Process equipment and plant maintenance problems are complex in the oil refinery business, since effective maintenance needs to ensure the reliability and availability of the plant. Failure Mode and Effects Analysis (FMEA) is a risk assessment tool that aims to determine possible failure modes, and to reduce the ratio of unknown failure modes, by identifying business-critical systems and the risks of their failures. For the identified failure modes, FMEA determines risk mitigation action(s). The goal is to prevent failure and keep assets and plants running at peak performance by providing fully integrated operations, maintenance, turnarounds, modifications, and asset integrity solutions, during all phases of the asset life cycle. This research was based on FMEA use/application in refineries’ units, and proposes the new fuzzy FMEA risk quantification approach method: “four fuzzy logic system”. The model included a pre-assessment, by sets of fuzzy logic systems, that examined the input parameters that affected the variables of severity, occurrence, and detectability. The proposed model prioritized risks better and addressed the drawbacks of the conventional FMEA method.

The reliable operation of a process plant is critical to the safety, performance, and profitability of a business. Failure Mode and Effects Analysis (FMEA) is a process of reviewing systems, subsystems, and equipment that identify potential failure modes, their root causes, and consequences. FMEA is also a risk assessment tool that has been used successfully in a wide range of process industries as an integral part of reliability-centered maintenance, safety management, and continuous improvement. The method has indeed been criticized, especially in the area of system assessment, but engineers still predominantly use traditional, unmodified FMEA best practices. In this study, a new conceptual model is proposed to improve the traditional technique and make FMEA a more autonomous, data-driven, and accurate method. The conceptual model of improved FMEA uses ANFIS and FIS models in one automated process that aims to solve the defect handling process from failure detection to quantification of risk level and prioritization of dedicated mitigation action.