Membrane structures are lightweight and flexible, and the responses of them are of great importance to evaluate the dynamic characteristics. However, when observing the dynamic responses by using conventional measurements (e.g., laser displacement meter), there are several disadvantages, such as high-cost, low sampling efficiency, and only one-dimensional data being obtained, especially for the membrane structures in the field of civil engineering. Therefore, a stereovision measurement is organized by proposing a series of algorithms which are based on a newly built mathematical model. The calibration toolbox based on OpenCV is adopted for the camera calibration. After that, edge detection, determination of central pixel coordinates, continuous tracking, and matching of circular feature points between different images are solved in the process of image processing. Finally, the new-formed stereovision measurement system is adopted to observe the responses of an open-type one-way tensioned membrane structure in free-vibration and aeroelastic wind tunnel test. After the feasibility and validity of this measurement system are verified, the full field displacement distributions of this tensioned structure under different wind speeds are presented. This successful application implies that such stereovision measurement can make up the disadvantages of the conventional measurements. Such stereovision measurement can be used to measure the responses of the structures in the field of civil engineering.
14 December 2023 in Advances in Structural Engineering
3D concrete printed walls with hollow sections are now widely adopted in 3D concrete printing applications across the construction industry. One of the significant challenges in the printing process is achieving superior surface finishes. Previous research has predominantly focused on the overall geometry of these walls, often neglecting surface finish quality at the intersections of formwork and supporting filaments. This study is dedicated to optimizing the geometric arrangement of supporting filaments and enhancing print quality at these critical intersections. Firstly, two arrangement strategies, the standard approach and the average approach, are introduced to establish high-quality geometric section configurations, with practical demonstrations on both rectangular and arc-shaped walls. Subsequently, the width of concrete filaments is considered to enhance surface finish quality at the intersections. Two print quality control methods, namely the e- Δ control rule and the r- Δ control rule, are then developed. To assess the effectiveness of these arrangement strategies and control methods, configurations of walls with specific dimensions are compared, and printing experiments are conducted. Finally, recommendations for practical application are provided, aimed at improving both the geometric and surface finish quality of 3D concrete printed walls with hollow sections.