Chiara Amante

Dr. Chiara Amante

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 October 2021 in Pharmaceutics
Verified
Journal Article
Open access
PDF file
CAChiara Amante
Chiara Amante
Tiziana EspositoTiziana Esposito
Tiziana Esposito
Pasquale Del GaudioPasquale Del Gaudio
Pasquale Del Gaudio
Veronica Di SarnoVeronica Di Sarno
Veronica Di Sarno
Amalia PortaAmalia Porta
Amalia Porta
RARita P. Aquino
Rita P. Aquino
In this paper, alginate/pectin and alginate/pectin/chitosan blend particles, in the form of an in situ forming hydrogel, intended for wound repair applications, have been successfully developed. Particles have been used to encapsulate doxycycline in order to control the delivery of the drug, enhance its antimicrobial properties, and the ability to inhibit host matrix metalloproteinases. The presence of chitosan in the particles strongly influenced their size, morphology, and fluid uptake properties, as well as drug encapsulation efficiency and release, due to both chemical interactions between the polymers in the blend and interactions with the drug demonstrated by FTIR studies. In vitro antimicrobial studies highlighted an increase in antibacterial activity related to the chitosan amount in the powders. Moreover, in situ gelling powders are able to induce a higher release of IL-8 from the human keratinocytes that could stimulate the wound healing process in difficult-healing. Interestingly, doxycycline-loaded particles are able to increase drug activity against MMPs, with good activity against MMP-9 even at 0.5 μg/mL over 72 h. Such results suggest that such powders rich in chitosan could be a promising dressing for exudating wounds.

30 April 2025 in International Journal of Pharmaceutics
Verified
Journal Article
Open access
CSChiara De Soricellis
Chiara De Soricellis
CLChloé Laigle
Chloé Laigle
LSLucio Spinelli
Lucio Spinelli
Maria Chiara MontiMaria Chiara Monti
Maria Chiara Monti
CAChiara Amante
Chiara Amante
Pasquale Del GaudioPasquale Del Gaudio
Pasquale Del Gaudio
Antimicrobial peptides (AMPs) such as LL37 offer a promising alternative to conventional antibiotics in treating chronic and multidrug-resistant wound infections. However, their clinical translation is limited by rapid degradation and cytotoxicity at high concentrations. This study investigates the encapsulation of a palmitoylated LL37 in a FDA-approved poly(lactic-co-glycolic acid) (PLGA) nanoparticles using two fabrication techniques, nanoprecipitation and microfluidics, to enhance stability and controlled peptide release. Microfluidic-generated nanoparticles demonstrated superior size uniformity, smaller hydrodynamic size (102.3 ± 2.0 nm vs 189.3 ± 3.4 nm), improved stability, and prolonged LL37(P) release compared to nanoparticles obtained via bulk nanoprecipitation method. LL37-encapsulated nanoparticles demonstrated controlled peptide release, enhanced keratinocyte uptake, and significant fibroblast-mediated wound closure acceleration. Proteomic analysis of the nanoparticle-protein corona revealed enrichment in proteins involved in coagulation, inflammation modulation, and extracellular matrix remodelling, suggesting an active role of nanoparticles in modulating the wound healing microenvironment. These findings highlight PLGA-based LL37 loaded nanocarriers as a promising biopolymer platform for AMP delivery in wound healing applications and as a viable therapeutic strategy in regenerative medicine and infection control.

20 December 2023 in Gels
Verified
Journal Article
Open access
PDF file
CAChiara Amante
Chiara Amante
GFGiovanni Falcone
Giovanni Falcone
RARita P. Aquino
Rita P. Aquino
Paola RussoPaola Russo
Paola Russo
LNLuigi Nicolais
Luigi Nicolais
Pasquale Del GaudioPasquale Del Gaudio
Pasquale Del Gaudio
Chronic skin wounds affect more than 40 million patients worldwide, representing a huge problem for healthcare systems. This study elucidates the optimization of an in situ gelling polymer blend powder for biomedical applications through the use of co-solvents and functional excipients, underlining the possibility of tailoring microparticulate powder properties to generate, in situ, hydrogels with advanced properties that are able to improve wound management and patient well-being. The blend was composed of alginate, pectin, and chitosan (APC). Various co-solvents (ethanol, isopropanol, and acetone), and salt excipients (sodium bicarbonate and ammonium carbonate) were used to modulate the gelation kinetics, rheology, adhesiveness, and water vapor transmission rate of the gels. The use of co-solvents significantly influenced particle size (mean diameter ranging from 2.91 to 5.05 µm), depending on the solvent removal rate. Hydrogels obtained using ethanol were able to absorb over 15 times their weight in simulated wound fluid within just 5 min, whereas when sodium bicarbonate was used, complete gelation was achieved in less than 30 s. Such improvement was related to the internal microporous network typical of the particle matrix obtained with the use of co-solvents, whereas sodium bicarbonate was able to promote the formation of allowed particles. Specific formulations demonstrated an optimal water vapor transmission rate, enhanced viscoelastic properties, gel stiffness, and adhesiveness (7.7 to 9.9 kPa), facilitating an atraumatic removal post-use with minimized risk of unintended removal. Microscopic analysis unveiled that porous inner structures were influencing fluid uptake, gel formation, and transpiration. In summary, this study provided valuable insights for optimizing tailored APC hydrogels as advanced wound dressings for chronic wounds, including vascular ulcers, pressure ulcers, and partial and full-thickness wounds, characterized by a high production of exudate.

17 January 2025 in Pharmaceutics
Verified
Journal Article
Open access
PDF file
CSChiara De Soricellis
Chiara De Soricellis
CAChiara Amante
Chiara Amante
Paola RussoPaola Russo
Paola Russo
RARita P. Aquino
Rita P. Aquino
Pasquale Del GaudioPasquale Del Gaudio
Pasquale Del Gaudio
Background/Objectives: This study investigates for the first time the use of the prilling technique in combination with solvent evaporation to produce nano- and submicrometric PLGA particles to deliver properly an active pharmaceutical ingredient. Curcumin (CCM), a hydrophobic compound classified under BCS (Biopharmaceutics Classification System) class IV, was selected as the model drug. Methods: Key process parameters, including polymer concentration, solvent type, nozzle size, and surfactant levels, were optimized to obtain stable particles with a narrow size distribution determined by DLS analysis. Results: Particles mean diameter (d50) 316 and 452 nm, depending on drug-loaded cargo as Curcumin-loaded PLGA nanoparticles demonstrated high encapsulation efficiency, assessed via HPLC analysis, stability, and controlled release profiles. In vitro studies revealed a faster release for lower drug loadings (90% release in 6 h) compared to sustained release over 7 days for higher-loaded nanoparticles, attributed to polymer degradation and drug-polymer interactions on the surface of the particles, as confirmed by FTIR analyses. Conclusions: These findings underline the potential of this scalable technique for biomedical applications, offering a versatile platform for designing drug delivery systems with tailored release characteristics.

3 August 2022 in Pharmaceutics
Verified
Journal Article
Open access
PDF file
Renata AdamiRenata Adami
Renata Adami
Paola RussoPaola Russo
Paola Russo
CAChiara Amante
Chiara Amante
CSChiara De Soricellis
Chiara De Soricellis
Giovanna Della PortaGiovanna Della Porta
Giovanna Della Porta
Pasquale Del GaudioPasquale Del Gaudio
Pasquale Del Gaudio
Flavonoids are polyphenolic compounds largely present in fruits and vegetables possessing antioxidant properties, anti-inflammatory and antibacterial activities. Their use in clinical practice is very poor due to their low bioavailability, susceptibility to oxidation and degradation. Moreover, their slight solubility in biological fluids and a consequent low dissolution rate leads to an irregular absorption from solid dosage forms, even though, anti-inflammatory formulations could be used as support for several disease treatment, i.e. the COVID-19 syndrome. To improve flavonoid bioavailability particle size of the powder can be reduced to make it breathable and to promote the absorption in the lung tissues. Supercritical fluid based antisolvent technique has been used to produce naringin particles, with size, shape and density as well as free flowing properties able to fit inhalation needs. The dried particles are produced with the removal of the solvent at lower temperatures compared to the most used traditional micronization processes, such as spray drying. The best breathable fraction for naringin particles is obtained for particles with a d50~7 µm manufactured at 35 °C-150 bar and at 60 °C-130 bar, corresponding to 32.6% and 36.7% respectively. The powder is produced using a high CO2 molar fraction (0.99) that assure a better removal of the solvent. NuLi-1 cell line of immortalised bronchial epithelial cells adopted to evaluate powder cytotoxicity indicated after 24 h absence of toxicity at concentration of 25 µM.

16 June 2023 in Gels
Verified
Journal Article
Open access
PDF file
MSMaria Rosaria Sellitto
Maria Rosaria Sellitto
CAChiara Amante
Chiara Amante
RARita P. Aquino
Rita P. Aquino
Paola RussoPaola Russo
Paola Russo
RRRosalía Rodríguez-Dorado
Rosalía Rodríguez-Dorado
Pasquale Del GaudioPasquale Del Gaudio
Pasquale Del Gaudio
The production of aerogels for different applications has been widely known, but the use of polysaccharide-based aerogels for pharmaceutical applications, specifically as drug carriers for wound healing, is being recently explored. The main focus of this work is the production and characterization of drug-loaded aerogel capsules through prilling in tandem with supercritical extraction. In particular, drug-loaded particles were produced by a recently developed inverse gelation method through prilling in a coaxial configuration. Particles were loaded with ketoprofen lysinate, which was used as a model drug. The core-shell particles manufactured by prilling were subjected to a supercritical drying process with CO2 that led to capsules formed by a wide hollow cavity and a tunable thin aerogel layer (40 μm) made of alginate, which presented good textural properties in terms of porosity (89.9% and 95.3%) and a surface area up to 417.0 m2/g. Such properties allowed the hollow aerogel particles to absorb a high amount of wound fluid moving very quickly (less than 30 s) into a conformable hydrogel in the wound cavity, prolonging drug release (till 72 h) due to the in situ formed hydrogel that acted as a barrier to drug diffusion.