Integrated continuous manufacturing processes of active pharmaceutical ingredients (API) provide key benefits concerning product quality control, scale-up capability, and a reduced time-to-market. Thereby, the crystallization step, which is used in approximately 90% of API productions, mainly defines the final API properties. This study focuses on the design and operation of an integrated small-scale process combining a continuous slug flow crystallizer (SFC) with continuous particle isolation using the modular continuous vacuum screw filter (CVSF). By selective adjustment of supersaturation and undersaturation, the otherwise usual blocking could be successfully avoided in both apparatuses. It was shown that, during crystallization in an SFC, a significant crystal growth of particles (Δd50,3 220 µm) is achieved, and that, during product isolation in the CVSF, the overall particle size distribution (PSD) is maintained. The residual moistures for the integrated process ranged around 2% during all experiments performed, ensuring free-flowing particles at the CVSF outlet. In summary, the integrated setup offers unique features, such as its enhanced product quality control and fast start-up behavior, providing a promising concept for integrated continuous primary manufacturing processes of APIs.
The continuous vacuum screw filter (CVSF) for small-scale continuous product isolation of suspensions was operated for the first time with cuboid-shaped and needle-shaped particles. These high aspect ratio particles are very common in pharmaceutical manufacturing processes and provide challenges in filtration, washing, and drying processes. Moreover, the flowability decreases and undesired secondary processes of attrition, breakage, and agglomeration may occur intensively. Nevertheless, in this study, it is shown that even cuboid and needle-shaped particles (l-alanine) can be processed within the CVSF preserving the product quality in terms of particle size distribution (PSD) and preventing breakage or attrition effects. A dynamic image analysis-based approach combining axis length distributions (ALDs) with a kernel-density estimator was used for evaluation. This approach was extended with a quantification of the center of mass of the density-weighted ALDs, providing a measure to analyze the preservation of the inlet PSD statistically. Moreover, a targeted residual moisture below 1% could be achieved by adding a drying module (Tdry = 60 °C) to the modular setup of the CVSF.