In order to study the fractal characteristics of the pomegranate biotite schist under the effect of blasting loads, a one-dimensional SHPB impact test was carried out to test the dynamic compressive strength, damage morphology, fracture energy dissipation density, and other parameters of the rocks under different strain rates; besides, sieve tests were conducted to count the mass fractal characteristics of the crushed masses under different strain rates to calculate the fractal dimension of the crushed rock . Finally, the relationships between fractal dimension and dynamic compressive strength, crushing characteristics, and energy dissipation characteristics were analysed. The results show that under different impact loads, the strain rate effect of the rock is significant and the dynamic compressive strength increases with the increasing strain rate, and they show a multiplicative power relationship. The higher the strain rate of the rock, the deeper the fragmentation and the higher the fractal dimension, and the fractal dimension and rock crushing energy density are multiplied by a power relationship. By performing the comparative analysis of the pomegranate biotite schist, a reasonable strain rate range of 78.75 s^-1~82.51 s^-1 and a reasonable crushing energy consumption density range of 0.78 J·cm^-3~0.92 J·cm^-3 were determined. This research provides a great reference for the analysis of dynamic crushing mechanism, crushing block size distribution, and crushing energy consumption of the roadway surrounding rock.

In order to effectively reduce the disturbance of the precrack blasting vibration on slope rock mass, except paying attention to the damping effect of the precrack, it is also necessary to optimize the blasting parameters and initiation mode of the precrack itself. Based on the blasting theory and empirical formula, the parameters of presplitting blasting such as the hole diameter, hole spacing, charge decoupling coefficient, and line charge density were determined, and field tests of conventional pre-splitting blasting and presplitting blasting with precise delay and hole-by-hole initiation were carried out on the west slope of Buzhaoba. Regression analysis was carried out on the vibration monitoring data, and the blasting vibration attenuation regularity of slope particles was obtained. By comparing the monitored vibration velocity of the two presplitting blasting tests and the forecast results of theoretical calculation, the average reduction rate of the conventional same row blasting vibration is 26.40%, while that of the hole-by-hole blasting vibration can reach 41.45% with a half hole rate of 80.7% and an irregularity of about 130 mm. Results show that the effect of precise delay initiation between preholes based on the digital electronic detonator is better than that of the simultaneous initiation of preholes. Therefore, it is suggested that the hole-by-hole presplitting blasting technology should be applied in the excavation of boundary slope and the treatment of high and steep slope.

Considering the difficulty in evaluating pipeline safety in permafrost region, the pipeline disaster safety evaluation index system in permafrost region is analyzed and established. A comprehensive weight determination method based on improved fuzzy analytic hierarchy process, entropy weight method and Lagrange algorithm is proposed, and a fuzzy comprehensive evaluation model of permafrost pipeline safety is established. Taking the disaster safety evaluation of pipeline in the China-Russia crude oil permafrost region as an example, the proposed method is used to determine the comprehensive weight of disaster safety index of permafrost pipeline and carry out comprehensive safety evaluation. The rationality of the comprehensive weight determination method is verified by comparing with the performance of the traditional AHP evaluation method.

In the traditional presplitting blasting, the presplit holes are generally uniformly initiated, which causes local damage to the retained rock mass while forming the damping ditch. In order to determine the optimal delay time of the precise delay initiation hole by hole, the finite element software ANSYS/LS‐DYNA is used to build a blasting model of the concrete, which includes concrete, explosive, and air to simulate the crack forming process of the presplitting hole under various initiation modes. Four kinds of initiation modes for blasting, namely, simultaneous initiation with 0 ms, 9 ms, 12 ms, and 15 ms of delay between adjacent holes, are set up to determine the exact delay time of the best presplitting effect. The simulation results show that when the prehole detonates simultaneously, the inner hole crack penetrates the fastest, but the peak stress around the hole is up to 147.9 MPa. When interhole delayed initiation is used, although the time of interhole crack penetration is prolonged, the stress coupling is generated around the precrack and the maximum stress is obviously reduced. The maximum stress generated under the three delayed initiation conditions is only 76.8 MPa. Considering the requirement of damage control of surrounding rock mass and the rapid formation of precrack, 9 ms delay time is determined as the precise delay time of this test.

In order to study the influence of pillar stopping blasting on the stability of cemented backfill, the dynamic impact test under low strain rate (61.1∼86.8 s⁻¹) was conducted on cemented backfill with two kinds of strength using three‐dimensional coupled static‐dynamic SHPB equipment. At the same time, the strain rate effect of failure mode, dynamic strength factor, and energy transfer of backfill were analyzed. The results show that when the cemented backfill was loaded under different strain rates in the initial three‐dimensional static pressure environment, the pore compaction process was no longer obvious but directly entered the elastic deformation stage. Within the range of strain rates, the extreme value of dynamic intensity factor (DIF) of CTB₂₃₀ was 6.8, while the extreme value of dynamic intensity factor of CTB₃₁₀ specimen did not appear within the range of strain rates due to the improvement of the internal cementation force between particles. The fracture surfaces of specimens were perpendicular to the direction of load, and the failure mode was mainly the axial tensile failure, and the fracture surfaces were mostly close to the loading end. According to energy calculation, reflected energy accounts for 80.4%∼86.6% of incident energy; dissipated energy, 5.5%∼14.3%; transmitted energy, 5.3%∼7.9%.

To investigate the damage fractal and energy dissipation of dolomite marble under blasting load, Dahongshan Copper Mine was selected as the test object and one-dimensional SHPB impact tests with different strain rates were carried out. The dynamic compressive strength, damage morphology, fractal fragmentation, and energy dissipation of the rock were analyzed. The results showed that the absorbed energy per unit volume and the crushing energy per unit mass of dolomite marble are closely related to the dynamic compressive strength. The fractal dimension D of dolomite marble increases with increasing strain rate, and the smaller the average block size of the rock, the degree of crushing deepens. In addition, as the incident energy increases, the crushing energy of the rock also increases, and the energy dissipation intensifies. Finally, after comparative analysis, the reasonable strain rate range is 68.1477.61s⁻¹, and the reasonable specific energy absorption value range is 0.650.98J/cm³. The fractal pattern of rock deformation and damage can be reasonably explained from the perspective of energy dissipation.