In recent years, the discrete element method (DEM) has been widely used to study the factors affecting the repose angle and calibrate particle parameters for simulations. In this paper, DEM is used to study the effects of the coefficient of rolling and static friction of pellet, sinter and coke particles on the repose angle. By comparison of the results of simulations and physical experiments, the coefficients of rolling and static friction suitable for simulation work are determined. The results demonstrate that repose angle increases with the coefficient of rolling and static friction, but the rate of increase gradually decays, when the coefficient of rolling friction exceeds 0.4 or the coefficient of static friction exceeds 0.35. The coefficient of static friction has a greater impact on the repose angle than the coefficient of rolling friction. The rougher of the base surface, the larger the repose angle of the formed particle piled. It can be concluded that appropriate coefficient of rolling and static friction for simulations can be obtained by the outlined procedure.

Electric arc furnace dust (EAFD) is a hazardous by-product of steel production. As global steel output increases, substantial amounts of EAFD are produced, which causes significant environmental issues. EAFD contains amounts of Fe and Zn, which could be reused as raw materials in the steelmaking process. However, zinc oxides can be reduced and vaporized during this process, forming zinc vapor that contaminates equipment surfaces and causes damage. Consequently, various pyrometallurgical methods have been proposed for zinc removal from EAFD. Due to the extensive usage of carbonaceous materials, these methods contribute to significant CO2, raising concerns about greenhouse gas emissions. Microwave heating offers an efficient, energy-saving, and environmentally friendly alternative to pyrometallurgical approaches. EAFD can generate heat under microwave irradiation without carbon addition, which means the CO2 emissions can be reduced by replacing the reductant in the microwave heating process. Furthermore, microwaves enhance zinc removal reactions to a certain extent, resulting in higher efficiency. Thus, employing microwave heating for EAFD processing has significant potential for future development. This paper reviews recent research on using microwave heating for zinc removal from EAFD, focusing on the heating behavior of EAFD in microwaves and the mechanisms of zinc removal. This review will be crucial for researchers working on processing EAFD using microwave heating and could help guide the development of more sustainable and efficient methods.