4-Nitrophenol (4-NP) is an organic pollutant found in the wastewater discharged from coking and petrochemical industries, and it is highly toxic, persistent, and bioaccumulative. 4-NP is difficult to degrade and causes serious damage to human health and the ecological environment. In this study, MgCo-3D hydrotalcite nanospheres were synthesized via the hot solvent method using ZIF-67 as a template for 4-NP removal from wastewater. The composition and structure of MgCo-3D hydrotalcite nanospheres were characterized via X-ray diffraction (XRD), Scanning electron microscope (SEM), Transmission Electron Microscope (TEM), Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), Energy Dispersive Spectroscopy (EDS), and BET analyses. The maximum adsorption capacity was 131.59 mg g−1 under the optimized conditions (pH = 7, t = 298 K, C0 = 50 mg L−1, dose = 0.4 g L−1). The adsorption obeyed the Langmuir, Redlich–Peterson and Sips models and pseudo-second-order kinetics, and the adsorption activation energy was 29.4 kJ mol−1, indicating a monolayer physical adsorption phenomenon. The adsorption of 4-NP on the MgCo-3D hydrotalcite nanospheres mainly involved hydrogen bonding and electrostatic interactions. The nanospheres were regenerated using the hot-air purging method. After five adsorption–desorption cycles, the adsorption capacity reached 107.6 mg g−1, indicating the good regeneration performance of the MgCo-3D hydrotalcite nanospheres.
Petrochemical wastewater contains p-nitrophenol, a highly toxic, bioaccumulative and persistent pollutant that can harm ecosystems and environmental sustainability. In this study, ZIF-8-PhIm was prepared for p-nitrophenol removal from petrochemical wastewater using solvent-assisted ligand exchange (SALE) with 2-phenylimidazole(2-PhIm). The ZIF-8-PhIm’s composition and structure were characterised using the XRD, SEM, FT-IR, 1H NMR, XPS and BET methods. The adsorption effect of ZIF-8-PhIm on p-nitrophenol was investigated with the static adsorption method. Compared to the ZIF-8 materials, ZIF-8-PhIm exhibited stronger π-π interactions, produced a multistage pore structure with larger pore capacity and size, and had increased hydrophilicity and exposure of adsorption sites. Under optimised conditions (dose = 0.4 g/L, T = 298 K, C0 = 400 mg/L), ZIF-8-PhIm achieved an adsorption amount of 828.29 mg/g, which had a greater p-nitrophenol adsorption capacity compared to the ZIF-8 material. The Langmuir isotherm and pseudo-second-order kinetic models appropriately described the p-nitrophenol adsorption of ZIF-8-PhIm. Hydrogen bonding and π-π interactions dominated the p-nitrophenol adsorption of ZIF-8-PhIm. It also had relatively good regeneration properties.
Due to rapid socioeconomic development, increased phosphorus concentrations can cause eutrophication of water bodies, with devastating effects on environmental sustainability and aquatic ecosystems. In this study, ZIF-8-PhIm was prepared for phosphorus removal using 2-phenylimidazole via the solvent-assisted ligand exchange (SALE) method. The structure and composition of ZIF-8-PhIm were characterized by various methods, including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), 1H nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), and Brunauer-Emmett-Teller (BET) analysis. Compared to the ZIF-8 material, it exhibited a multistage pore structure with larger pore capacity and pore size, increased hydrophilicity, exposure of more adsorption sites, and also stronger electrostatic interaction. Under optimized conditions (T = 298 K, C0 = 150 mg/L, dose = 0.2 g/L), the adsorption capacity of ZIF-8-PhIm reached 162.93 mg/g, which was greater than that of the ZIF-8 material (92.07 mg/g). The Langmuir isotherm and pseudo-second-order kinetic models were suitable for describing the phosphate adsorption of ZIF-8-PhIm. The main effects of ZIF-8-PhIm on phosphate adsorption were Zn-O-P bonding and electrostatic interactions. It also had good regeneration properties. The ZIF-8-PhIm/CS spheres were prepared using chitosan (CS) as the cross-linking agent. The results of dynamic adsorption experiments on the spheres showed a saturation capacity of 85.69 mg/g and a half-penetration time of 514.15 min at 318 K according to the fitted results.