Detectors are a key feature of the contemporary scientific approach to cultural heritage (CH), both for diagnostics and conservation. INFN-CHNet is the network of the Italian National Institute of Nuclear Physics that develops and applies new instrumentation for the study of CH. This process results in both optimized traditional state-of-the-art and highly innovative detection setups for spectrometric techniques. Examples of the former are X-rays, gamma-rays, visible-light and particles spectrometers tailored for CH applications, with optimized performances, reliability, weight, transportability, cost, absorbed power, and complementarity with other techniques. Regarding the latter, examples are ARDESIA, the array of detectors at the DAΦNE-Light facility, the MAXRS detection setup at the Riken-RAL muon beamline and the imaging facilities at the LENA Laboratory. Paths for next-generation instruments have been suggested, as in the case of the X-ray Superconductive Detectors and X-ray Microcalorimeter Spectrometers, allowing astonishing improvement in energy resolution. Many issues in CH can now be addressed thanks to scientific techniques exploiting the existing detectors, while many others are still to be addressed and require the development of new approaches and detectors.

This contribution focuses on the conservation of an Egyptian wooden sculpture (Inventory Number Cat. 745) belonging to the Museo Egizio of Torino in northwest Italy. A preliminary and interdisciplinary study of constituent painting materials and their layering is here provided. It was conducted by means of a multi-technique approach starting from non-invasive multispectral analysis on the whole object, and subsequently, on selected micro-samples. In particular, visible fluorescence induced by ultraviolet radiation (UVF), infrared reflectography (IRR) and visible--induced infrared luminescence were used on the whole object. The micro-samples were analysed by means of an optical microscope with visible and UV light sources, a scanning electron microscope (SEM) with an energy-dispersive X-ray spectrometer (EDX), Fourier transform infrared (FT-IR) spectrometer, pyrolysis-gas chromatography/mass spectrometer (Py-GC/MS) and micro-particle induced X-ray emission (PIXE). The characterization of the painting materials allowed the detection of Egyptian blue and Egyptian green, and also confirmed the pertinence of the top brown layer to the original materials, which is a key point to design a suitable surface treatment. In fact, due to the water sensitiveness of the original materials, only few options were available to perform cleaning operations on this artwork. To setup the cleaning procedure, we performed several preliminary tests on mockups using dry cleaning materials, commonly used to treat reactive surfaces, and innovative highly water retentive hydrogels, which can potentially limit the mechanical action on the original surface while proving excellent cleaning results. Overall, this study has proved fundamental to increase our knowledge on ancient Egyptian artistic techniques and contribute to hypothesize the possible provenance of the artefact. It also demonstrated that polyvinyl alcohol-based retentive gels allow for the safe and efficient cleaning of extremely water sensitive painted surfaces, as those typical of ancient Egyptian artefacts.

Diagnostic physical methods are increasingly applied to Cultural Heritage both for scientific investigations and conservation purposes. In particular, the X-ray imaging techniques of computed tomography (CT) and digital radiography (DR) are non-destructive investigation methods to study an object, being able to give information on its inner structure. In this paper, we present the results of the X-ray imaging study on an ancient Egyptian statuette (Late Period 722–30 BCE) belonging to the collection of Museo Egizio in Torino and representing an Egyptian goddess called Taweret, carved on wood and gilded with some colored details. Since few specific studies have been focused on materials and techniques used in Ancient Egypt for gilding, a detailed investigation was started in order to verify the technical features of the decoration in this sculpture. Specifically, DR and CT analyses have been performed at the Centro Conservazione e Restauro “La Venaria Reale” (CCR), with a new high resolution flat-panel detector, that allowed us to perform tomographic analysis reaching a final resolution better than the one achievable with the previous apparatus operating in the CCR.

At present, the use of non-destructive, non-invasive X-ray-based techniques is well established in heritage science for the analysis and conservation of works of art. X-ray fluorescence (XRF) plays a fundamental role since it provides information on the elemental composition, contributing to the identification of the materials present on the superficial layers of an artwork. Whenever XRF is combined with the capability of scanning an area to provide the elemental distribution on a surface, the technique is referred to as macro X-ray fluorescence (MA-XRF). The heritage science field, in which the technique is extensively applied, presents a large variety of case studies. Typical examples are paintings, ceramics, metallic objects and manuscripts. This work presents an uncommon application of MA-XRF analysis to furniture. Measurements have been carried out with the MA-XRF scanner of the INFN-CHNet collaboration at the Centro di Conservazione e Restauro “La Venaria Reale”, a leading conservation centre in the field. In particular, a chinoiserie lacquered cabinet of the 18th century and a desk by Pietro Piffetti (1701–1777) have been analysed with a focus on the characterisation of decorative layers and different materials (e.g., gilding in the former and ivory in the latter). The measurements have been carried out using a telemeter for non-planar surfaces, and with collimators of 0.8 mm and 0.4 mm diameter, depending on the spatial resolution needed. The combination of the small measuring head with the use of the telemeter and of a small collimator has guaranteed the ability to scan difficult-to-reach areas with high spatial resolution in a reasonable time (20 × 10 mm² with 0.2 mm step in less than 20 min).

Digital radiography and computed tomography are two fundamental diagnostic techniques in different fields of research, including cultural heritage studies and gemmology. The application of these physical methods of investigation has gained considerable importance as they are non-invasive techniques. The presented work has been mainly focused on micro-tomographic analysis. The project is concerned with the study of natural and cultivated pearls in order to develop an investigation methodology for the analysis, distinction and characterization of different types of pearls, some of them belonging to different precious jewels from private collections. The investigations, carried out on a total of 22 heterogeneous types of pearls, allowed us to establish their origin (natural or cultivated) or to confirm/deny if a hypothesis was already expressed, and as well to highlight the cultivation methodology used case by case. Furthermore, it was possible to ascertain how large and varied the market for cultured pearls is nowadays and how difficult is, in some particular cases, to ascertain their attribution to a certain origin.