Digital holographic microscopy is an emerging, potentially low-cost alternative to conventional light microscopy for micro-object imaging on earth, underwater and in space. Immediate access to micron-scale objects however requires a well-balanced system design and sophisticated reconstruction algorithms, that are commercially available, however not accessible cost-efficiently. Here, we present an open-source implementation of a lens-less digital inline holographic microscope platform, based on off-the-shelf optical, electronic and mechanical components, costing less than $190. It employs a Blu-Ray semiconductor-laser-pickup or a light-emitting-diode, a pinhole, a 3D-printed housing consisting of 3 parts and a single-board portable computer and camera with an open-source implementation of the Fresnel-Kirchhoff routine. We demonstrate 1.55 μm spatial resolution by laser-pickup and 3.91 μm by the light-emitting-diode source. The housing and mechanical components are 3D printed. Both printer and reconstruction software source codes are open. The light-weight microscope allows to image label-free micro-spheres of 6.5 μm diameter, human red-blood-cells of about 8 μm diameter as well as fast-growing plant Nicotiana-tabacum-BY-2 suspension cells with 50 μm sizes. The imaging capability is validated by imaging-contrast quantification involving a standardized test target. The presented 3D-printable portable open-source platform represents a fully-open design, low-cost modular and versatile imaging-solution for use in high- and low-resource areas of the world.
In this contribution we experimentally demonstrate the change and improvement of dynamical properties of a passively mode-locked semiconductor laser subject to optical feedback from two external cavities by coupling the feedback pulses back into the gain segment. Hereby, we tune the full delay-phase of the pulse-to-pulse period of both external cavities separately and demonstrate the change of the repetition rate, timing jitter, multi-pulse formation and side-band suppression for the first time for such a dual feedback configuration. In addition, we thereby confirm modeling predictions by achieving both a good qualitative and quantitative agreement of experimental and simulated results. Our findings suggest a path towards the realization of side-band free all-optical photonic oscillators based on mode-locked lasers.
Mode-locked InAs/InGaAs quantum dot lasers emitting optical frequency combs centered at 1310 nm are promising sources for high-speed and high-capacity communication applications. We report on the stable optical pulse train generation by a monolithic passively mode-locked edge-emitting two-section quantum dot laser based on a five-stack InAs/InGaAs dots-in-a-well structure directly grown on an on-axis (001) silicon substrate by solid-source molecular beam epitaxy. Optical pulses as short as 1.7 ps at a pulse repetition rate or inter-mode beat frequency of 9.4 GHz are obtained. A minimum pulse-to-pulse timing jitter of 9 fs, corresponding to a repetition rate line width of 400 Hz, is demonstrated. The generated optical frequency combs yield exceptional low amplitude jitter performance and comb widths exceed 5.5 nm at a −3 dB criteria, containing more than 100 comb carriers.
We propose and demonstrate a technique to control the balance between the two amplitudes of a dual-wavelength laser based on a phase-controlled optical feedback. The feedback cavity length is adjusted to achieve a relative phase shift between the desired emission wavelengths, introducing a boost in gain for one wavelength while the other wavelength experiences additional losses. Tuning the optical feedback phase proves to be an effective way to control the gain and losses, and, thus, to select one or balance the amplitude of the two emission wavelengths. This concept can be easily adapted to any platform, wavelength range and wavelength separations providing that a sufficient carrier coupling and gain can be obtained for each mode. To demonstrate the feasibility and to evaluate the performance of this approach, we have implemented two dual-wavelength lasers with different spectral separations together with individual optical feedback loops onto a InP generic foundry platform emitting around 1550 nm. An electro-optical-phase-modulator is used to tune the feedback phase. With this single control parameter, we successfully achieved extinction ratios of up to 38.6 dB for a 10 nm wavelength separation and up to 49 dB for a 1 nm wavelength separation.
We experimentally study the generation and amplification of stable picosecond-short optical pulses by a master oscillator power-amplifier configuration consisting of a monolithic quantum-dot-based gain-guided tapered laser and amplifier emitting at 1.26 µm without pulse compression, external cavity, gain- or -switched operation. We report a peak power of 42 W and a figure-of-merit for second-order nonlinear imaging of at a repetition rate of 16 GHz and an associated pulse width of 1.37 ps.
We exploit the coupled emission-states of a single-chip semiconductor InAs/GaAs quantum-dot laser emitting simultaneously on ground-state (λGS = 1245 nm) and excited-state (λES = 1175 nm) to demonstrate coupled-two-state self-mixing velocimetry for a moving diffuse reflector. A 13 Hz-narrow Doppler beat frequency signal at 317 Hz is obtained for a reflector velocity of 3 mm/s, which exemplifies a 66-fold improvement in width as compared to single-wavelength self-mixing velocimetry. Simulation results reveal the physical origin of this signal, the coupling of excited-state and ground-state photons via the carriers, which is unique for quantum-dot lasers and reproduce the experimental results with excellent agreement.