for the limitations to ships passing near the ships moored to quay walls were proposed that will allow providing relevant maintenance and reliability of navigation channel and its infrastructure.