Motivated by the pursuit of both encryption efficiency and security, this paper presents a symmetric color image encryption algorithm using a novel cross–plane joint scrambling–diffusion method. To provide high–strength security, the color planes are firstly spliced horizontally and then vertically to be adequately encrypted by the joint scrambling–diffusion method. Therefore, minor changes in any pixel can cross every color plane that significantly influences the final cipher image. To achieve fast encryption speed, all employed chaotic systems have simple structures but robust properties to rapidly generate high–quality pseudorandom sequences. Additionally, the joint scrambling–diffusion method is vectorized to handle pixels in parallel for satisfactory execution efficiency. Security tests demonstrate the outstanding security performance of the proposed algorithm, with correlation coefficients and entropies of cipher images being close to 0 and greater than 7.99, respectively, and results of NPCR and UACI tests being similar to ideal cipher images, which can resist statistical, differential, exhaustive, and even chosen ciphertext/plaintext attacks. Moreover, because of the O(4W + 4H) time complexity of the novel scrambling–diffusion method, even a color image with a size of 1024 × 1024 only costs 0.26 s to be encrypted. Hence, the proposed algorithm can satisfy the efficiency and security requirements of color image encryption.
1 July 2023 in Journal of Vacuum Science & Technology B
A multichannel vertical vacuum transistor based on the Fowler–Nordheim tunneling emission mechanism was proposed and numerically investigated. The multichannel structure was demonstrated to be effective in enhancing the drain current when compared to the traditional single-channel structure with the same device size. For example, transconductance increased from 0.42 mS of the single-channel structure to 0.86 mS of the four-channel structure. In addition, when the vacuum channel number increases, the size of a single channel decreases correspondingly, leading to a reduction in electric field intensity on the electron emission surface. Thus, the off-state current dramatically reduced by two orders of magnitude reaching10−15 A according to the simulated results. In other words, the ON/OFF drain current ratio of the multichannel structure is significantly enhanced. Furthermore, the simulation results indicate that the cut-off frequency of the multichannel device is 33% higher than that of the traditional single-channel one reaching 0.19 THz.
Vacuum diodes, based on field emission mechanisms, demonstrate a superior performance in high-temperature operations compared to solid-state devices. However, when considering low operating voltage and continuous miniaturization, the cathode is usually made into a tip structure and the gap between cathode and anode is reduced to a nanoscale. This greatly increases the difficulty of preparation and makes it difficult to ensure fabrication consistency. Here, a metal-insulator-semiconductor (MIS) structural nanoscale vacuum diode, based on thermionic emission, was numerically studied. The results indicate that this device can operate at a stable level in a wide range of temperatures, at around 600 degrees Kelvin above 260 K at 0.2 V voltage bias. Moreover, unlike the conventional vacuum diodes working in field emission regime where the emission current is extremely sensitive to the gap-width between the cathode and the anode, the emission current of the proposed diode shows a weak correlation to the gap-width. These features make this diode a promising alternative to vacuum electronics for large-scale production and harsh environmental applications.
A new kind of temperature sensor based on a vacuum diode was proposed and numerically studied in this paper. This device operated under different electron emission mechanisms according to the electron density in the vacuum channel. The temperature determination ability of this device was only empowered when working in the electric-field-assisted thermionic emission regime (barrier-lowering effect). The simulated results indicated that the temperature-sensing range of this device was around 273 K–325 K with a supply current of 1 μA. To obtain a linear dependency of voltage on temperature, we designed a proportional-to-absolute-temperature (PTAT) circuit. The mathematic derivation of the PTAT voltage is presented in this study. The temperature-sensing sensitivity was calculated as 7.6 mV/K according to the measured I-U (current versus voltage) characteristic. The structure and principle of the device presented in this paper might provide an alternative method for the study of temperature sensors.
8 February 2023 in IEEE Transactions on Electron Devices
A vertical structural air channel transistor with a gate block dielectric layer, which can isolate gate from air channel, was proposed. With the presence of gate block dielectric layer, electrons at the edge of the 2-D electron system (2-DES) formed at gate are prevented to be injected into air channel, which may effectively minish the gate leakage current compared to the conventional vertical structure. The transistor operates in the space-charge-limited (SCL) regime of thermionic emission, which makes it theoretically possess the advantages of high-temperature reliability and low power consumption. Simulation results indicate that this transistor can achieve transconductance of 34.2 $\mu $ S and cutoff frequency of 88.2 GHz by optimizing the dimensional parameters.
27 February 2025 in Journal of Vacuum Science & Technology B
A nanoscale air-channel triode with dual-gate structure was proposed and systematically simulated. The simulation results indicate that with an increase in the gate width, the transconductance of the device initially rises before reaching saturation. Moreover, a thinner gate insulation layer enhances the gate’s ability to modulate current in the channel. When the gate size sufficiently covers the air channel, a decrease in the gate width leads to a higher cutoff frequency of the device. Furthermore, the top and bottom gate structures with unequal dimensions are advantageous for enhancing the device cutoff frequency, particularly when the top gate width exceeds the channel length, while the bottom gate width is narrower. This configuration not only facilitates radiation isolation of the air channel beneath the top gate but also contributes to an improved cutoff frequency.