Three acrylic-based superabsorbents—TerraHydrogel^®Aqua (THA), Zeba^®Hydrogel (ZH) and Agro^®Hydrogel (AH) were used to investigate the influence of chemical conditions on kinetic and adsorption behavior towards metal ions in the presence of a chelating agent of a new generation called ethylenediamine-N,N′-disuccinic acid (EDDS). The effects of relevant parameters—mainly including those of sorbent dose, pH of the solution and initial concentration of Cu(II), Zn(II), Mn(II) and Fe(III) complexes with EDDS as well as phase contact time and temperature—on the adsorption efficiency were studied in detail by the static method. The experimental data were also characterized by kinetic and adsorption parameters obtained based on the Langmuir and Freundlich models of sorption as well as the Lagergren, Ho and McKay and Weber–Morris models.

The superabsorbents’ application as materials for the preparation of modern mineral fertilizers of controlled activity is presented. Under the static conditions, the commercial acrylic-based Agro^® Hydrogel was used as a sorbent for Cu(II), Fe(III), Mn(II), and Zn(II) ions in the presence of three biodegradable complexing agents of the new generation: (N-1,2-dicarboxyethyl)-D,L-aspartate acid (IDHA), N,N-ethylenediaminedisuccinic acid (EDDS) and N,N-bis(carboxymethyl) glutamic acid (GLDA). The ions and complexes concentrations were determined by the inductively coupled plasma optical emission spectrometer (ICP-OES). The characterization of hydrogel before and after the adsorption process was made using the Fourier transform infrared spectroscopy (FT-IR), surface area determination (ASAP), scanning electron microscopy (SEM-EDS) as well as the thermogravimetric (TGA) methods. The influence of the phase contact time, initial concentration, and pH on the adsorption capacities was investigated. The kinetic and adsorption parameters were determined. The Langmuir, Freundlich, Dubinin–Radushkevich, and Temkin adsorption models were applied to describe the experimental data. The Langmuir isotherm model accurately characterized the equilibrium process. The adsorption process was fast, and it reached equilibrium after 60 min of the phase contact time. The research on the adsorption of Cu(II), Fe(III), Mn(II), and Zn(II) onto Agro^® Hydrogel with IDHA, EDDS, and GLDA indicates that these complexing agents improve process efficiency.

Newly synthesized cerium oxide was successfully obtained by the hard templating route. The optimal As(III) and As(V) adsorption onto the studied adsorbent was reached for the initial pH of 4.0 and a contact time of 10 h. The highest static adsorption capacities for As(III) and As(V) were 92 mg g⁻¹ and 66 mg g⁻¹, respectively. The pseudo-second-order model was well fitted to the As(III) and As(V) experimental kinetics data. The Langmuir model described the As(III) and As(V) adsorption isotherms on synthesized material. The adsorption mechanism of the studied ions onto the synthesized cerium oxide was complex and should be further investigated. The optimal solid–liquid ratio during the proposed aqueous extraction of inorganic As from the Fucus vesiculosus algae was 1:50. The optimal dosage of the synthesized cerium oxide (0.06 g L⁻¹) was successfully applied for the first time for inorganic As removal from the aqueous algal extract.