Pseudo-tetragonal phase boundary existent Ca0.60(Li0.5Bi0.5)0.40Bi2Nb2O9:xwt%MnO2 (CBNL:xMn) ceramic series is fabricated to investigate the ferroelectric and piezoelectric properties. Pure CBNL and CBNL:xMn ceramics have maintained their pseudo-tetragonal phase boundary even after the insertion of Mn ions. The addition of MnO2 in CBNL has improved the multifunctional properties of material at x = 0.20. CBNL:0.20Mn has shown the relative density of 98%, saturated polarisation (PS) of ~ 13.5 µC/cm2, high piezoelectric coefficient (d33) of ~ 25 pC/N, and high impedance of ~ 8.9 × 108 Ω at room temperature, which are the much improved values as compared to pure CBN or CBNL ceramics. The dielectric constant (ɛr) dependence on temperature is presenting the sharp peak of CBNL:0.20Mn ceramic at Curie temperature (TC) ~ 918°C confirming the strong ferroelectric nature of the ceramic. Importantly, poled CBNL:0.20Mn ceramic has shown the thermally stable depoling performance, which remains 92% (23 pC/N) of its initial room temperature value even after annealing the sample at 800°C. Results indicate the clear significance that the introduction of multivalence Mn ions in the pseudo-tetragonal existent region of CBNL has improved the multifunctional properties of the material, making it a strong candidate to be utilised in actuators and high-temperature piezoelectric devices.
15 February 2022 in Journal of Materials Science: Materials in Electronics
To satisfy the ever-increasing energy demands, it is of the utmost importance to develop electrochemical materials capable of producing and storing energy in a highly efficient manner. Titanium dioxide (TiO2) has recently emerged as a promising choice in this field due to its non-toxicity, low cost, and eco-friendliness, in addition to its porosity, large surface area, good mechanical strength, and remarkable transport properties. Here, we present titanium dioxide nanoplates/polyvinylidene fluoride (TiO2/PVDF) membranes prepared by a straightforward hydrothermal strategy and vacuum filtration process. The as-synthesized TiO2/PVDF membrane was applied for energy storage applications. The fabricated TiO2/PVDF membrane served as the negative electrode for supercapacitors (SCs). The electrochemical properties of a TiO2/PVDF membrane were explored in an aqueous 6 M KOH electrolyte that exhibited good energy storage performance. Precisely, the TiO2/PVDF membrane delivered a high specific capacitance of 283.74 F/g at 1 A/g and maintained capacitance retention of 91% after 8000 cycles. Thanks to the synergistic effect of TiO2 and PVDF, the TiO2/PVDF membrane provided superior electrochemical performance as an electrode for a supercapacitor. These superior properties will likely be used in next-generation energy storage technologies.