P-nitrophenol (PNP), a highly toxic carcinogen, is very stable due to its benzene structure. Advanced oxidation technology is becoming the main means for degrading it. A nano iron-cobalt (Co-nZVI) catalyst, supported by granular activated carbon (GAC), was prepared using liquid-phase reduction, and sodium persulfate’s (PS’s) potential to degrade PNP was studied. The Co-nZVI/GAC nanocomposites were classified, and effects of PS dosage, Co-nZVI/GAC dosage, material system type, PNP concentration, initial pH, and material reuse rate on the reaction were investigated. Activated carbon successfully supported iron and cobalt. At 1 mmol/L of PS, the maximum PNP degradation rate was 99.19%, which was unachievable at other dosages. With only Co-nZVI/GAC present, the rate was 69.8%; with activated persulfate present, it increased to 99.19%. The activated PS system was relatively stable under acidic conditions. Catalysis was induced by adding Co-nZVI/GAC (1.5 g/L). When added four times, the catalytic rate was 57%. Liquid chromatography–mass spectrometry (LC-MS) showed that PNP degradation involves the transfer of PNP to p-benzoquinone (PBQ), the main activators being iron(II) and iron(III) and the key active substances being sulfate (SO42−) and hydroxide (·OH). In conclusion, Co-nZVI/GAC-activated PS effectively removes PNP.
Nitrophenols are toxic substances that present humans and animals with the risk of deformities, mutations, or cancer when ingested or inhaled. Traditional water treatment technologies have high costs and low p-nitrophenol (PNP) removal efficiency. Therefore, an ultraviolet (UV)-activated granular activated carbon supported nano-zero-valent-iron-cobalt (Co-nZVI/GAC) activated persulfate (PS) system was constructed to efficiently degrade PNP with Co-nZVI/GAC dosage, PS concentration, UV power, and pH as dependent variables and PNP removal rate as response values. A mathematical model between the factors and response values was developed using a central composite design (CCD) model. The model-fitting results showed that the PNP degradation rate was 96.7%, close to the predicted value of 98.05 when validation tests were performed under Co-nZVI/GAC injection conditions of 0.827 g/L, PS concentration of 3.811 mmol/L, UV power of 39.496 W, and pH of 2.838. This study demonstrates the feasibility of the response surface methodology for optimizing the UV-activated Co-nZVI/GAC-activated PS degradation of PNP.
5 January 2022 in Desalination and Water Treatment