Thomas Trantow

Dr. Thomas Trantow

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 February 2017 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
UHUte Herzfeld
Ute Herzfeld
TTThomas Trantow
Thomas Trantow
DHDavid Harding
David Harding
PDPhilip W. Dabney
Philip W. Dabney
Glacial acceleration is a main source of uncertainty in sea-level-change assessment. Measurement of ice-surface heights with a spatial and temporal resolution that not only allows elevation-change calculation, but also captures ice-surface morphology and its changes is required to aid in investigations of the geophysical processes associated with glacial acceleration. The Advanced Topographic Laser Altimeter System aboard NASA's future ICESat-2 Mission (launch 2017) will implement multibeam micropulse photon-counting lidar altimetry aimed at measuring ice-surface heights at 0.7-m along-track spacing. The instrument is designed to resolve spatial and temporal variability of rapidly changing glaciers and ice sheets and the Arctic sea ice. The new technology requires the development of a new mathematical algorithm for the retrieval of height information. We introduce the density-dimension algorithm (DDA) that utilizes the radial basis function to calculate a weighted density as a form of data aggregation in the photon cloud and considers density an additional dimension as an aid in autoadaptive threshold determination. The autoadaptive capability of the algorithm is necessary to separate returns from noise and signal photons under changing environmental conditions. The algorithm is evaluated using data collected with an ICESat-2 simulator instrument, the Slope Imaging Multi-polarization Photon-counting Lidar, over the heavily crevassed Giesecke Brær in Northwestern Greenland in summer 2015. Results demonstrate that ICESat-2 may be expected to provide ice-surface height measurements over crevassed glaciers and other complex ice surfaces. The DDA is generally applicable for the analysis of airborne and spaceborne micropulse photon-counting| lidar data over complex and simple surfaces.

18 April 2023 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
UHUte Herzfeld
Ute Herzfeld
TTThomas Trantow
Thomas Trantow
HHHuilin Han
Huilin Han
EBEllen Buckley
Ellen Buckley
SFSinéad Louise Farrell
Sinéad Louise Farrell
MLMatthew Lawson
Matthew Lawson
As climate warms and the transition from a perennial to a seasonal Arctic sea-ice cover is imminent, understanding melt ponding is central to understanding changes in the new Arctic. NASA’s Ice, Cloud and land Elevation Satellite (ICESat-2) has the capacity to provide measurements and monitoring of the onset of melt in the Arctic and on melt progression. Yet ponds are currently not identified on the ICESat-2 standard sea-ice products, in which only a single surface is determined. The objective of this paper is to introduce a mathematical algorithm that facilitates automated detection of melt ponds in ICESat-2 ATLAS data, retrieval of two surface heights, pond surface and bottom, and measurements of depth and width of melt ponds. With the Advanced Topographic Laser Altimeter System (ATLAS), ICESat-2 carries the first space-borne multi-beam micro-pulse photon-counting laser altimeter system, operating at 532 nm frequency. ATLAS data are recorded as clouds of discrete photon points. The Density-Dimension Algorithm for bifurcating sea-ice reflectors (DDA-bifurcate-seaice) is an auto-adaptive algorithm that solves the problem of pond detection near the 0.7 m nominal along-track spacing of ATLAS data, utilizing the radial basis function for calculation of a density field and a threshold function that automatically adapts to changes in background, apparent surface reflectance and some instrument effects. The DDA-bifurcate-seaice is applied to large ICESat-2 data sets from the 2019 and 2020 melt seasons in the multi-year Arctic sea-ice region. Results are evaluated by comparison to those from a manually forced algorithm.

27 February 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
UHUte Herzfeld
Ute Herzfeld
MLMatthew Lawson
Matthew Lawson
TTThomas Trantow
Thomas Trantow
TNThomas Nylen
Thomas Nylen
The topic of this paper is the airborne evaluation of ICESat-2 Advanced Topographic Laser Altimeter System (ATLAS) measurement capabilities and surface-height-determination over crevassed glacial terrain, with a focus on the geodetical accuracy of geophysical data collected from a helicopter. To obtain surface heights over crevassed and otherwise complex ice surface, ICESat-2 data are analyzed using the density-dimension algorithm for ice surfaces (DDA-ice), which yields surface heights at the nominal 0.7 m along-track spacing of ATLAS data. As the result of an ongoing surge, Negribreen, Svalbard, provided an ideal situation for the validation objectives in 2018 and 2019, because many different crevasse types and morphologically complex ice surfaces existed in close proximity. Airborne geophysical data, including laser altimeter data (profilometer data at 905 nm frequency), differential Global Positioning System (GPS), Inertial Measurement Unit (IMU) data, on-board-time-lapse imagery and photographs, were collected during two campaigns in summers of 2018 and 2019. Airborne experiment setup, geodetical correction and data processing steps are described here. To date, there is relatively little knowledge of the geodetical accuracy that can be obtained from kinematic data collection from a helicopter. Our study finds that (1) Kinematic GPS data collection with correction in post-processing yields higher accuracies than Real-Time-Kinematic (RTK) data collection. (2) Processing of only the rover data using the Natural Resources Canada Spatial Reference System Precise Point Positioning (CSRS-PPP) software is sufficiently accurate for the sub-satellite validation purpose. (3) Distances between ICESat-2 ground tracks and airborne ground tracks were generally better than 25 m, while distance between predicted and actual ICESat-2 ground track was on the order of 9 m, which allows direct comparison of ice-surface heights and spatial statistical characteristics of crevasses from the satellite and airborne measurements. (4) The Lasertech Universal Laser System (ULS), operated at up to 300 m above ground level, yields full return frequency (400 Hz) and 0.06–0.08 m on-ice along-track spacing of height measurements. (5) Cross-over differences of airborne laser altimeter data are −0.172 ± 2.564 m along straight paths, which implies a precision of approximately 2.6 m for ICESat-2 validation experiments in crevassed terrain. (6) In summary, the comparatively light-weight experiment setup of a suite of small survey equipment mounted on a Eurocopter (Helicopter AS-350) and kinematic GPS data analyzed in post-processing using CSRS-PPP leads to high accuracy repeats of the ICESat-2 tracks. The technical results (1)–(6) indicate that direct comparison of ice-surface heights and crevasse depths from the ICESat-2 and airborne laser altimeter data is warranted. Numerical evaluation of height comparisons utilizes spatial surface roughness measures. The final result of the validation is that ICESat-2 ATLAS data, analyzed with the DDA-ice, facilitate surface-height determination over crevassed terrain, in good agreement with airborne data, including spatial characteristics, such as surface roughness, crevasse spacing and depth, which are key informants on the deformation and dynamics of a glacier during surge.

4 August 2018 in Journal of Geophysical Research: Earth Surface
Verified
Journal Article
Open access
PDF file
TTThomas Trantow
Thomas Trantow
UHUte Herzfeld
Ute Herzfeld
One of the largest sources of uncertainty in sea level rise prediction is glacial acceleration, of which the surge phenomenon is the least understood type. The surge of the Bering Bagley Glacier System (BBGS), Alaska, in 2011–2013 has provided a rare opportunity to study the surge phenomenon in a large and complex glacier system. A surge results in widespread crevassing throughout the glacier system complicating many traditional techniques used to study glacier dynamics. In this paper, we utilize crevassing as a means to investigate the recent BBGS surge through numerical modeling and geostatistical data analysis. Following the principles of structural glaciology, image‐based crevasse characterizations are obtained through geostatistical methods applied to Landsat‐7 data, supplemented by airborne field observations. On the modeling side, a 3‐D full‐Stokes finite element model of the BBGS is developed and applied to investigate ice dynamics and surface structures during the recent surge. A von Mises criterion is adopted to simulate crevassing at the glacier surface, oriented along the axes of maximum principal tensile stress. To facilitate evaluation of model‐ and data‐derived crevasse characteristics, three different comparison methods are introduced. General agreement in the model‐data comparisons indicates that the model has the ability to represent the BBGS system during peak acceleration. The crevasse‐based approach is also employed to optimize the basal sliding parameter and the von Mises stress threshold in the model. Results further indicate that bed topography is an important constraint in modeling the surge process.

17 October 2022
Verified
Conference Paper
Closed access
CPChristopher Parrish
Christopher Parrish
LMLori Magruder
Lori Magruder
UHUte Herzfeld
Ute Herzfeld
NTNathan Marc Thomas
Nathan Marc Thomas
JMJonathan Markel
Jonathan Markel
IFIsabel Caballero De Frutos
Isabel Caballero De Frutos
Since the 2018 launch of NASA’s ICESat-2 mission, one capability of its Advanced Topographic Laser Altimeter System (ATLAS) that has far exceeded expectations is bathymetric measurement. Although ICESat-2 was designed to generate surface-specific along-track and gridded data products, bathymetry was not a pre-launch science requirement of the mission. However, since launch, ATLAS has proven capable of bathymetric measurement to >40m in very clear waters [1], and ICESat-2 bathymetry is being used in a growing number of science disciplines. Post-launch efforts have focused on bathymetric signal classification (sea surface, water column and seafloor) and correction for refraction at the air-water interface. Because ATLAS provides bathymetry only along discrete tracks, another area of focus is on integration of ATLAS data with relative bathymetry from multispectral satellite imagery-often referred to as satellite-derived bathymetry (SDB)-to obtain spatially-contiguous 2D bathymetric coverage. This paper synthesizes the latest algorithms, techniques and uses of ICESat-2 bathymetry, including collaborative efforts of the Bathymetry Working Group of the ICESat-2 Science Team, and recommends topics for future investigation.

28 June 2016 in International Journal of Remote Sensing
Verified
Journal Article
Closed access
TTThomas Trantow
Thomas Trantow
UHUte Herzfeld
Ute Herzfeld
CryoSat-2 radar altimeter data have been applied to map surface elevations of the Greenland and Antarctic ice sheets, and of Arctic icecaps. In this article we investigate the feasibility of using CryoSat-2 data for spatiotemporal analysis of surface elevation of a large mountain glacier. Bering Glacier, Alaska (which is 8–20 km wide and approximately 80 km long) is selected as a study area because it surges and hence shows short-term elevation changes. The approach includes a correction method, geostatistical analysis, and several methods for error assessment. A time series of digital elevation models (DEMs) is derived for six-month increments from Summer 2011 to Winter 2013/2014. DEMs have, on average, numerical Kriging errors of 1.65 + 3.19 m and Kriging estimation standard deviations of 11.32 + 1.01 m. A crossover analysis with airborne laser altimeter data from the fall months of 2011, 2012, and 2013 produced differences of 5.03 + 13.67 m compared to respective CryoSat-2 data sets. Difference maps are derived from the DEMs and are used to infer dynamical changes associated with the recent surge. In conclusion, CryoSat-2 data can be employed for spatiotemporal mapping of the evolution of surface elevation in Bering Glacier and other mountain glaciers of similar width, while providing key insight into large-scale elevation change over relatively short time periods.