In this paper, we consider the problem of 3D path generation and tracking for unmanned air vehicles (UAVs). The proposed path generation algorithm allows us to find a path satisfying arbitrary initial and final conditions, specified in terms of position and velocity. Our method assumes that most of aircraft structural and dynamic limitations can be translated in a turn radius constraint; therefore, the generated paths satisfy a constraint on the minimum admissible turning radius. The proposed algorithm for the path tracking guarantees, under specified assumptions, that the tracking error, both in position and in attitude, asymptotically tends to zero. The work has been carried out with reference to the UAV of the Italian Aerospace Research Center (CIRA). Simulation results for both the path generation and the tracking algorithms are presented; the latter have been obtained using a detailed 6-degree-of-freedom model of the CIRA UAV in the presence of wind and turbulence

In recent years, significant emphasis has been devoted to progresses in the field of on-board trajectory generation and tracking for aircraft guidance along specified waypoints. Research in this area was mainly driven by the request of improved on-board autonomy for both unmanned aerial systems and manned civil aircrafts. Several algorithms and systems have been developed and patented in this field, addressing both 3D waypoints, which are specified in terms of their three dimensional coordinates and, more recently, 4D waypoints, which also include a required time to arrival. Of course, patents proposed for 3D/4D trajectory management systems are characterized by their key features (use of 3D or 4D constraints, of different waypoint capture concepts, and so on) and by different applications and algorithms. In this paper, a review is performed of the most relevant patents presented in recent years in this field. This review considers the various problems, emphasizing main advantages and weaknesses of the proposed solutions and suggesting some possible future developments.

In this article, an algorithm for three-dimensional path generation and tracking for unmanned air vehicles in the presence of no-fly zones is proposed. The algorithm is based on a local optimization procedure aimed to find the shortest path between the waypoints in compliance with all path constraints. Vehicle structural and envelope limitations are accounted for by simple geometric constraints such as minimum curvature radius and flight path angle limitations, while no-fly zones are defined as cylindrical objects with infinite altitude. The algorithm is simple and it has a limited computational burden, at most quadratic with the number of zones to avoid. This makes the algorithm very suitable for real-time applications even in case of a high number of forbidden zones. Algorithm effectiveness has been demonstrated by means of numerical simulations in scenarios including the presence of no-fly zones not known before flight (for instance, in the case of sudden changes of weather conditions and/or detection of new fixed obstacles).

Collision Detection and Avoidance is one of the critical technologies for fully allowing Unmanned Aerial Systems to fly in civil airspaces. Current methods evaluate only potential conflicts with other aircraft using specific parameters (e.g., time or distance to closest point of approach) that can only be used for pair-wise encounters, not considering the surrounding environment. The present work proposes a new Collision Detection and Avoidance concept to solve short-term conflicts in scenarios characterized by the simultaneous presence of aircraft and other path constraints (i.e., no-fly zones, bad weather areas and terrain) including geo-fencing limitations. Differently from other open literature methods, the proposed algorithm computes two parameters that synthetically describe the conflict hazard level of a given scenario and its possible evolution, independently from the type and the number of surrounding potential threats. Using such indices, a risk evaluation strategy is proposed that detects hazardous situations and generates an optimal maneuver avoiding potential collisions while not causing secondary conflicts. The effectiveness of the proposed algorithm is demonstrated by means of fast-time and real time simulations in some challenging conflict scenarios that cannot be solved by state of the art Detect and Avoid systems.

The full integration of Remotely Piloted unmanned vehicles into civil airspace requires first and foremost the integration of a traffic Detect and Avoid (DAA) system into the vehicle. The DAA system supports remote pilots in performing their task of remaining Well Clear from other aircraft and avoiding collisions. Several studies related to the design of a Remain Well Clear function have been performed that served as input for the development of technical standards applicable to non-European countries. In this paper, a Remain Well Clear implementation is proposed that, using the results of past international projects, fits European airspace needs and specificities and can be acceptable to both remote pilots and air traffic controllers, with only minimal impact on the standard operating procedures used for manned aircraft. The proposed Remain Well Clear software has been successfully validated through real-time simulations with pilots and controllers in the loop considering traffic encounters and mission scenarios typically found in European airspace. The achieved results highlight the appropriate situational awareness provided by the proposed RWC function and its effective support to the remote pilot in making adequate decisions in conflict solving. Real-time simulation tests showed that, in almost all cases, an RWC maneuver is successfully performed, giving the RP sufficient time to assess the conflict, coordinate with the controller, if needed, and execute the maneuver. The fundamental role of the proposed RWC function has been especially evident in uncontrolled airspace classes where the controller does not provide any separation provision. Moreover, its effectiveness has also been tested in encounters with aircraft flying under visual flight rules in controlled airspace, where the controller is not informed or has less information regarding these aircraft. The results from validation tests imply two key potential safety benefits, namely: the mitigation of performing a collision avoidance maneuver and the prevention of potential conflict while not disrupting the traffic flow with possible further consequences of generating other potentially hazardous situations.

Control Allocation (CA) in aviation is the problem of distributing the commands among the available actuation means, in order to ensure the achievements of the moments requested by the flight control laws. CA plays a key role in fault-tolerant control systems since it gives robust performances and stability also in presence of faults to one or more aircraft actuators. In this study, a new algorithm is proposed for Control Allocation under both static and dynamic constraints. The proposed algorithm aims at overcoming the most common limitations of the existing algorithms, most of which do not account for actuator dynamics (i.e. they compute a control command that might not be compatible with aircraft performance limitations) and rely on iterative methods. The proposed approach does not need an iterative procedure because it rearranges the CA as a state observer problem in which observer states are the actual commands to actuators and observer measurements are the requested moments by the flight control laws. The observer is implemented through a Kalman Filter (KF), with the actuator dynamics as process model and the algebraic relationships between moments and commands as measurement model. The effectiveness of the proposed CA strategy has been shown through a numerical analysis. The numerical simulations showed that the control commands computed by Control Allocation algorithms guarantee moments that match the ones requested by the attitude control laws. This has been verified in nominal conditions (i.e. no actuator faults) but also in faulty ones, where one or more actuators are subject to malfunctioning and, furthermore, in simulations scenarios in which aggressive maneuvers led to the saturation of one or more control surfaces.