We propose and experimentally demonstrate a directional torsion sensor based on a Mach-Zehnder interferometer formed in a multicore fiber (MCF) with a ~570-μm-long helical structure (HS). The HS was fabricated into the MCF by simply pre-twisting and then heating with a CO₂ laser splicing system. This device shows the capability of directional torsion measurement from −17.094 rad/m to 15.669 rad/m with the sensitivity of ~0.118 nm/(rad/m). Moreover, since the multiple interferences respond differently to torsion and temperature simultaneously, the temperature cross-sensitivity of the proposed sensor can be eliminated effectively. Besides, the sensor owns other merits such as easy fabrication and good mechanical robustness.

We present the fabrication of fiber Bragg gratings (FBGs) in a trench-assisted heterogeneous multicore fiber (MCF). Two obviously different Bragg reflection peaks are obtained due to the slight difference of refractive indices between the center core and the outer cores. To investigate the reflections of the two FBGs simultaneously, only a segment of multimode fiber is inserted between the lead-in single mode fiber and the MCF. The experimental results confirm that the curvature sensitivity of the FBG in the outer core is a sinusoidal function of the bending orientation angle. The maximum linear curvature sensitivity is about 0.128 nm/m ⁻¹ . The cross sensitivity to temperature or externally applied axial strain can be eliminated by discriminating the different responses of FBGs inscribed in outer cores and the center core. Thus this MCF with FBGs can be utilized as a directional bending sensor. Moreover, the proposed sensor offers several advantages, such as low cost and flexibility in fabrication.

Optical fiber sensors for strain measurement have been playing important roles in structural health monitoring for buildings, tunnels, pipelines, aircrafts, and so on. A highly sensitive strain sensor based on helical structures (HSs) assisted Mach-Zehnder interference in an all-solid heterogeneous multicore fiber (MCF) is proposed and experimentally demonstrated. Due to the HSs, a maximum strain sensitivity as high as −61.8 pm/με was experimentally achieved. This is the highest sensitivity among interferometer-based strain sensors reported so far, to the best of our knowledge. Moreover, the proposed sensor has the ability to discriminate axial strain and temperature, and offers several advantages such as repeatability of fabrication, robust structure and compact size, which further benefits its practical sensing applications.

We report on a compact sensor by integrating a Mach-Zehnder interference and a cladding Bragg grating in a same section of all-solid photonic bandgap fiber. Theoretical investigation reveals that the Bragg grating resonance stems from the coupling of counter-propagating cladding LP₀₁-like supermodes and the Mach-Zehnder interference works between a LP₀₁-like supermode and LP₀₁ core mode. Compared with the interference fringe, such supermode grating dip responses to axial strain in a more sensitive and opposite-direction manner. Whereas, the interference fringe shows a higher temperature sensitivity than the supermode grating dip. By means of these different responses, this device finds a useful application in the discrimination of temperature and axial strain.

We report on a high-performance curvature sensor based on a long-period grating (LPG) in a dual-concentric-core fiber (DCCF). The LPG is inscribed to couple light from the fundamental mode of the central core to the ring-core modes, resulting in the generation of a series of resonant dips. Two adjacent dips shift toward each other when the LPG is bent. By monitoring the variation of the wavelength interval between these two dips, this LPG can be applied in curvature measurement with a sensitivity as high as $-9.046\mathrm{nm}/{\mathrm{m}}^{-1}$. More importantly, such a wavelength interval is almost immune to the cross impacts of temperature and axial strain, since the sensitivities to temperature and axial strain are only 2.6 pm/°C and 0.083 pm/με, respectively.

Specialty fibers have introduced new functionalities and opportunities in distributed fiber sensing applications. Particularly, Brillouin optical time domain analysis (BOTDA) systems have leveraged the unique features of specialty fibers to achieve performance enhancement in various sensing applications. This paper provides an overview of recent developments of the specialty fibers based BOTDA technologies and their sensing applications. The specialty fibers based BOTDA systems are categorized and reviewed based on the new features or performance enhancements. The prospects of using specialty fibers for BOTDA systems are discussed.