This paper presents a nondestructive, stress wave technique to evaluate the prestress levels in posttensioned seven-wire strands. Seven-wire steel strands are widely used in various types of prestressed concrete structures. In this study, both experimental measurements and theoretical analysis were conducted. A commonly used 12.7 mm (1/2-in.) diameter seven-wire prestressing strand was studied. Tensile forces up to 111.2 kN (25 kips) were applied to the strand. A numerical analysis was conducted by accounting for acoustoelasticity effects and the dispersion of waves to calculate the prestress levels in the strands. This analysis provides a successful description of the behavior of a longitudinal transient wave traveling through a long, prestressed, circular strand. The calculation correlates well with the experimental observation. The results indicate that the time of flight of the stress waves can be related to the tension level in the strand. Change of wave velocities at different stress levels was eval...
1 August 1995 in Journal of Structural Engineering
The dynamic response of two C 3 × 4.1 channel steel beams is evaluated in terms of the reduction in load-carrying capacity of the damaged state versus the undamaged stage. The beam specimens are sized and configured to have similar frequency response observed in actual bridges. Each beam is subjected to different damage scenarios, i.e., various types, locations, and degree of damage. For each scenario, the characteristics of the dynamic response are determined from acceleration measurements made during low-level free-vibration tests. A finite-element model was used to calculate the dynamic response of the simulated damaged structures. The experimental and analytical results are scrutinized to correlate increasing deterioration and changes in the dynamic response. Good correlations are found between the experiments and analysis. For each damage scenario, the yield and ultimate-load capacities of the test beams are defined by a damage index. Both experimental and numerical results indicate that there is less than 10% change in the natural frequencies at critical damage state.
24 June 2015 in Journal of Thermal Analysis and Calorimetry
Seven-wire steel strands are widely used in various types of prestressed concrete structures. When a strand is subjected to a tensile force, the traveling time of the stress wave will be affected due to the elongation of the strand together with the changes in wave velocities. In this paper, the Wigner-Ville transform technique was used to analyze the measured stress waves in order to identify the arrival time of each frequency component. A numerical calculation considering the elastic waveguide theory and the acoustoelastic effect was conducted. A commonly used 12.7-mm (1/2 in.) diameter seven-wire prestressing strand (Grade 270) was tested. Tensile force up to 142 kN (32 kips) was applied to the strand. The results indicate that evaluation of the tensile force in the strand can be accomplished by measuring the traveling time of a single-frequency component of the propagating stress wave. The Wigner-Ville transform technique can efficiently identify the arrival time of each frequency component of the str...