The intrinsic modularity and reconfigurability of modular reconfigurable robot (MRR) systems confer advantages such as versatility, fault tolerance, and economic efficacy, thereby showcasing considerable potential across diverse applications. The continuous evolution of the technology landscape and the emergence of diverse conceptual designs have generated multiple MRR categories, each described by its respective morphology or capability characteristics, leading to some ambiguity in the taxonomy. This paper conducts a comprehensive survey covering a wide range of mechanism and design aspects of MRR systems, spanning from 1985 to 2023. It introduces an innovative, unified conceptual framework for understanding MRR hardware, which encompasses three pivotal elements: connectors, actuators, and homogeneity. Through the utilization of this trilateral framework, this paper systematically interprets and classifies MRR systems over the years, aiming to provide a structured taxonomy perspective and enhance understanding of MRR. It explains the fundamental attributes characterizing MRR systems and their compositional aspects, providing insights into their design, technology, functionality, and categorization. Augmented by the proposed trilateral framework, this paper also elaborates on the trajectory of evolution, prevailing trends, principal challenges, and potential prospects within the field of MRR.
This letter proposes a new method combined by the parameterization method and T-IK to solve the inverse kinematics problem of redundant manipulators in the position domain. T-IK is an improved multi-objective optimization algorithm based on NSGA-II. By adding population migration strategy and adaptive interval search operator, we can maintain the global search ability of T-IK and greatly strengthen its local search ability. We applied this method to an 8-DOF tunnel shotcrete robot and its inverse kinematics algorithm needs to meet the accuracy, continuity, real-time requirement and avoid joint limits. We compared T-IK with Bio-IK, TRAC-IK, NSGA-II, MOEA/D and ISGABT algorithms on tunnel trajectory, polyline trajectory and arc trajectory to test it performance. Although T-IK is slightly inferior to MOEA/D in running time, it is much better than other algorithms in almost all indexes.
29 July 2025 in The International Journal of Robotics Research
Modular robotic systems are multi-robot systems comprising numerous repeated modules and can transform into different configurations. Matching system configurations to a library enables efficient automation of modular robotic systems that have high degrees of freedom and strict motion constraints. Many previous approaches have automated cube-oriented modular robots by mapping the predefined sequence of gaits in the library to the module controllers. However, they can hardly drive robust three-dimensional self-reconfigurations without external sensors due to limited gait control accuracy and docking misalignment tolerance. Freeform modular robots are a type of modular robot with no fixed-point connectors, typically featuring continuous spherical joint connections between modules. They exhibit higher docking misalignment tolerance and better environmental adaptability. However, existing library-driven systems are inapplicable to freeform robots due to their redundant degrees of freedom and incompatible self-reconfiguration approaches. This article first proposes an autonomy framework for the locomotion and self-reconfiguration of spherical freeform modular robots. We model module connections as either spherical joints or parallel robots, employing a unified approach for skeletal kinematics. The system achieves the target configuration through iterative inverse kinematics and command translation to module controllers. A library with interfaces for configuration design is proposed, defining behaviors and feasible kinematic transitions between configurations. The executable behavior can be efficiently retrieved from the library by combining the proposed configuration matching and mapping algorithm. The system is validated on the FreeSN system with up to 18 modules containing 48 joint motors, providing a foundation for high-level planning and control research in freeform modular robots.
25 November 2024 in The International Journal of Robotics Research
We address the problem of detecting potential instability in the planned motion of modular self-reconfigurable robots. Previous research primarily focused on determining the system’s unique physical state but overlooked the mutual compensation effects of connection constraints. We introduce a linear-time quasi-static stability detection method for modular self-reconfigurable robots. The internal connections, non-connected contacts, and environmental contacts are considered, and the problem is modeled as a second-order cone program problem, whose solving time linearly increases with the number of modules. We aim to determine the critical stable state of the system and that is achieved by finding the required minimum characteristic connection strength. By analyzing the critical stable state, we can assess the system’s stability and identify potential broken connection points. Furthermore, the internal stability margin is defined to evaluate the configuration’s stability level. The suspension and object manipulation configurations are first demonstrated in simulation to analyze the effectiveness of the proposed algorithm. Subsequently, a series of physical experiments based on FreeSN were carried out. The calculated stable motion ranges of manipulator configurations are highly consistent with the actual sampling boundaries. Moreover, the proposed algorithm successfully predicts stability and identifies broken connections in diverse configurations, encompassing quadruped and closed-chain configurations on both even and uneven terrains. The load experiment further demonstrates that the impacts from unmodeled factors and input errors under normal conditions can be on a small scale. By combining the proposed detection method and stability margin, we open the door to realizing real-time motion planning on modular self-reconfigurable robots.