The optoelectronic oscillator (OEO) has been widely investigated to generate ultra-pure single-frequency microwave signals. In this study, we propose and experimentally demonstrate an active mode-locking optoelectronic oscillator (AML-OEO), which can generate broadband microwave frequency comb (MFC) signals. An additional intensity modulator is inserted into the OEO as an active mode-locking device for loss modulation to realize phase-locking between adjacent oscillation modes. Through the active mode-locking technique, steady multi-mode oscillation is achieved, which is difficult to realize in a conventional OEO due to the mode-competition effect. By tuning the frequency of the active modulation signal (AMS), both fundamental and harmonic AML-OEOs can be established. In the experiments, MFC signals with a frequency spacing of 195 kHz and 50.115/100.035 MHz are generated with fundamental and harmonic AML-OEOs.
3 August 2021 in Journal of Physics D: Applied Physics
With the development of 5G wireless network and beyond, the wireless carrier frequency will definitely reach millimeter-wave (mm-wave) and even terahertz (THz). As one of the key elements in wireless networks, the local oscillator (LO) needs to operate at mm-wave and THz band with lower phase noise, which becomes a major challenge for commercial LOs. In this article, we investigate the recent developments of the electronic integrated circuit (EIC) oscillator and the optoelectronic oscillator (OEO), and especially investigate the prospect of OEO serving as a qualified LO in the 5G wireless network and beyond. Both the EIC oscillators and OEOs are investigated, including their basic theories of operation, representative techniques and some milestones in applications. Then, we compare the performances between the EIC oscillators and the OEOs in terms of frequency accuracy, phase noise, power consumption and cost. After describing the specific requirements of LO based on the standard of 5G and 6G wireless communication systems, we introduce an injection-locked OEO architecture which can be implemented to distribute and synchronize LOs. The OEO has better phase noise performance at high frequency, which is greatly desired for LO in 5G wireless network and beyond. Besides, the OEO provides an easy and low-loss method to distribute and synchronize mm-wave and THz LOs. Thanks to photonic integrated circuit development, the power consumption and cost of OEO reduce gradually. It is foreseeable that the integrated OEO with lower cost may have a promising prospect in the 5G wireless network and beyond.
A novel photonic approach for generating switchable multi-format chirp RF waveforms is proposed and experimentally demonstrated. The key component in the scheme is a dual-parallel Mach–Zehnder modulator (DPMZM). By properly setting the bias voltage on the DPMZM, different chirp RF waveforms with a doubled bandwidth, including the dual-, up-, and down-chirp waveforms, can be generated, when an unmodulated RF signal and a chirp RF signal are injected. The experiments are implemented to demonstrate the generation of switchable chirp waveforms with bandwidths of 2 and 0.8 GHz. The proposed scheme features its compact structure, easiness in switching control, as well as bandwidth doubling, which has potential applications in multifunctional radars.
A novel approach to realizing compressive sensing (CS) of sparse radio frequency (RF) signals based on photonic random demodulation (RD) is proposed. The key function of mixing the RF signal under test and the bipolar pseudo-random binary sequence (PRBS) in photonic RD is implemented with a single dual-electrode Mach–Zehnder modulator (DEMZM). By properly setting the DC bias of the DEMZM at and the voltages of the PRBS at , a pure desired multiplication term between the signal and the bipolar PRBS is obtained after an AC-coupled photodetector (PD), which not only simplifies the modeling of the CS link but also improves the recovery performance. A proof-of-concept experiment is demonstrated where a sparse signal with spectral components of 500 MHz and 950 MHz is successfully identified with a compression ratio of 20. Simulation results are also given to show the advantage of the given photonic CS scheme with bipolar random mixing.
In this paper, we propose a novel photonic approach for generating arbitrary waveform. The approach is based on the property of real-time Fourier transform in the temporal Talbot effect, where the spectrum of the modulating analog signal is converted into the output time-domain waveform in each period. We present a concise and strict theoretical framework to reveal the relationship of real-time Fourier transform between the optical signals before and after the dispersion. A proof-of-concept experiment is implemented to validate the presented theoretical model. We propose to generate symmetrical or asymmetrical arbitrary waveforms by using double-sideband or single-sideband modulation, respectively, which is verified by simulation results. It is shown that the given approach can be used to generate a repetition-rate multiplied optical pulse train with arbitrary waveform by simply using a multi-tone RF signal with appropriate frequencies and powers.