Adel El-Zahhar

Prof. Adel El-Zahhar

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 May 2022 in Journal of Coordination Chemistry
Verified
Journal Article
Closed access
GAGamil Alhazmi
Gamil Alhazmi
AEAdel El-Zahhar
Adel El-Zahhar
MEM. G. EL-Desouky
M. G. EL-Desouky
MEMohamed A. El-Bindary
Mohamed A. El-Bindary
AEAshraf El-Bindary
Ashraf El-Bindary
Pollution that arises from textile industries is a serious environmental issue, and successful purifying has thus far proven to be difficult. In this study, environmentally safe Zr-metal-organic frameworks (Zr-MOF) were used to develop a strategy for removing Methylene Blue (MB) from water contaminants. The elimination of MB in wastewater samples by Zr-MOF showed good adsorption capability. SEM, FT-IR, XRD, XPS, and surface area confirmed that Zr-MOF has a large area of 1498 m2/g besides a microporous material having a pore diameter of 1.2 nanometers. The pH of the starting solution, amount of adsorbent used, contact period, and temperature were investigated. The pHPZC of Zr-MOF was 7.5. The adsorption of MB on Zr-MOF adsorbents was determined as sideways interrelations by a monolayer model based on the real gas law (MMRG) and a monolayer model based on the ideal gas law (MMIG). Zr-MOF has good capability for removing MB (1.58 mmol.g−1) and after numerous cycles, this performance remained; up to the sixth cycle, the adsorbent had recyclability of >91.6%. Adsorption experiments demonstrated that adsorption kinetics matched a pseudo-second-order model and the Langmuir equation. Activation energy was 15.87 kJ/mol. The microporous Zr-MOF adsorbent proved to be simple and effective for water purification. Graphical Abstract

9 April 2025 in RSC Advances
Verified
Journal Article
Open access
PDF file
EEEsraa M. El-Fawal
Esraa M. El-Fawal
ANAhmed M. A. El Naggar
Ahmed M. A. El Naggar
AEAdel El-Zahhar
Adel El-Zahhar
MAMajed M. Alghandi
Majed M. Alghandi
AMAsmaa S. Morshedy
Asmaa S. Morshedy
AEArd elshifa Mohammed Elhassan
Ard elshifa Mohammed Elhassan
Biomass-derived residuals represent a vital renewable energy source, offering sustainable alternatives to mitigate fossil fuel dependency, address climate change, and manage waste. Although biomass generally has a lower calorific value (10–20 MJ kg−1) compared to fossil fuels (40–50 MJ kg−1), its energy recovery potential can be enhanced through advanced conversion technologies such as torrefaction, pyrolysis, and gasification. Additionally, biomass is considered carbon neutral when sourced sustainably, as the CO2 released during combustion is reabsorbed by plants during their regrowth cycle, maintaining a balanced carbon flux in the atmosphere. This review explores the diverse sources of biomass and examines their chemical compositions and inherent properties, emphasizing their transformation into valuable energy carriers and bio-products. It provides a comprehensive analysis of thermochemical, biochemical, and physicochemical conversion technologies, detailing their mechanisms, efficiencies and applications. Special attention is given to biochar, a product of biomass pyrolysis, highlighting its potential in pollution mitigation, carbon sequestration, and as a catalyst in industrial applications. The review delves into synthesis processes of biochar and performance-enhancing modifications, illustrating its significant role in sustainable environmental management. Additionally, the economic and ecological advantages of biomass-derived energy, including reduced greenhouse gas emissions and waste reutilization, are critically evaluated, underscoring its superiority over conventional fossil fuels. Challenges limiting the scalability of biomass energy, such as technology costs, process efficiency, and market dynamics, are addressed, alongside prospective solutions. By consolidating extensive research on biomass conversion technologies and engineered biochar applications, this review serves as a valuable resource for researchers and policymakers. It aims to guide advancements in biomass utilization, fostering a transition toward sustainable energy systems and addressing global energy and environmental challenges.

20 September 2022 in Environmental Technology
Verified
Journal Article
Closed access
GAGamil A. A. Al-Hazmi
Gamil A. A. Al-Hazmi
AEAdel El-Zahhar
Adel El-Zahhar
MEM. G. EL-Desouky
M. G. EL-Desouky
MEMohamed A. El-Bindary
Mohamed A. El-Bindary
AEAshraf A. El-Bindary
Ashraf A. El-Bindary
Due to inadequate pharmaceutical wastewater treatment, anticancer contaminants from the pharmaceutical industry frequently end up in the aquatic environment where they endanger aquatic life and humans. As a result, the appropriate treatment of wastewater that contains anticancer agents is crucial for pollution prevention. The purpose of this work is to assess the effectiveness of a Fe3O4@ZIF-8 nanocomposite as an adsorbent to remove of the chemotherapeutic drugs doxorubicin (DOX) from aqueous solution. SEM, XRD, BET, FT-IR, Zeta potential, and point of zero charge analysis were used to study the surface and structural characteristics of the Fe3O4@ZIF-8 nanocomposite. Via the proposed treatment, 804.84 mg/g elimination was successful under the following circumstances: pH = 6; Fe3O4@ZIF-8 dose = 0.02 g/25 mL; DOX concentration = 1.22X10–3 mol; adsorption time = 100 min; and shaking speed = 200 rpm. A investigation of isotherms shown that the Langmuir equation and experimental data suited each other quite well. The adsorption of DOX on Fe3O4@ZIF-8 was endothermic and spontaneous, in accordance with thermodynamic properties. Furthermore, the elimination of DOX was enhanced by the rise in solution temperature. The kinetic analysis revealed that The pseudo-second order was fitted by the model. The suggested adsorption method could recycle Fe3O4@ZIF-8 nanocomposite six times, with a modest reduction in its ability for adsorption. The Fe3O4@ZIF-8 nanocomposite peak broadening was assessed using the Williamson-Hall (W-H) method and the size-strain method, which measure the size of crystallites and strain. For all XRD reflection peaks, physical characteristics including strain rates were computed and the dislocation of was 4.7 × 10–6. Investigate the activity of the DOX towards COVID-19, breast and prostate cancer using molecular docking. GRAPHICAL ABSTRACT

3 May 2021 in Toxin Reviews
Verified
Journal Article
Closed access
TSTaher Sahlabji
Taher Sahlabji
MEMohamed A. El-Nemr
Mohamed A. El-Nemr
ANAhmed El Nemr
Ahmed El Nemr
SRSafaa Ragab
Safaa Ragab
MAMajed M. Alghamdi
Majed M. Alghamdi
TSTarek O. Said
Tarek O. Said
This study demonstrates the use of an ecofriendly activated carbon (AC) prepared from pea peels by chemical activation with zinc chloride for the biosorption of Cr (VI) from aqueous solutions. The prepared AC was characterized by Fourier transform infrared spectrometry (FTIR), scanning electron microscopy (SEM) and Brunauer–Emmett–Teller analyzer (BET). Characterization of AC confirmed the presence of majorly carbonyl and hydroxyl groups, which constitute important adsorption centers. The results declared that prepared AC is designed to be a very good adsorbent for efficient removal of Cr (VI). The maximum adsorption capacity was 480.05 mg/g at an initial Cr (VI) concentration of 400 mg/L.

1 October 2020 in Toxin Reviews
Verified
Journal Article
Closed access
Mohamed A. HassaanMohamed A. Hassaan
Mohamed A. Hassaan
ANAhmed El Namr
Ahmed El Namr
AEAdel El-Zahhar
Adel El-Zahhar
Abubakr M. IdrisAbubakr M. Idris
Abubakr M. Idris
MAMajed M. Alghamdi
Majed M. Alghamdi
TSTarek O. Said
Tarek O. Said
Textile and dye industries have discharged various kinds of toxic residual dyes particularly azo dyes into the environment. In addition to its resistance to biological degradation, Direct Red 23 (DR-23) azo dye is considered toxic, carcinogenic, teratogenic, and mutagenic to the ecosystem. The aim of this study was to investigate the efficiency of different advanced oxidation processes (AOPs) for DR-23 dye detoxification. Single and combined patterns of AOPs, namely ozonation (O3), O3/ultraviolet (UV), O3/UV/hydrogen peroxide (H2O2), and O3/ultrasonic (US), were applied. The effect of pH (3–11) and initial dye concentration (100-500 mg/L), with implication of UV, H2O2, and US, on dye removal efficiency were studied. Decolorization efficiency was found considerably depends on the initial dye concentration and the pH of the solution. The maximum decolorization was obtained at pH 9. The color removal efficiency reached 100% for 100 mg/L DR-23 dye at 15 min using both O3 and O3/UV processes. The half-life of O3, O3/UV, O3/UV/H2O2, and O3/US were found to be 12.4, 9.0, 15.8, and 10.5 min, respectively. The kinetic of AOPs for DR-23 dye removal followed the pseudo-first-order. For example, the rate constant (kobs) of 400 mg/L dye increased to about 38% using O3/UV as compared to O3 alone. Furthermore, LC-(ESI)-MS/MS analysis of the treated DR-23 dye solution was performed to study the final degradation products. It was shown that a DR-23 dye radical underwent partial and complete decomposition of the dye ring to form final products, namely oxalic acid and formic acid.

9 March 2020 in Toxin Reviews
Verified
Journal Article
Closed access
Mohamed A. HassaanMohamed A. Hassaan
Mohamed A. Hassaan
ANAhmed El Namr
Ahmed El Namr
FMFedekar Madkour
Fedekar Madkour
Abubakr M. IdrisAbubakr M. Idris
Abubakr M. Idris
TSTarek O. Said
Tarek O. Said
AEAdel El-Zahhar
Adel El-Zahhar
Acid Yellow 11 (AY-11) is a toxicant azo dye discharged into the aquatic environment from textile, leather, food, and paper industries. This manuscript demonstrates the oxidation processes of AY-11 by ozone (O3) and ultraviolet (UV) assisted ozonation for decolorization and detoxification. Parameters affecting the performance of AY-11 decolorization process were optimized. The results revealed that the initial dye concentration and pH were effective parameters controlling the decolorization performance. More than 99% of decolorization was obtained within the first 20 min of the ozonation process at 100 µg/mL AY-11 dye and pH 9. The decolorization of AY-11 by O3/UV was slightly less efficient than the individual use of O3 in terms of chemical oxygen demand and color removal. Kinetics analysis indicated that AY-11 dye decolorization followed the pseudo-second order. The final degradation products of AY-11 dye in wastewater were identified using GC-MS. The AY-11 dye degradation intermediates were identified using LC-ESI-MS/MS. The toxicity test on the zooplankton of the treated aqueous solution indicated that the O3 and O3/UV treatments reduced the toxicity effect.