The application of the dynamic stiffness method (DSM) for free-vibration analysis of beams is surveyed in this paper. The historical development of the DSM, which has taken place in several stages, is discussed in detail with reference to the free-vibration problems of beams. In particular, the suitability of the DSM in solving the free-vibration problems of beams through the application of the well-known Wittrick–Williams algorithm as a solution technique is highlighted. The literature concerning homogeneous isotropic metallic beams, for which the DSM is well established, is reviewed first, after which, with the rapid and ongoing emergence of advanced composite materials, the development of the DSM in solving the free-vibration problems of anisotropic beams is discussed. The free-vibration analysis of functionally graded beams using the DSM is also highlighted. The survey covers the DSM application for free-vibration analysis of a wide range of beams, including sandwich beams, rotating beams, twisted beams, moving beams and bending-torsion coupled beams, amongst others. Some aspects of the contributions made by the author and his research team are also highlighted. Finally, the future potential of the DSM in solving complex engineering problems is projected.
1 January 2019 in International Journal of Mechanical Sciences
This paper is concerned with the dynamic stiffness formulation and its application for a Bernoulli-Euler beam carrying a two degree-of-freedom spring-mass system. The effect of a two degree-of-freedom system kinematically connected to the beam is represented exactly by replacing it with equivalent stiffness coefficients, which are added to the appropriate stiffness coefficients of the bare beam. Numerical examples whose results are obtained by applying the Wittrick-Williams algorithm to the total dynamic stiffness matrix are given and compared with published results. Applications of the theory include the free vibration analysis of frameworks carrying two degree-of-freedom spring-mass systems.
12 October 2021 in Journal of Vibration and Control
Several models within the framework of continuum mechanics have been proposed over the years to solve the free vibration problem of micro beams. Foremost amongst these are those based on non-local elasticity, classical couple stress, gradient elasticity and modified couple stress theories. Many of these models retain the basic features of the Bernoulli–Euler or Timoshenko–Ehrenfest theories, but they introduce one or more material scale length parameters to tackle the problem. The work described in this paper deals with the free vibration problems of micro beams based on the dynamic stiffness method, through the implementation of the modified couple stress theory in conjunction with the Timoshenko–Ehrenfest theory. The main advantage of the modified couple stress theory is that unlike other models, it uses only one material length scale parameter to account for the smallness of the structure. The current research is accomplished first by solving the governing differential equations of motion of a Timoshenko–Ehrenfest micro beam in free vibration in closed analytical form. The dynamic stiffness matrix of the beam is then formulated by relating the amplitudes of the forces to those of the corresponding displacements at the ends of the beam. The theory is applied using the Wittrick–Williams algorithm as solution technique to investigate the free vibration characteristics of Timoshenko–Ehrenfest micro beams. Natural frequencies and mode shapes of several examples are presented, and the effects of the length scale parameter on the free vibration characteristics of Timoshenko–Ehrenfest micro beams are demonstrated.
4 November 2022 in Journal of Vibration and Acoustics
In this paper, the theory of a Timoshenko–Ehrenfest beam is revisited and given a new perspective with particular emphasis on the relative significances of the parameters underlying the theory. The investigation is intended to broaden the scope and applicability of the theory. It has been shown that the two parameters that characterize the Timoshenko–Ehrenfest beam theory, namely the rotary inertia and the shear deformation, can be related, and hence, they can be combined into one parameter when predicting the beam’s free vibration behavior. It is explained why the effect of the shear deformation on the free vibration behavior of a Timoshenko–Ehrenfest beam for any boundary condition will be always more pronounced than that of the rotary inertia. The range of applicability of the Timoshenko–Ehrenfest beam theory for realistic problems is demonstrated by a set of new curves, which provide considerable insights into the theory.
This paper extends the Wittrick-Williams (W-W) algorithm for hybrid dynamic stiffness (DS) models connecting any combinations of line and point nodes. The principal novelties lie in the development of both the DS formulation and the solution technique in a sufficiently systematic and general manner. The parent structure is considered to be in the form of two dimensional DS elements with line nodes, which can be connected to rigid/spring point supports/connections, rod/beam point supports/connections, and point connections to substructures. This is achieved by proposing a direct constrain method in a strong form which makes the modeling process straightforward. For the solution technique, the W-W algorithm is extended for all of the above hybrid DS models. No matrix inversion is needed in the proposed extension, making the algorithm numerically stable, especially for complex built-up structures. A mathematical proof is provided for the extended W-W algorithm. The proposed DS formulation and the extended W-W algorithm are validated by the FE results computed by ANSYS. This work significantly extends the application scope of the DS formulation and the W-W algorithm in a methodical and reliable manner, providing a powerful eigenvalue analysis tool for beam-plate built-up structures.