A comparison of four synthetic approaches for highly photoluminescent blue-emitting Cd0.15Zn0.85S QDs using (Z)-1-(octadec-9-enyl)-3-phenylthiourea as a source of sulfur.
1 February 2021 in Materials Chemistry and Physics
Solid solution AgInS2-ZnS nanostructures were prepared by reacting (Z)-1- (octadec-9-enyl)-3-phenylthiourea and 1-dodecanethiol with the corresponding metal linoleates. The combination of sulfur sources in modified ratios, which individually do not lead to significant results, resulted in the successful formation of nanorod-shaped heterostructures. The effect of sulfur source ratios on the structure, morphology, and optical properties of yellow-red emitting nanocrystals was systematically studied by X-ray diffraction (XRD), energy dispersive X-ray analysis (EDS), X-ray photoelectron spectroscopy (XPS) and scanning transmission electron microscopy (STEM) analyzes. Nanocomposite materials based on polyvinyl toluene co-divinylbenzene (PVT-DVB) were investigated for each of the resulting nanostructures. It was demonstrated that even traces of nanomaterial (∼ 0.1 wt. %) provide a high photoluminescence quantum yield (PL QY up to 61.5%) of prepared nanocomposites.
The surface of any binary or multi-component nanocrystal has imperfections and defects. The number of surface defects depends both on the nature of the nanomaterial and on the method of its preparation. One of the possibilities to confine the number of surface defects is the epitaxial growth of the shell, which leads to a change in the physical properties while maintaining the morphology of the core. To form a shell of the desired thickness, an accurate calculation of the amount of its precursors is substantial to avoid the appearance of individual crystals consisting of the shell material. This study aimed to develop an effective calculation method for the theoretical amount of precursors required for the formation of a ZnS shell on the surface of a Cd0.25Zn0.75Se core, followed by the practical implementation of theoretical calculations and characterization of the prepared nanomaterials. This method allows the complete control of the masses and volumes of the initial reagents, which will in turn prevent undesirable nucleation of nuclei consisting of the shell material. In the synthesis of Cd0.25Zn0.75Se/ZnS core/shell quantum dots (QDs), the sources of chalcogens were substituted seleno- and thioureas, which are capable of not only supplanting modern toxic sources of sulfur and selenium but also allowing one to perform the controlled synthesis of highly photoluminescent QDs with a low number of surface defects. The result of this shell overcoating method was an impetuous augmentation in the photoluminescence quantum yield (PL QY up to 83%), uniformity in size and shape, and a high yield of nanomaterials. The developed synthetic technique of core/shell QDs provides a controlled growth of the shell on the core surface, which makes it possible to transfer this method to an industrial scale.
Semiconductor quantum dots (QDs) have attracted great attention due to their unique optical and chemical properties. An increasing demand for size and shape uniformity of QDs, high quantum yield (QY) and photochemical stability can be resolved by synthetic methods. Here we report a study of the effect of the precursor ratios within the synthesis of a series of Cd–Zn–S QDs. Trisubstituted thiourea (N-phenylmorpholine-4-carbothioamide) as a new and environmentally friendly source of sulphur in the synthesis of Cd0.2Zn0.8S QDs (Cd, Zn : S molar ratios = 1 : 0.5; 1 : 1; 1 : 1.5; 1 : 2; 1 : 2.5) and CdxZn1−xS QDs (where x = 0.1; 0.25; 0.5; 0.75; 0.9) has been investigated. It was determined that an increase in the molar ratio of trisubstituted thiourea to metals leads to the growth of QDs and as a consequence, to a small emission red shift in the visible region of the spectrum. However, no significant changes in the elemental ratio in the material were detected. It was found that with an excess of trisubstituted thiourea taken to the reaction, oleylamine (OAm) as a co-ligand replaces linoleic acid from the protective shell of the QDs. In the case of an increase of Cd content in the CdxZn1−xS QDs, a significant shift in the emission to the red region of the spectrum was observed with an increase in the size of the QDs while their shape was unchanged. Based on the XRD data, a gradual transition from a cubic to a hexagonal crystal structure was detected. The high quantum yield (70%), the narrow photoluminescence (PL) signal (FWHM < 31 nm) and the size uniformity of the obtained nanomaterials are promising features for production of highly sensitive sensors and LEDs.