Due to the lack of a theoretical basis for multi-field coupling in many system-level models, a novel set of system-level basic equations for flow/heat transfer/combustion coupling is put forward. Then a finite volume model of quasi-1D transient flow field for multi-species compressible variable-cross-section pipe flow is established by discretising the basic equations on spatially staggered grids. Combining with the 2D axisymmetric model for pipe-wall temperature field and specific chemical reaction mechanisms, a finite volume model system is established; a set of specific calculation methods suitable for multi-field coupling system-level research is structured for various parameters in this model; specific modularisation simulation models can be further derived in accordance with specific structures of various typical components in a liquid propulsion system. This novel system can also be used to derive two sub-systems: a flow/heat transfer two-field coupling pipe-flow model system without chemical reaction and species diffusion; and a chemical equilibrium thermodynamic calculation-based multi-field coupling system. The applicability and accuracy of two sub-systems have been verified through a series of dynamic modelling and simulations in earlier studies. The validity of this system is verified in an air–hydrogen combustion sample system. The basic equations and the model system provide a unified universal theory and numerical system for modelling and simulation and even virtual testing of various pipeline systems.
17 October 2016 in SAE International Journal of Advances and Current Practices in Mobility
In recent years, more attention has been focused on environment pollution and energy source issues. As a result, increasingly stringent fuel consumption and emission legislations have been implemented all over the world. For automakers, enhancing engine’s efficiency as a must contributes to lower vehicle fuel consumption. To reach this goal, Geely auto started the development of a 3-cylinder 1.0L turbocharged direct injection (TGDI) gasoline engine to achieve a challenging fuel economy target while maintaining fun-to-drive and NVH performance.Demanding development targets for performance (specific torque 205Nm/L and specific power 100kW/L) and excellent part-load BSFC were defined, which lead to a major challenge for the design of the combustion system. Considering air/fuel mixture, fuel wall impingement and even future potential for lean burn combustion, a symmetrical layout and a central position for the injector with 200bar injection pressure was determined. For the injector, several spray pattern proposals were investigated using CFD. The top-3 best ones were extensively tested on engine dyno, taking injector aging into account. Comparing pre-ignition events, oil dilution, combustion stability and especially particulate number (PN) emission, a 5-hole injector was finally selected. Dual cam phasers were introduced to optimize intake and exhaust valve timing to reduce pumping losses and consequently improve fuel economy. To ensure performance output and responsiveness, an efficient but with very low inertia turbocharger was well mated.As a result, thanks to superior combustion system design and low friction optimization, excellent fuel economy was realized. For instance, BSFC at 2000rpm/2bar BMEP was only around 360g/kWh, which represents new benchmark in the database. Compared to the predecessor a 1.3L TC PFI engine, 13.7% fuel consumption reduction was achieved in the NEDC cycle.