Misalignment between the instantaneous center of rotation (ICR) of human joint and the ICR of wearable robotic exoskeleton widely exists among most of exoskeletons widely used in rehabilitation, which results in discomfort, even endangers human safety. In order to alleviate it, this study focuses on the solution of misalignment in knee joint of lower limb exoskeletons, and proposes a compliant five-bar parallel mechanism, which offers two mobility in sagittal plane, as well as the torsional springs mounted on this mechanism, have the potential to automatically adjust the ICR of output link connected to thigh with respect to the basis link connected to shank. To reach this goal, we build the stiffness model of the mechanism and optimize its variables. And the self-alignment of the compliant five-bar parallel mechanism is verified via experimental investigations.
As a conventional mobile assistance device, a wheelchair makes people suffer from skin injuries such as bed sores and ulcer, owing to sitting on a wheelchair for a long period. And the wheelchair is barely able to adapt to complex terrains, such as stairs. With the development of robotic technology, the rise of lower-limb exoskeleton robotics provides a new means of motion assistance, and provides training of motor ability. However, it can't support a user to compete long-distance movement because a user need consume much energy to keep balance. Considering the merits and demerits of wheelchairs and exoskeletons, we propose a novel hybrid motion assistant robot that combines both. The biggest challenge is the design of a mechanism that can transform the robot from a wheelchair into an exoskeleton, as well as the reverse transformation. To achieve this goal, the mechanism must be able to achieve three configurations: the wheelchair configuration, the support configuration, and the exoskeleton configuration. To reduce the weight of the robot and make it more compact, the linkages and actuators in the mechanism are designed to be reusable when the configuration changes. The mechanism is designed based on the analysis of functional requirements, and distributed synthesis of the mechanism is adopted. The kinematics and statics of every configuration are discussed in detail, to obtain the most reasonable dimensions using the particle swarm optimization algorithm. The mechanism performance is simulated and verified using ADAMS software. Finally, an experimental prototype is constructed for preliminary tests.
Nonlinear stiffness actuators with coupled stiffness and load can achieve a trade-off between high bandwidth in high-stiffness and high torque resolution in low-stiffness, but numerous researches have focussed on the implementation of novel mechanical actuator structures with nonlinear stiffness rather than on the optimisation of the stiffness values to improve the actuator performances. Designing the optimal stiffness profile to simultaneously achieve increased control bandwidth and torque resolution is a critical problem that needs to be resolved. This study investigates this problem and proposes a quantised comprehensive performance index “PRI” and achieves increased control bandwidth and torque resolution using a common feedback controller. Minimising PRI enables nonlinear stiffness actuators to achieve optimal stiffness profiles. Afterward, an optimal stiffness curve and corresponding feedback control gains are obtained for a load-dependent nonlinear stiffness actuator (LDNSA) based on the proposed methodology. Simulations and experiments based on the LDNSA are conducted at the optimal stiffness to verify the proposed method. Remarkably, the results show that the LDNSA with optimal stiffness yields high comprehensive performance including increased bandwidth in the case of low stiffness and increased torque resolution in the cases of large load.