Pore-scale variables, specifically porosity and permeability, are vital in deep resource exploration projects like geothermal energy and shale gas. Digital rock measurement techniques (DRMTs) are commonly employed to match these variables with experimental results. However, limited attention has been given to identifying errors and size effects on pores and pore scale variables, as well as spatial heterogeneous characteristics of pore-networks. In this research, we define pore scale variables and investigate the size effects on these variables through statistical analysis. Additionally, we propose novel empirical formulas for predicting porosity and permeability based on X-ray CT images acquired at varying resolutions from the same carbonate rock sample. Our results indicate that the scanning direction has minimal influence on the physical and hydraulic properties, while these properties are significantly affected by image resolution. The porosity and permeability calculated using the proposed formulas show good agreement with experimental results, with errors below 10%. Consequently, the proposed formulas prove to be effective and reliable in evaluating physical and hydraulic properties based on DRMTs.
Deep excavations in soft soil present a significant threat to adjacent operational metro tunnels. Based on an actual engineering project, field displacement monitoring and analysis were first conducted to establish a validated three-dimensional FLAC3D numerical model. This calibrated model is adopted to carry out systematic single-factor sensitivity analysis encompassing three core design indicators, and further quantifies the influences of groundwater seepage and uncertainties in soil parameters, thereby filling the research gap of integrated multi-index quantitative control criteria for pit–tunnel projects in Nanjing soft soil strata. The sensitivity analysis clarifies tunnel deformation responses concerning pit–tunnel clearance, the number of internal struts, and the retaining pile embedment ratio. Results indicate that tunnel deformation exhibits a ‘middle-large, ends-small’ pattern, with an optimal safe clearance of 8 m, a minimum requirement of three inner struts, and a critical embedment ratio of 0.34. Groundwater seepage increased tunnel deformation by 13.84% horizontally and 11.64% vertically; however, all critical thresholds remained valid. The proposed thresholds also demonstrated robustness under ±20% variation in key soil parameters. These quantitative findings are derived from Nanjing soft soil conditions and provide localized design references for similar metro-adjacent excavations in the region.