In this work, multiple ultra-narrow band-stop filters based on metal–insulator–metal (MIM) plasmonic waveguide filters with high efficiency are designed and analyzed numerically. The relationship between incident radiation and transmission spectra is investigated between 0.45 μm and 1.5 μm in the electromagnetic spectrum by finite-difference time-domain (FDTD) method. The designed structures have a bus waveguide coupled with nanoring cavity resonators of different sizes. Minimum transmission is 1.3% at 622 nm. The full width at half maximum (FWHM) is 8.64 nm and the quality factor is obtained as 72.33 in this wavelength. The highest quality factor is 185.48 and the lowest FWHM is 4.2 nm at 779 nm. The designed waveguide-based filters can be used for integrated optical devices from visible to near-infrared regimes.

We present a metamaterial-based perfect absorber (PA) that strongly supports four resonances covering a wide spectral range from 1.8 µm to 10 µm of the electromagnetic spectrum. The designed perfect absorber has metal–dielectric–metal layers where a MgF₂ spacer is sandwiched between an optically thick gold film and patterned gold nanoantennas. The spectral tuning of PA is achieved by calibrating the geometrical parameters numerically and experimentally. The manufactured quad-band plasmonic PA absorbs light close to the unity. Moreover, the biosensing capacity of the PA is tested using a 14 kDa S100A9 antibody, which is a clinically relevant biomarker for brain metastatic cancer cells. We utilize a UV-based photochemical immobilization technique for patterning of the antibody monolayer on a gold surface. Our results reveal that the presented PA is eligible for ultrasensitive detection of such small biomarkers in a point-of-care device to potentially personalize radiotherapy for patients with brain metastases.

Confinement of the light at the subwavelength scale makes photonic devices more efficient in applications such as optical filtering, switching, and sensing with their low dimensions. Metal-insulator- metal waveguide-based configurations present many paths for manipulating light at the wide range of the electromagnetic spectrum. For that purpose, in this study, a wavelength demultiplexer (WDM) based on a metal-insulator-metal (MIM) waveguide is numerically investigated by finite difference time domain (FDTD) method. Proposed WDMs have cascade polygon resonators. After optimizing the fundamental filter, this structure is formed as 1×N demultiplexers. The proposed demultiplexers have two- and three channels. The minimum full width at half-maximum (FWHM) value for these channels is 20.02 nm and the maximum quality factor value is 47.7 at 954.9 nm wavelength. The minimum crosstalk value is obtained as -30.37 dB for this study. The proposed 1×N demultiplexers have potential tools to design low-cost integrated optical circuits for specific wavelengths.

A plasmonic perfect absorber (PA) utilizes high absorption of incident radiation and near-field enhancement which is so advantageous for many applications such as solar cell, infrared (IR) spectroscopy, and refractive index (RI) sensitivity. In this study, the numerically presented PA system has resonances from mid-infrared (MIR) to near-infrared (NIR) regions for different periodicities at 2.0, 2.4, and 2.8 µm. A fine-tuning mechanism is obtained to control the spectral response of PA through the geometrical parameters. Dual-band plasmonic resonances have nearly 98% absorption. Near-field intensity distributions are shown with the enhancement factor of 10³ at the resonance frequencies. Refractive index sensitivity is also analyzed by embedding PA in different cladding mediums to show the sensing performance. Relationship between resonance wavelength and refractive index of the medium is observed for all resonant modes. The highest sensitivity value is 2382.48 nm/RIU and the figure of merit reaches as high as 28.29 RIU⁻¹.

This research focuses on the design and analysis of all-optical Exclusive OR(XOR), NOT, and OR logic gates based on metal-insulator-metal waveguides with elliptical-nanodisk resonators. The functionality of the proposed optical logic gates is determined by constructive and deconstructive signals which are applied to the input ports and control ports. To show the logic 0 (low) and logic 1 (high) output states, the limit of threshold transmission is 1.775 × 10⁻¹³ ∼0. The transmission (T) and contrast ratio (CR) are obtained to present the performance of the optical logic gates via the method of finite-difference time-domain. The maximum transmission is reached for the OR gate as 1.38 and the highest contrast ratio is 124.75 dB for the XOR and NOT logic gates. The designed logic devices are promising for improving more efficient optical signal information processing devices.

All-optical NOT, OR, and Exclusive OR(XOR) logic gates utilizing silicon slot waveguides are proposed and numerically analyzed in this work. The structure has a silicon slab with slot regions such as two input waveguides and square cavity resonators and one output waveguide. The optical spectra of the designed structures are attained with the method of finite difference time domain. The all-optical logic gate features of the design are achieved by applying optical signals with 00 or 1800 phase differences from the input ports. Basic parameters such as transmission spectrum (T), modulation depth (MD), and contrast ratio (CR) are performed to show the optical features and ability of the proposed logic gates. The threshold transmission limit is 1.7% to define the status of the output ports as ON or OFF. At 689.5 nm, the maximum transmission, modulation depth, and contrast ratio are 149%, 97%, and 15.36 dB, respectively.