Research conducted so far on the presence of microplastics in the environment shows that these items are ubiquitous pollutants and therefore constitute an inherent part of our lives. This constitutes a significant problem in many aspects, and one of them is the correct identification of microplastics in environmental samples. Environmental samples can be easily contaminated by plastic microparticles from other sources if proper precautions are not taken during sampling and analysis. The consequence of not taking this cross-contamination into account when analysing the results may be their significant overestimation. This review aims to draw attention to the problem of cross-contamination that accompanies the collection and analysis of samples for the presence of microplastics, and to discuss this issue in a comprehensive manner. The article indicates potential sources of cross-contamination, lists the mitigation methods, and describes the possibilities of assessing this type of contamination. Moreover, the review examines how cross-contamination control appears in practice, based on the available literature data.
Halloysite particles, with their unique multilayer nanostructure, are demonstrated here as highly efficient and readily available sorbent of heavy metals that can be easily scaled up and used in large-scale water remediation facilities. The various methods of raw material purification were applied, and their effects were verified using techniques such as BET isotherm (determination of specific surface area and size of pores), XRF analysis (composition), and SEM imaging (determination of morphology). A series of adsorption experiments for aqueous solutions of metal ions (i.e., lead, cadmium) were carried out to quantify the sorption capacity of halloysite particles for selected heavy metals. The ability of adequately activated halloysite to efficiently remove heavy metal ions from water solutions was confirmed. The value of the zeta potential of raw and purified halloysite particles in water was determined. This enables us to understand its importance for the sorption of positively charged ions (metal, organics) at various pH values. The adsorption process conducted in the pH range of 6.0–6.5 showed significant improvement compared to the acidic conditions (pH value 3.0–3.5) and resulted in a high sorption capacity of lead ions—above 24.3 mg/g for the sulphuric acid-treated sample. The atomic scale ab initio calculations revealed a significant difference in adsorption energy between the external siloxane surface and cross-sectional interlayer surface, resulting in pronounced adsorption anisotropy. A low energy barrier was calculated for the interlayer migration of heavy metals into the halloysite interior, facilitating access to the active sites in these regions, thus significantly increasing the sorption capacity and kinetics. DFT (density functional theory) calculations supporting this study allowed for predicting the sorption potential of pure halloysite structure towards heavy metals. To confront it with experimental results, it was crucial to determine proper purification conditions to obtain such a developed structure from the mineral ore. The results show a massive increase in the BET area and confirm a high sorption potential of modified halloysite towards heavy metals.
26 February 2004 in Chemical Engineering & Technology
Separation of emulsified water from a low sulfur diesel fuel using coalescence filtration was studied in this work. Multilayer coalescence elements were manufactured in-house using the meltblow technique with or without an electric field applied directly to jets of molten polypropylene. The results were compared with coalescence elements made of fiberglass. Hydrophobic media are usually not recommended for coalescence filters applied in dewatering applications. However, experimental results presented in this work show that a properly designed and prepared nanofibrous structure performs with good separation efficiency, while maintaining the pressure drop on a relatively low level.
1 September 2013 in Chemical and Process Engineering: New Frontiers
In this study, the process of membrane cleaning by supercritical fluid extraction was investigated. Polypropylene microfiltration membranes, contaminated with oils, were treated in a batch process with a supercritical fluid (SCF). As extractant, pure supercritical carbon dioxide or supercritical carbon dioxide with admixtures of methanol, ethanol and isopropanol were used. Single-stage and multi-stage extraction was carried out and process efficiency was determined. The obtained results showed that addition of organic solvents significantly enhances the cleaning performance, which increases with increase of organic solvent concentration and decreases with increasing temperature. All three solvents showed a comparable effect of efficiency enhancement. The results confirmed that supercritical fluid extraction can be applied for polypropylene membrane cleaning.