This study presents an investigation of the cyclic freeze–thaw (F/T) effects on the dynamic and static splitting-tensile properties of plain cemented clay (clay mixed with 15% cement) and basalt fiber–reinforced (BFR) cemented clay (clay mixed with 1.5% basalt fiber and 15% cement). The effects were evaluated by focusing on the dynamic tensile strength, static tensile strength, absorbed energy, and strain rate effects of two different cemented clays at 0, 1, 3, 6, 9, and 12 F/T cycles using a static splitting-tensile test and splitting Hopkinson pressure bar (SHPB) test. The experimental results showed that the basalt fiber addition led to a marked increase in the static and dynamic tensile strength of the cemented clay specimen under F/T cycles. In the static splitting-tensile test, the strength decreased with the increase of the number of F/T cycles for the two specimens except 12 F/T cycles. All of the plain cemented clay’s dynamic tensile strength had a sharp decline at one F/T cycle in the SHPB test, while the decrease in the strength at three F/T cycles was larger (more than 50%) for that BFR cemented clay. The law related to absorbed energy was similar to dynamic tensile strength, and the relationship between the two was obtained. Continuous freeze–thaw cycles do not necessarily decrease the tensile strength of cemented clay, and its detailed mechanism was discussed.
1 January 2020 in Advances in Materials Science and Engineering
The climate in the aeolian desert has great differences from that in other regions, generally showing large diurnal temperature differences and extremely dry and low groundwater level characteristics. Therefore, the physical and mechanical characteristics of the sand are different from those of other regions, and it has a loose soil structure, large pores, and a low bearing capacity. To ensure the security and applicability of engineering, it is necessary to study the engineering characteristics of aeolian sand. This paper focuses on the bearing capacity parameters of aeolian sand in the Mu Us Desert, and test sites in 6 weak foundation areas are selected. Large numbers of basic soil mechanical parameters have been collected through in situ static load tests (SLT) and laboratory confined compaction tests (CCT) to evaluate the effect of foundation treatments. The results show that the characteristics of aeolian sand in the Mu Us Desert include low moisture, poor cohesion, and easy compaction. The mud and water content affect the bearing capacity of aeolian sand. For weak foundations, adding a geogrid or replacing a weak soil layer with stone and aeolian sand can significantly improve the bearing capacity.
The exposure of rebar in diaphragm wall was discovered after excavation in more than 20 subway stations, along the lines 1 to 4 in Suzhou, China. Such phenomena were investigated from strata formation, hydrogeological condition, construction techniques, adjacent surcharge load and other aspects. Based on field investigation, in situ testing and numerical simulation, the disturbance of trenching operations and the main factors that affect the stability of the diaphragm wall during the trenching process are analyzed comprehensively. The results show that the deformation behavior and stability of slurry trench walls are mainly influenced by strata characteristics, adjacent surcharge loading, formation of bentonite filter cake on trench walls, pressure of a confined aquifer, height of slurry filling and slurry density. The underground water pressure in the confined aquifer of silty soil layers is considered as one of the main controlling factors, which is verified by the subsequently dewatering and trenching tests. During the construction process, the deformation and stability of the trench walls can be improved by adjusting and controlling the crucial controlling factors. Further, relevant remedial measures as well as the preventive methods during the process of constructing diaphragm walls and subsequent soil excavation are addressed.
13 April 2024 in Journal of Civil Structural Health Monitoring