Muhammad Rashid

Mr. Muhammad Rashid

Department of Electrical Engineering The Islamia University of Bahawlpur
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 August 2024 in Railway Sciences
Verified
Journal Article
Open access
PDF file
RHRabia Hassan
Rabia Hassan
Zeeshan Ahmad ArfeenZeeshan Ahmad Arfeen
Zeeshan Ahmad Arfeen
MAMehreen Kausar Azam
Mehreen Kausar Azam
ZAZain Ul Abiden Akhtar
Zain Ul Abiden Akhtar
ASAbubakar Siddique
Abubakar Siddique
MRMuhammad Rashid
Muhammad Rashid
Purpose: Material selection, driven by wide and often conflicting objectives, is an important, sometimes difficult problem in material engineering. In this context, multi-criteria decision-making (MCDM) methodologies are effective. An approach of MCDM is needed to cater to criteria of material assortment simultaneously. More firms are now concerned about increasing their productivity using mathematical tools. To occupy a gap in the previous literature this research recommends an integrated MCDM and mathematical Bi-objective model for the selection of material. In addition, by using the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), the inherent ambiguities of decision-makers in paired evaluations are considered in this research. It goes on to construct a mathematical bi-objective model for determining the best item to purchase.Design/methodology/approach: The entropy perspective is implemented in this paper to evaluate the weight parameters, while the TOPSIS technique is used to determine the best and worst intermediate pipe materials for automotive exhaust system. The intermediate pipes are used to join the components of the exhaust systems. The materials usually used to manufacture intermediate pipe are SUS 436LM, SUS 430, SUS 304, SUS 436L, SUH 409 L, SUS 441 L and SUS 439L. These seven materials are evaluated based on tensile strength (TS), hardness (H), elongation (E), yield strength (YS) and cost (C). A hybrid methodology combining entropy-based criteria weighting, with the TOPSIS for alternative ranking, is pursued to identify the optimal design material for an engineered application in this paper. This study aims to help while filling the information gap in selecting the most suitable material for use in the exhaust intermediate pipes. After that, the authors searched for and considered eight materials and evaluated them on the following five criteria: (1) TS, (2) YS, (3) H, (4) E and (5) C. The first two criteria have been chosen because they can have a lot of influence on the behavior of the exhaust intermediate pipes, on their performance and on the cost. In this structure, the weights of the criteria are calculated objectively through the entropy method in order to have an unbiased assessment. This essentially measures the quantity of information each criterion contribution, indicating the relative importance of these criteria better. Subsequently, the materials were ranked using the TOPSIS method in terms of their relative performance by measuring each material from an ideal solution to determine the best alternative. The results show that SUS 309, SUS 432L and SUS 436 LM are the first three materials that the exhaust intermediate pipe optimal design should consider.Findings: The material matrix of the decision presented in Table 3 was normalized through Equation 5, as shown in Table 5, and the matrix was multiplied with weighting criteria ß_j. The obtained weighted normalized matrix V_ij is presented in Table 6. However, the ideal, worst and best value was ascertained by employing Equation 7. This study is based on the selection of material for the development of intermediate pipe using MCDM, and it involves four basic stages, i.e. method of translation criteria, screening process, method of ranking and search for methods. The selection was done through the TOPSIS method, and the criteria weight was obtained by the entropy method. The result showed that the top three materials are SUS 309, SUS 432L and SUS 436 LM, respectively. For the future work, it is suggested to select more alternatives and criteria. The comparison can also be done by using different MCDM techniques like and Choice Expressing Reality (ELECTRE), Decision-Making Trial and Evaluation Laboratory (DEMATEL) and Preference Ranking Organization Method for Enrichment Evaluation (PROMETHEE).Originality/value: The results provide important conclusions for material selection in this targeted application, verifying the employment of mutual entropy-TOPSIS methodology for a series of difficult engineering decisions in material engineering concepts that combine superior capacity with better performance as well as cost-efficiency in various engineering design.

29 December 2022 in International Journal of Ambient Energy
Verified
Journal Article
Closed access
DSDr. Rabia Shakoor
Dr. Rabia Shakoor
SHSawera Hameed
Sawera Hameed
ARAbdur Raheem
Abdur Raheem
MRMuhammad Rashid
Muhammad Rashid
Zeeshan Ahmad ArfeenZeeshan Ahmad Arfeen
Zeeshan Ahmad Arfeen

22 December 2021 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
MRMuhammad Rashid
Muhammad Rashid
SKSana Kanwal
Sana Kanwal
SGSana Ghafar
Sana Ghafar
KNKomal Nawwal
Komal Nawwal
SASana Ajmal
Sana Ajmal
SRSaima Rasib
Saima Rasib
Soil texture is an important environmental factor that influences the crop productivity of wheat (Triticum aestivum) because it provides all the nutrients required for growth of the plants. The soil based on nutrients is classified into four classes: silt, clay, sand, and loam. Soil based on mineral particles was classified by the United States Department of Agriculture (USDA). According to USDA, loam particles have a size between sand (2.00–1.0 mm) and silt (0.05–0.002 mm), whereas clay is less than 0.002 mm. Analysis shows that the growth rate of Triticum aestivum in each soil sample is different. The sizes of seven plants were increased in loamy soil, to 47 cm, whereas in sandy soil, plants were 25 cm long. Seven plants were grown in clay soil, and had lengths of 28 cm. Finally, five plants were grown in silt soil, and reached a size of 38 cm. After fertilizing each plant in the different soils equally, that the productivity of plants in loamy soil was observed to be greater as compared to plants of other soil samples. Clay soil plants showed improvements as compared to sand and silt soil, although not as good as loam. The worst growing plants were observed in sandy soil. This shows that the growth of Triticum aestivum plants is better in loamy soil, and loamy soil is the most beneficial for wheat crop productivity.

22 December 2021 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
SKSana Kanwal
Sana Kanwal
MRMuhammad Rashid
Muhammad Rashid
SGSana Ghafar
Sana Ghafar
KNKomal Nawwal
Komal Nawwal
SASana Ajmal
Sana Ajmal
SRSaima Rasib
Saima Rasib
Fenugreek (Trigonella foenum-graecum) is an aromatic plant that yields secondary metabolites, continuously used for the readiness of food and medicines. The current study is conducted to assess the impact of inoculation of mycorrhiza on the growth of Trigonella foenum-graecum in different soil samples. The current study presents two arrangements of treatment in experimental and control pots. Different soil samples were obtained from different areas for experimental and control pots. In experimental pots, mycorrhiza fungi inoculation is introduced. The six pots were filled with each soil sample. Out of the six pots, three were control pots, and three were inoculated pots. In each pot, 6 kg soil was filled. It was observed that there were more leaves in the experimental (inoculated) pots and fewer in the fenugreek (non-inoculated) pots. The fresh and dry weight of the shoots and roots was taken. However, it was examined that the fresh weight of the shoots and roots of the inoculated pots was more compared to the non-inoculated pots. But the difficulty is seen in the clay control pots of clay soil because of the compactness of the clay soil. It was concluded that fenugreek showed more growth in inoculated pots compared to non-inoculated pots. It was also concluded that mycorrhizal fungal showed symbiotic association with fenugreek plants.

15 December 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
MRMuhammad Rashid
Muhammad Rashid
ARAbdur Raheem
Abdur Raheem
DSDr. Rabia Shakoor
Dr. Rabia Shakoor
MMMuhammad Idrees Masud
Muhammad Idrees Masud
Zeeshan Ahmad ArfeenZeeshan Ahmad Arfeen
Zeeshan Ahmad Arfeen
TJTouqeer Ahmed Jumani
Touqeer Ahmed Jumani
An optimal topographical arrangement of Wind Turbines (WTs) is essential for increasing the total power production of a Wind Farm (WF). This work introduces PSO-GA, a newly formulated algorithm based on the hybrid of Particle Swarm Optimization (PSO) and the Genetic Algorithm (GA) method, to provide the best possible and reliable WF Layout (WFL) for enhanced output power. Because GA improves on PSO-found solutions while PSO investigates several regions, PSO-GA can effectively handle issues with multiple local optima. In the first phase of the framework, PSO improves the original variables; in the second phase, variables are changed for improved fitness. The goal function takes into account both the power production of the WF and the total cost of WTs while analyzing wake upshot using the Jenson-Wake model. To evaluate the robustness of this strategy, three case studies are analyzed. The algorithm identifies the best possible position of turbines and strictly complies with industry-standard separation distances to prevent extreme wake interference. The comparative study with the past layout improvement process models demonstrates that the proposed hybrid algorithm has enhanced performance with the power improvement of 0.03-0.04% with the p value< 0.01 and 24-27.3% reduction in the wake loss. The above findings indicate that the proposed PSO-GA can be better than the other innovative methods, especially in the aspects of quality and consistency of the solution.

29 January 2026 in Wind
Verified
Journal Article
Open access
PDF file
MRMuhammad Rashid
Muhammad Rashid
ARAbdur Raheem
Abdur Raheem
DSDr. Rabia Shakoor
Dr. Rabia Shakoor
MMMuhammad Idrees Masud
Muhammad Idrees Masud
Zeeshan Ahmad ArfeenZeeshan Ahmad Arfeen
Zeeshan Ahmad Arfeen
TJTouqeer Ahmed Jumani
Touqeer Ahmed Jumani
An optimal topographical arrangement of wind turbines (WTs) is essential for increasing the total power production of a wind farm (WF). This work introduces PSO-GA, a newly formulated algorithm based on the hybrid of Particle Swarm Optimization (PSO) and the Genetic Algorithm (GA) method, to provide the best possible and reliable WF layout (WFL) for enhanced output power. Because GA improves on PSO-found solutions while PSO investigates several regions; therefore, hybrid PSO-GA can effectively handle issues involving multiple local optima. In the first phase of the framework, PSO improves the original variables; in the second phase, the variables are changed for improved fitness. The goal function takes into account both the power production of the WF and the cost per power while analyzing the wake loss using the Jenson wake model. To evaluate the robustness of this strategy, three case studies are analyzed. The algorithm identifies the best possible position of turbines and strictly complies with industry-standard separation distances to prevent extreme wake interference. This comparative study on the past layout improvement process models demonstrates that the proposed hybrid algorithm enhanced performance with a significant power improvement of 0.03–0.04% and a 24–27.3% reduction in wake loss. The above findings indicate that the proposed PSO-GA can be better than the other innovative methods, especially in the aspects of quality and consistency of the solution.