This paper presents a new prototype for being used as a travel aid for blind people. The system is developed to complement traditional navigation systems such as white cane and guide dogs. The system consists of two stereo cameras and a portable computer for processing the environmental information. The aim of the system is to detect the static and dynamic objects from the surrounding environment and transform them into acoustical signals. Through stereophonic headphones, the user perceives the acoustic image of the environment, the volume of the objects, moving object direction and trajectory, its distance relative to the user and the free paths in a range of 5m to 15m. The acoustic signals represent short train of delta sounds externalized with non-individual Head-Related Transfer Functions generated in an anechoic chamber. Experimental results show that users were able to control and navigate with the system safety both in familiar and unfamiliar environments.

This paper presents the development of a portable system with the aim of allowing blind people to detect and recognize Euro banknotes. The developed device is based on a Raspberry Pi electronic instrument and a Raspberry Pi camera, Pi NoIR (No Infrared filter) dotted with additional infrared light, which is embedded into a pair of sunglasses that permit blind and visually impaired people to independently handle Euro banknotes, especially when receiving their cash back when shopping. The banknote detection is based on the modified Viola and Jones algorithms, while the banknote value recognition relies on the Speed Up Robust Features (SURF) technique. The accuracies of banknote detection and banknote value recognition are 84% and 97.5%, respectively.

In this paper, we investigate the acoustic behaviour of building elements made of concrete doped with waste-tire rubber. Three different mixtures were created, with 0%, 10%, and 20% rubber in their composition. Bricks, lattice joists, and hollow blocks were manufactured with each mixture, and three different cells were built and tested against aerial and impact noise. The values of the global acoustic isolation and the reduction of the sound pressure level of impacts were measured. Results proved that highly doped elements are an excellent option to isolate low frequency sounds, whereas intermediate and standard elements constitute a most interesting option to block middle and high frequency sounds. In both cases, the considerable amount of waste-tire rubber recycled could justify the employment of the doped materials for the sake of the environment.

This paper presents a new Electronic Travel Aid (ETA) ‘Acoustic Prototype’ which is especially suited to facilitate the navigation of visually impaired users. The device consists of a set of 3-Dimensional Complementary Metal Oxide Semiconductor (3-D CMOS) image sensors based on the three-dimensional integration and Complementary Metal-Oxide Semiconductor (CMOS) processing techniques implemented into a pair of glasses, stereo headphones as well as a Field-Programmable Gate Array (FPGA) used as processing unit. The device is intended to be used as a complementary device to navigation through both open known and unknown environments. The FPGA and the 3D-CMOS image sensor electronics control object detection. Distance measurement is achieved by using chip-integrated technology based on the Multiple Short Time Integration method. The processed information of the object distance is presented to the user via acoustic sounds through stereophonic headphones. The user interprets the information as an acoustic image of the surrounding environment. The Acoustic Prototype transforms the surface of the objects of the real environment into acoustical sounds. The method used is similar to a bat's acoustic orientation. Having good hearing ability, with few weeks training the users are able to perceive not only the presence of an object but also the object form (that is, if the object is round, if it has corners, if it is a car or a box, if it is a cardboard object or if it is an iron or cement object, a tree, a person, a static or moving object). The information is continuously delivered to the user in a few nanoseconds until the device is shut down, helping the end user to perceive the information in real time.