Salvatore Caltabellotta

Dr. Salvatore Caltabellotta

Università degli studi di Palermo - Dipartimento di Ingegneria
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 October 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
EPEmiliano Pipitone
Emiliano Pipitone
Salvatore CaltabellottaSalvatore Caltabellotta
Salvatore Caltabellotta
Leonardo OcchipintiLeonardo Occhipinti
Leonardo Occhipinti
Global warming (GW) and urban pollution focused a great interest on hybrid electric vehicles (HEVs) and battery electric vehicles (BEVs) as cleaner alternatives to traditional internal combustion engine vehicles (ICEVs). The environmental impact related to the use of both ICEV and HEV mainly depends on the fossil fuel used by the thermal engines, while, in the case of the BEV, depends on the energy sources employed to produce electricity. Moreover, the production phase of each vehicle may also have a relevant environmental impact, due to the manufacturing processes and the materials employed. Starting from these considerations, the authors carried out a fair comparison of the environmental impact generated by three different vehicles characterized by different propulsion technology, i.e., an ICEV, an HEV, and a BEV, following the life cycle analysis methodology, i.e., taking into account five different environmental impact categories generated during all phases of the entire life of the vehicles, from raw material collection and parts production, to vehicle assembly and on-road use, finishing hence with the disposal phase. An extensive scenario analysis was also performed considering different electricity mixes and vehicle lifetime mileages. The results of this study confirmed the importance of the life cycle approach for the correct determination of the real impact related to the use of passenger cars and showed that the GW impact of a BEV during its entire life amounts to roughly 60% of an equivalent ICEV, while acidifying emissions and particulate matter were doubled. The HEV confirmed an excellent alternative to ICEV, showing good compromise between GW impact (85% with respect to the ICEV), terrestrial acidification, and particulate formation (similar to the ICEV). In regard to the mineral source deployment, a serious concern derives from the lithium-ion battery production for BEV. The results of the scenario analysis highlight how the environmental impact of a BEV may be altered by the lifetime mileage of the vehicle, and how the carbon footprint of the electricity used may nullify the ecological advantage of the BEV.

1 March 2023 in Energies
Verified
Journal Article
Open access
PDF file
SBStefano Beccari
Stefano Beccari
EPEmiliano Pipitone
Emiliano Pipitone
Salvatore CaltabellottaSalvatore Caltabellotta
Salvatore Caltabellotta
Green hydrogen, produced using renewable energy, is nowadays one of the most promising alternatives to fossil fuels for reducing pollutant emissions and in turn global warming. In particular, the use of hydrogen as fuel for internal combustion engines has been widely analyzed over the past few years. In this paper, the authors show the results of some experimental tests performed on a hydrogen-fueled CFR (Cooperative Fuel Research) engine, with particular reference to the combustion. Both the air/fuel (A/F) ratio and the engine compression ratio (CR) were varied in order to evaluate the influence of the two parameters on the combustion process. The combustion duration was divided in two parts: the flame front development (characterized by laminar flame speed) and the rapid combustion phase (characterized by turbulent flame speed). The results of the hydrogen-fueled engine have been compared with results obtained with gasoline in a reference operating condition. The increase in engine CR reduces the combustion duration whereas the opposite effect is observed with an increase in the A/F ratio. It is interesting to observe how the two parameters, CR and A/F ratio, have a different influence on the laminar and turbulent combustion phases. The influence of both A/F ratio and engine CR on heat transfer to the combustion chamber wall was also evaluated and compared with the gasoline operation. The heat transfer resulting from hydrogen combustion was found to be higher than the heat transfer resulting from gasoline combustion, and this is probably due to the different quenching distance of the two fuels.

15 December 2021 in Energies
Verified
Journal Article
Open access
PDF file
EPEmiliano Pipitone
Emiliano Pipitone
Salvatore CaltabellottaSalvatore Caltabellotta
Salvatore Caltabellotta
As is widely known, internal combustion engines are not able to complete the expansion process of the gas inside the cylinder, causing theoretical energy losses in the order of 20%. Several systems and methods have been proposed and implemented to recover the unexpanded gas energy, such as turbocharging, which partially exploits this energy to compress the fresh intake charge, or turbo-mechanical and turbo-electrical compounding, where the amount of unexpanded gas energy not used by the compressor is dedicated to propulsion or is transformed into electric energy. In all of these cases, however, maximum efficiency improvements between 4% and 9% have been achieved. In this work, the authors deal with an alternative propulsion system composed of a CNG-fueled spark ignition engine equipped with a turbine-generator specifically dedicated to unexpanded exhaust gas energy recovery and with a separated electrically driven turbocompressor. The system was conceived specifically for hybrid propulsion architectures, with the electric energy produced by the turbine generator being easily storable in the on-board energy storage system and re-usable for vehicle traction. The proposed separated electric turbo-compound system has not been studied in the scientific literature, nor have its benefits ever been analyzed. In this paper, the performances of the analyzed turbo-compound system are evaluated and compared with a traditional reference turbocharged engine from a hybrid application perspective. It is demonstrated that separated electric compounding has great potential, with promising overall efficiency advantages: fuel consumption reductions of up to 15% are estimated for the same power output level.

16 February 2022 in Journal of Engineering for Gas Turbines and Power
Verified
Journal Article
Closed access
PDF file
EPEmiliano Pipitone
Emiliano Pipitone
Salvatore CaltabellottaSalvatore Caltabellotta
Salvatore Caltabellotta
In-cylinder expansion of internal combustion engines based on Diesel or Otto cycles cannot be completely brought down to ambient pressure, causing a 20% theoretical energy loss. Several systems have been implemented to recover and use this energy such as turbocharging, turbomechanical and turbo-electrical compounding, or the implementation of Miller cycles. In all these cases however, the amount of energy recovered is limited allowing the engine to reach an overall efficiency incremental improvement between 4% and 9%. Implementing an adequately designed expander–generator unit could efficiently recover the unexpanded exhaust gas energy and improve efficiency. In this work, the application of the expander–generator unit to a hybrid propulsion vehicle is considered, where the onboard energy storage receives power produced by an expander–generator, which could hence be employed for vehicle propulsion through an electric drivetrain. Starting from these considerations, a simple but effective modeling approach is used to evaluate the energetic potential of a spark-ignition (SI) engine electrically supercharged and equipped with an exhaust gas expander connected to an electric generator. The overall efficiency was compared to a reference turbocharged engine within a hybrid vehicle architecture. It was found that, if adequately recovered, the unexpanded gas energy could reduce engine fuel consumption and related pollutant emissions by 4–12%, depending on overall power output.

25 February 2023 in Energies
Verified
Journal Article
Open access
PDF file
EPEmiliano Pipitone
Emiliano Pipitone
Salvatore CaltabellottaSalvatore Caltabellotta
Salvatore Caltabellotta
Antonino SferlazzaAntonino Sferlazza
Antonino Sferlazza
Maurizio CirrincioneMaurizio Cirrincione
Maurizio Cirrincione
The efficiency of hybrid electric vehicles may be substantially increased if the energy of exhaust gases, which do not complete the expansion inside the cylinder of the internal combustion engine, is efficiently recovered using a properly designed turbo-generator and employed for vehicle propulsion. Previous studies, carried out by the same authors of this work, showed a potential hybrid vehicle fuel efficiency increment up to 15% employing a 20 kW turbine on a 100 HP-rated power thermal unit. The innovative thermal unit proposed here is composed of a supercharged engine endowed with a properly designed turbo-generator, which comprises two fundamental elements: an exhaust gas turbine expressly designed and optimized for the application, and a suitable electric generator necessary to convert the recovered energy into electric energy, which can be stored in the on-board energy storage system of the vehicle. In this two-part work, the realistic efficiency of the innovative thermal unit for hybrid vehicles is evaluated and compared to a traditional turbocharged engine. In Part 1, the authors presented a model for the prediction of the efficiency of a dedicated radial turbine, based on a simple but effective mean-line approach; the same paper also reports a design algorithm, which, thanks to some assumptions and approximations, allows fast determination of the right turbine geometry for a given design operating condition. It is worth pointing out that, being optimized for quasi-steady power production, the exhaust gas turbine here considered is quite different from the ones commonly employed for turbocharging applications; for this reason, and in consideration of the required power size, such a turbine is not available on the market, nor has its development been previously carried out in the scientific literature. In this paper, Part 2, a radial turbine geometry is defined for the thermal unit previously calculated, employing the design algorithm described in Part 1; the realistic energetic advantages that could be achieved by the implementation of the turbo-generator on a hybrid propulsion system are evaluated through the performance prediction model under different operating conditions of the thermal unit. As an overall result, it was estimated that, compared to a reference traditional turbocharged engine, the turbo-compound system could gain vehicle efficiency improvement between 3.1% and 17.9%, according to the output power delivered, with an average efficiency increment of 10.9% evaluated on the whole operating range.

17 January 2023 in Energies
Verified
Journal Article
Open access
PDF file
EPEmiliano Pipitone
Emiliano Pipitone
Salvatore CaltabellottaSalvatore Caltabellotta
Salvatore Caltabellotta
Antonino SferlazzaAntonino Sferlazza
Antonino Sferlazza
Maurizio CirrincioneMaurizio Cirrincione
Maurizio Cirrincione
The efficiency of Hybrid Electric Vehicles (HEVs) may be substantially increased if the energy of the exhaust gases, which do not complete the expansion inside the cylinder of the internal combustion engine, is efficiently recovered by means of a properly designed turbogenerator and employed for vehicle propulsion; previous studies, carried out by the same authors of this work, showed a potential hybrid vehicle fuel efficiency increment up to 15% by employing a 20 kW turbine on a 100 HP rated power thermal unit. The innovative thermal unit here proposed is composed of a supercharged engine endowed with a properly designed turbogenerator, which comprises two fundamental elements: an exhaust gas turbine expressly designed and optimized for the application, and a suitable electric generator necessary to convert the recovered energy into electric energy, which can be stored in the on-board energy storage system of the vehicle. In these two parts, the realistic efficiency of the innovative thermal unit for hybrid vehicle is evaluated and compared to a traditional turbocharged engine. In Part 1, the authors present a model for the prediction of the efficiency of a dedicated radial turbine, based on a simple but effective mean-line approach; the same paper also reports a design algorithm, which, owing to some assumptions and approximations, allows a fast determination of the proper turbine geometry for a given design operating condition. It is worth pointing out that, being optimized for quasi-steady power production, the exhaust gas turbine considered is quite different from the ones commonly employed for turbocharging application; for this reason, and in consideration of the required power size, such a turbine is not available on the market, nor has its development been previously carried out in the scientific literature. In the Part 2 paper, a radial turbine geometry is defined for the thermal unit previously calculated, employing the design algorithm described in Part 1; the realistic energetic advantage that could be achieved by the implementation of the turbogenerator on a hybrid propulsion system is evaluated through the performance prediction model under the different operating conditions of the thermal unit. As an overall result, it was estimated that, compared to a reference traditional turbocharged engine, the turbocompound system could gain vehicle efficiency improvement between 3.1% and 17.9%, depending on the output power level, while an average efficiency increment of 10.9% was determined for the whole operating range.