Using corn starch (CS) and κ-carrageenan(κC) as the raw material and active composite, respectively, films containing different concentrations of ethanol extract of onion skin were prepared. The effects of different concentrations of ethanol extract of onion skin (EEOS) on the physicochemical properties, as well as the antioxidant and antibacterial properties, of CS/κC films were also discussed. The addition of ethanol extract of onion skin inhibited the recrystallization of starch molecules in the composite films. It affected the microstructure of the composite films. The color of the composite films was deepened, the brightness was reduced, and the opacity was increased. Water vapor permeability increased, tensile strength decreased, and elongation at the break increased. The glass-transition temperature decreased. The clearance of DPPH radicals and ABTS cation radicals increased. Moreover, when the concentration of EEOS was 3%, the antioxidant effect of the films on oil was greatly improved and could effectively inhibit Staphylococcus aureus and Escherichia coli. The above results showed that adding ethanol extract of onion skin improved the physicochemical properties and biological activities of the CS/κC composite films, so CS/κC/EEOS composite films can be used as an active packaging material to extend food shelf-life. These results can provide a theoretical basis for the production and application of corn starch/κ-carrageenan/ethanol extract of onion skin composite films.

An active film composed of corn starch/κ-carrageenan and ethanolic grape seed extract (0, 1, 3, and 5 wt% of GSE on corn starch basis) were successfully prepared using the solvent casting technique. The effects of the different concentrations of ethanolic grape seed extract (GSE) on the physicochemical properties, antioxidant properties, and antibacterial properties of CS/κC films were analyzed. The results showed that the addition of GSE inhibited the recrystallization of starch in the composite film. The glass transition temperature of composite film is 121.65 °C. With the addition of GSE, the surface roughness of the composite film increased, and the cross-section displayed a stratification phenomenon. Meanwhile, when GSE was added to the composite film, the tensile strength of the composite film decreased (3.50 ± 0.27 MPa), the elongation at break increased (36.87 ± 2.08%), and the WVP increased (1.58 ± 0.03 g mm/m²·d· kPa). With the increase of the concentration of GSE in the composite film, the a* value and b* value of the composite film increase, the L* value decreases, and the opacity increases. The lipid oxidation test proved that the composite films containing 1% GSE has a significant inhibitory effect on the oxidation of lard (p < 0.05). The above results indicate that the GSE can be used as a food-grade packaging material and has a good application prospect in the food industry.

The effects of hot air temperature and slice thickness on the drying kinetics and quality of Hami melon slices (HMS) were studied. HMS (3 mm and 5 mm) were carried out in a forced convection drying oven at temperatures ranging from 60 ~ 90 °C. The increase in hot air temperature and the decrease in slice thickness led to shorter drying times and higher drying rates. The drying rate curves indicated that the drying process of HMS did not exhibit a constant drying rate period. In the drying kinetics modeling process, the Explinear model was suited for describing the drying curves with higher accuracy. According to Fick’s second law, the moisture effective diffusion coefficient of 3 mm and 5 mm HMS ranged from 4.72 ~ 15.96 × 10^-11m²/s at temperatures of 60, 70, 80, and 90 °C. When the thickness of HMS were 3 mm and 5 mm, the activation energies were 30.13 and 43.75 kJ/mol, respectively. When dried at low temperatures, the color of HMS was closer to fresh Hami melon. With the increase of hot air temperature, the hardness of HMS decreases and the rehydration increases. When the thickness of the HMS decreases, the hardness of the slices decreases and the rehydration increases.

Developing pH-sensitive materials for real-time freshness monitoring is critical for ensuring seafood safety. In this study, pH-responsive indicator films were prepared by incorporating purple cabbage anthocyanin (PCA) into a κ-carrageenan/carboxymethyl cellulose (CA/CMC) matrix via solution casting, with PCA concentrations of 2.5%, 5.0%, 7.5%, and 10% (w/w). The films exhibited remarkable pH sensitivity, with distinct color changes across pH 2.0–11.0. Incorporating PCA enhanced film crystallinity, antioxidant properties, and opacity while reducing water vapor transmission (WVP). High PCA content resulted in rougher morphology, lowering tensile strength (TS) but improving elongation at break (EB). The indicator film had good environmental stability, and the color difference was not visible after 10 days in the dark and 4 °C conditions. The CA/CMC/PCA-10% film showed the most pronounced pH-responsive color changes, transitioning from purple to green as hairtail freshness deteriorated. This innovative approach highlights the potential of CA/CMC/PCA films as reliable, eco-friendly indicators for real-time seafood freshness monitoring, offering significant advancements in smart packaging technology.