In response to the digital transformation in education, this study explores the efficacy of virtual reality (VR) video games in teaching direct current electrical circuits at a public university in Colombia. Using a mixed-method action research approach, this study aimed to design, implement, and evaluate a VR-based educational strategy to enhance undergraduate learning experiences. The methodology integrated VR into the curriculum, facilitating a comparison of this innovative approach with traditional teaching methods. The results indicate that the VR strategy significantly improved students’ comprehension of electrical circuits and increased engagement, demonstrating the utility of immersive technologies in educational settings. Challenges such as the need for technological integration and curriculum adaptation were also identified. This study concludes that VR video games can effectively augment electrical engineering education, offering a model for incorporating advanced digital tools into higher education curricula. This approach aligns with ongoing trends in digital transformation, suggesting significant potential for broad applications across various educational contexts.
Shot peening (SP) is a surface cold hardening process used on metals to enhance life under cyclic stress. In this case, SP was applied to SAE5160H samples of steel quenched tempered in oil at 460 °C used for leaf springs. This study shows the residual surface stresses measured through X-ray diffraction (XRD) and the microhardness variation through the perpendicular-to-the-peened surface using a combination of metallographic preparation and Vickers microhardness (HVN). This combination of techniques makes possible measuring the SP effect in perpendicular-to-the-treated surface. A residual stress of -365.8 ± 78 MPa measured by XRD and a maximum microhardness of 525± at 92.7 HVN on the surface were obtained for the SP material. Alternatively, an average of 54.2 ± 54.3 MPa residual stress measured by XRD and 433 ± 39.5 HVN were obtained for the As-it-is samples. In addition, corrosion electrochemical potential tests showed that SP increases the corrosion potential, which makes this process undesirable if the SP component is exposed to aggressive environments. Moreover, the As-it-is samples presented not statistically significant HVN difference in the measured points. The combination of experimental techniques allows estimating hardness change in perpendicular-to-the treated surface separated by as little as 10 µm but with a simpler specimen preparation than other techniques such as XRD or strain gauges. Such a combination can be an alternative for estimating residual stresses through depth.
This article studies the influence of the tensile speed when testing plastic products used to transport containers that may contain various liquids (drinking water, windshield fluid, cleaning agents, etc.). This case study was conducted on certain parts, generally called "handles", which are basically plastic items obtained largely from recycled technological waste resulting from the injection process of various packaging related to the food industry polyethylene caps and lids more precisely. During the handling and transport process, these parts are subjected to various static stresses, therefore, a minimum mechanical resistance is required. Fatigue stress has not been performed due to a limited number of duty cycles. To determine these quality characteristics, multiple measurements of tensile strength and elongations were performed at different traction speeds, measurements that have been validated on the market for several years. We have observed that testing speed over 500 mm/min is not necessary because the tensile strength values do not vary significantly. These results are very important in determining the constructive form of these products and the methods for validating quality indicators. Also, we have proposed to identify a method able to assess the mechanical performance of the product used in nonstandard conditions. The study can be used for a much wider range of similar applications in the plastics industry.