Polycyclic aromatic hydrocarbons (PAHs) are chemically recalcitrant carcinogenic and mutagenic compounds with primarily anthropogenic origin. The investigation of the effects of emissions from energy enterprises on soil microbiomes is of a high priority for modern soil science. In this study, metagenomic profiling of technogenic contaminated soils was carried out based on bioinformatic analysis of shotgun metagenome data with PAH-degrading genes identification. The use of prokaryotic consortia has been often used as one of the bio-remediation approaches to degrade PAHs with different molecular weight. Since the process of PAH degradation predominantly includes non-culturable or yet-to-be cultured species, metagenomic approaches are highly recommended for studying the composition and metabolic abilities of microbial communities. In this study, whole metagenome shotgun sequencing of DNA from two soils with varying PAH levels was performed. In the control site, the total content of 12 priority PAHs was 262 µg kg−1. The background soil levels in the polluted site for PAHs with 3 or more rings exceeded this, at 800 µg kg−1. The abundance of genes and taxa associated with PAH degradation in these two sites were estimated. Despite differences in PAH concentrations up to 1200 µg kg−1, individual and operon-organized PAH degradation genes were almost equally abundant and diverse in pristine and highly contaminated areas. The most numerous taxa in both spots were actinobacteria from Terrabacteria group. In addition to well-known PAH degraders such as Gordonia and Rhodococcus, genes corresponding to the PAH degradation were found in Azoarcus, Burkholderia and Variovorax. The data shows non-specificity and multifunctionality of metabolic pathways encoded in the genes of PAH-degrading microorganisms.
The large-scale studies of the Lower Don and the Taganrog Bay coastal zone were carried out to determine the background concentrations of polycyclic aromatic hydrocarbons (PAHs) in soils. The content of 15 priority PAHs was determined by saponification method with HPLC detection and varied widely from 77 µg kg−1 to 16,017 µg kg−1 with mean and median values of 1040 µg kg−1 and 406 µg kg−1, respectively. PAHs’ highest concentration level was observed in the soils of the Don River delta and industrial areas of Taganrog city affected by pyrogenic contamination sources. Background monitoring sites were mostly represented with hydromorphic (Fluvisols Salic and Tidalic Fluvisols) and automorphic (Rendzic Leptosols, Mollic Leptosols) soil types in the study area. The PAHs content in the soils of the background plots did not exceed 600 µg kg−1, with a share of low-molecular-weight PAHs: about 50%. Benzo(a)pyrene content did not exceed the maximum permissible concentration (20 µg kg−1), and low-molecular-weight compounds did not exceed the threshold level for the impact of polyarenes. In automorphic soils, naphthalene and phenanthrene (35–54%) dominated in the composition of the low-molecular-weight PAHs compounds, and only phenanthrene (59–70%) dominated in hydromorphic soils.
The long-term field experiment on the Kastanozem showed that the standard moldboard plowing to a depth of 22 cm (control), chiseling to a depth of 35 cm, and three-tier plowing (machine type PTN–40) to a depth of 45 cm was incapable of providing a stable soil structure and aggregate system. The transcendental Biogeosystem Technique (BGT*) methodology for intra-soil milling of the 20–45 cm layer and the intra-soil milling PMS–70 machine were developed. The PMS–70 soil processing provided the content of 1–3 mm sized aggregate particle fraction in the illuvial horizon of about 50 to 60%, which was 3-fold higher compared to standard plowing systems. Soil bulk density reduced in the layer 20–40 cm to 1.35 t m−3 compared to 1.51 t m−3 in the control option. In the control, the rhizosphere developed only in the soil upper layer. There were 1.3 roots per cm2 in 0–20 cm, and 0.2 roots per cm2 in 20–40 cm. The rhizosphere spreads only through the soil crevices after chilling. After three-tier plowing (PTN–40), the rhizosphere developed better in the local comfort zones of the soil profile between soil blocks impermeable for roots. After intra-soil milling PMS–70, the rhizosphere developed uniformly in the whole soil profile: 2.2 roots per cm2 in 0–20 cm; 1.7 roots per cm2 in 20–40 cm. Matric water potential was higher, soil salinization was lower, and the pH was close to neutral. Soil organic matter (SOM) content increased to 3.3% in 0–20 cm and 2.1% in 20–40 cm compared to the control (2.0% in the 0–20 cm soil layer and 1.3% in the 20–40 cm layer). The spring barley yield was 53% higher compared to the control. The technology life cycle profitability was moldboard 21.5%, chiseling 6.9%, three-tier 15.6%, and intra-soil milling 45.6%. The new design of the intra-soil milling machine provides five times less traction resistance and 80% increased reliability, halving energy costs.
1 January 2023 in Eurasian Journal of Soil Science (EJSS)
The PAHs transformation in the soils of the coal mining enterprises impact zones and thermal power plants remains poorly studied. In turn, coal mining can be considered as a primary cycle in the production of electricity. One of the main sources of negative environmental impact is the coal mining industry located on the territory of the upland in the south of the East European Plain. The features of PAHs accumulation in the soils of fuel and energy enterprises have been studied on the example of mines impact zones with different service life and the current coal-fired power plant. It was established that, regardless of the period and intensity of the emission source, as well as its current status, the polycyclic aromatic hydrocarbons (PAHs) content in the soils of the impact zones was significantly higher than in the soils of the background territory. The content of low molecular and high molecular weight PAHs in the impact zones soils differed depending on the land use type, as well as the period and intensity of an industrial effect type. The pollutants content of in the soils of all considered impact zones significantly exceeded the background values and according to the low molecular weight PAHs content in the soils, they formed the following decreasing series: Mayskiy ≥ Ayutinsky > Novoshahtinsk > Power station > Background. According the high molecular weight PAHs content, the series changed to: Novoshahtinsk >Mayskiy ≥ Ayutinsky > Power station > Background. Soil pollution markers for enterprises of the fuel and energy complex were identified as pyrene and chrysene, which are part of coal, formed from the hydrocarbon sources. The influence of the power plant was accompanied by the benzo(g,h,i)perylene concentration increase.