Fused deposition modeling (FDM) is a commonly used additive manufacturing (AM) technique that creates prototypes and parts with intricate geometrical designs. It is gaining popularity since it enhances products by removing the need for expensive equipment. The printed item's mechanical properties...
31 March 2024 in Advances in Science and Technology Research Journal
Fused deposition modeling (FDM) technology is one of the rapidly growing techniques used for producing various complicated configurations without the need for any tools or continuous human intervention. However, a low quality of surfaces results for the layered production used in FDM. It is...
Tungsten carbide (WC-Co) with a cobalt binder has been widely used in industrial application. Through their high wear resistance and hardness, which make it a challenge to machine. Electrochemical discharge machining (ECDM) is a newly developed hybrid technique used to machine conductive and nonconductive materials. Tungsten carbide machining is an area that needs more investigation. In this study, different types of electrolytes have been tested in the electrochemical machining of tungsten carbide. It has been concluded that tungsten carbide was successfully machined with electrolytes that were either neutral salts or a combination of neutral salts and hydroxides, the highest material removal rate achieved was (0.09250 g/min), and the average surface roughness achieved in this work was measured at (Ra 0.9275 µm). However, deposition took place on the surface of machined tungsten carbide when the samples were treated with sodium hydroxide and potassium hydroxide. EDX analysis of successfully machined tungsten carbide samples reveal the presence of carbon (C) due to diffusion from the base material and oxygen (O), most likely due to oxidation brought on by the high temperatures utilized. Scanning electron microscopy confirmed that the machined surfaces had craters, pores, restricted microcracks, and re-deposited melt particles, among other things.
3 November 2025 in Applied Mechanics and Materials
Steel alloys made of sheet metal are important materials because of their high strength applications in construction, automobiles, ships, aircraft, and military products. Among the best and fastest non-traditional ways to cut sheet metal these days is laser cutting. Therefore, it's important to comprehend how the parameters of LC affect the quality of the cut. A thorough analysis was provided to find out which LC parameters have the greatest impact on cutting quality as well as how they affect the kerf quality and cut surface. An overview of the benefits of LC over other machining techniques was provided. Furthermore, an explanation of the various laser sources and the laser cutting technique were given. by eliminating each source's spectrum of cut material thicknesses and their benefits. Graphs and formulae provided a detailed illustration of the cutting performance characteristics. Tables and graphs that display the whole classification of the examined papers were used to utilized to arrange the discussion and analysis of the research into such a detailed discussions. It was discovered that Steel alloys are the most commonly used for laser cutting (59%), followed by aluminum alloys (13%) and titanium alloys (12%). While other subjects constitute 16% of research in this field It was also found that The most common parameters utilized as controls are cutting speed (30%), Laser power (23%), Assist gas pressure (21%), Pulse frequency (9%) and Focal position (7%), in general the ideal parameters to achieve low (SR), small (HAZ) width, small (KW) and small (KT) are low (Pu), high (V), medium (P), high (SOD), medium (PF), medium (PW), small (ND), small (T), and N2 as an assist gas.