A terahertz metamaterial refractive index/thickness sensor with flexible substrate, exhibiting low-frequency Fano resonance and high-frequency electromagnetically induced transparent (EIT) resonance, is proposed. The physical formation mechanisms of Fano and EIT resonances are investigated by calculating the electromagnetic field. Simulated results demonstrate that the refractive index sensing sensitivity based these two resonances are up to 60 and 100 GHz/RIU, and the thickness sensing sensitivity are up to 1 and 1.7 GHz/μm, respectively. Furthermore, the proposed sensor was fabricated using femtosecond laser etching technology, and its sensing performance was verified by the experimental results that it can distinguish different liquids and detect the polyimide film with different thicknesses less than 180 μm. The remarkable performances make the proposed metamaterial sensor has feasible capability for biological and chemical sensing in terahertz range.

Fouling is a great problem that significantly affects the continuous operation for large-scale radio-frequency (RF) thermal plasma synthesizing nanopowders. In order to eliminate or weaken the phenomenon, numerical simulations based on FLUENT software were founded to investigate the effect of operation parameters, including feeding style of central gas and sheath gas, on plasma torches. It is shown that the tangential feeding style of central gas brings serious negative axial velocity regions, which always forces the synthesized nanopowders to “back-mix”, and further leads to the fouling of the quartz tube. Moreover, it is shown that sheath gas should be tangentially fed into the plasma reactor to further eliminate the gas stream’s back-mixing. However, when this feeding style is applied, although the negative axial velocity region is decreased, the plasma gas and kinetic energy of the vapor phase near the wall of the plasma reactor are less and lower, respectively; as a result, that plasma flame is more difficult to be arced. A new plasma arcing method by way of feeding gun instead of torch wall was proposed and put in use. The fouling problem has been well solved and plasma arcing is well ensured, and as a result, the experiment on large-scale production of nanopowders can be carried out for 8 h without any interruption, and synthesized Si and Al₂O₃ nanopowders exhibit good dispersion and sphericity.

Sensitive detection of terahertz fingerprint absorption spectrum for tiny molecules is essential for bioanalysis. However, it is extremely challenging for traditional terahertz spectroscopy measurement because of the weak spectral response caused by the large mismatch between terahertz wavelengths and biomolecular dimensions. Here, we proposed a wideband-tunable metal plasmonic terahertz biosensor to detect tiny biomolecules, employing attenuated total reflection in an Otto prism configuration and tightly confined spoof surface plasmons on the grooved metal surface. Benefitting from the plasmonic electric field enhancement, such a biosensor is able to identify the molecular terahertz fingerprints. As a proof of concept, a hypothetical molecule modeled by the Lorentz model with two vibrational modes is used as the sensing analytes. Simulation results show that the absorption of two vibrational modes of analytes can be selectively enhanced up to ten times by plasmonic resonance, and their fingerprints can be resolved by sweeping incident angle in a wide waveband. Our work provides an effective approach for the highly sensitive identification of molecular fingerprints in fields of biochemical sensing for tiny analytes.

Recently, hierarchical hybrid structures based on the combination of semiconductor micro/nanostructures and noble metal nanoparticles have become a hot research topic in the area of surface-enhanced Raman scattering (SERS). In this work, two core-satellite nanostructures of metal oxide/metal nanoparticles were successfully introduced into SERS substrates, assembling monodispersed small silver nanoparticles (Ag NPs) on large polydispersed ZnO nanospheres (p-ZnO NSs) or monodispersed ZnO nanospheres (m-ZnO NSs) core. The p-ZnO NSs and m-ZnO NSs were synthesized by the pyrolysis method without any template. The Ag NPs were prepared by the thermal evaporation method without any annealing process. An ultralow limit of detection (LOD) of 1 × 10⁻¹³ M was achieved in the two core-satellite nanostructures with Rhodamine 6G (R6G) as the probe molecule. Compared with the silicon (Si)/Ag NPs substrate, the two core-satellite nanostructures of Si/p-ZnO NSs/Ag NPs and Si/m-ZnO NSs/Ag NPs substrates have higher enhancement factors (EF) of 2.6 × 10⁸ and 2.5 × 10⁸ for R6G as the probe molecule due to the enhanced electromagnetic field. The two core-satellite nanostructures have great application potential in the low-cost massive production of large-area SERS substrates due to their excellent SERS effect and simple preparation process without any template.

Single nanowires (NWs) are of great importance for optoelectronic applications, especially solar cells serving as powering nanoscale devices. However, weak off-resonant absorption can limit its light-harvesting capability. Here, we propose a single NW coated with the graded-index dual shells (DSNW). We demonstrate that, with appropriate thickness and refractive index of the inner shell, the DSNW exhibits significantly enhanced light trapping compared with the bare NW (BNW) and the NW only coated with the outer shell (OSNW) and the inner shell (ISNW), which can be attributed to the optimal off-resonant absorption mode profiles due to the improved coupling between the reemitted light of the transition modes of the leak mode resonances of the Si core and the nanofocusing light from the dual shells with the graded refractive index. We found that the light absorption can be engineered via tuning the thickness and the refractive index of the inner shell, the photocurrent density is significantly enhanced by 134% (56%, 12%) in comparison with that of the BNW (OSNW, ISNW). This work advances our understanding of how to improve off-resonant absorption by applying graded dual-shell design and provides a new choice for designing high-efficiency single NW photovoltaic devices.

This study proposed a lithography method for fabricating periodic nanostructures using the interference of four-beam TE₀ guided modes excited by a 193 nm deep ultraviolet laser. The physical mechanism and normalized electric field intensity distribution of four-beam TE₀ guided mode interference were theoretically analyzed and numerically simulated using the finite element method. The simulation results confirmed the ability of this method to fabricate periodic structures with a half-pitch resolution of 30.35 nm (approximately λ/6.36), an aspect ratio of 3.95, and a contrast ratio of 1. The theoretically calculated value of the resolution was consistent with the numerical simulation value. The resolution and aspect ratio of the fabricated nanostructures could be adjusted through changes to the thickness of the resist. Moreover, the shape of the fabricated nanostructures, such as the one-dimensional sub-wavelength grating structure and two-dimensional square array lattice structure, were adjustable via changes to the number and azimuth of the excited TE₀ guided modes. The results obtained in this study provide valuable theoretical information for the practical manufacture of ultra-high-resolution lithography.