The market share of organic light-emitting diode (OLED) screens in consumer electronics has grown rapidly in recent years. In order to increase the screen-to-body ratio of OLED phones, under-screen or in-screen fingerprint recognition is a must-have option. Current commercial hardware schemes include adhesive, ultrasonic, and under-screen optical ones. No mature in-screen solution has been proposed. In this work, we designed and manufactured an OLED panel with an in-screen fingerprint recognition system for the first time, by integrating an active sensor array into the OLED panel. The sensor and display module share the same set of fabrication processes when manufactured. Compared with the current widely commercially available under-screen schemes, the proposed in-screen solution can achieve a much larger functional area, better flexibility, and smaller thickness, while significantly reducing module cost. A point light source scheme, implemented by lighting up a single or several adjacent OLED pixels, instead of a conventional area source scheme as in the CMOS image sensor, or a CIS-based solution, has to be adopted since the optical distance is not long enough due to the integration. We designed a pattern for the point light sources and developed an optical unmixing network model to realize the unmixing and stitching of images obtained by each point light source at the same exposure time. After training, data verification of this network model shows that this deep learning algorithm outputs a stitched image of large area and high quality, where FRR = 0.7% given FAR = 1:50 k. In despite of a poorer quality of raw images and a much more complex algorithm compared with current commercial solutions, the proposed algorithm still obtains results comparable to peer studies, proving the effectiveness of our algorithm. Thus, the time required for fingerprint capture in our in-screen scheme is greatly reduced, by which one of the main obstacles for commercial application is overcome.
Conventional color filters selectively absorb a part of the backlight while reflecting or transmitting other light, resulting in the problem of low efficiency and energy wasting. For this problem, a new concept of fluorescence enhanced optical resonator was proposed and verified in this paper. The new structure consists of structural color filter and light-conversion material. Specially, a thin film resonant cavity was designed, and InP/ZnSe/ZnS quantum dots were inserted inside the resonator. When illuminated by sunlight, the novel fluorescence enhanced optical resonator could not only reflect the specific light, but also convert absorbed energy into desired light, leading to the utilization efficiency improvement of solar energy. An all-dielectric red fluorescence enhanced optical resonator was fabricated, with peak equivalent reflectance up to 105%. Compared with a thin film resonator, the enhancement coefficient of the as-proposed structure is about 124%. The new optical structure can utilize solar source efficiently, showing application potential as the next generation of reflective color filters for display.
About Me
Xue Dong is the chief scientist in BOE Technology Group Co., Ltd.
Xue Dong is the chief scientist in BOE Technology Group Co., Ltd.