Elastomer polydimethylsiloxane (PDMS) films with embedded in-plane gradient stress are created by making PDMS/(PDMS + silicone oil) crosslinked bilayers and extracting the oil in a suitable organic solvent bath. The collapse of the elastomer after oil extraction generates differential stress in the films that is manifested through their out-of-plane deformation. The curvature κ of narrow stripes of the bilayer, which is composed of layers of approximately equal thicknesses and elasticity moduli, is satisfactorily described by the simple relationship κ = 1.5δH−1, where δ is the mechanical strain, and H is the total thickness of the bilayer. Curvature mapping of triangular PDMS plates reveals the existence of spherical and cylindrical types of deformation at different locations of the plates. Various 3D-shaped objects can be formed by the self-folding of appropriately designed 2D patterns that are cut from the films, or by nonuniform distribution of the collapsing layer. Thin PDMS bilayers with embedded stress roll up into microtubes of almost perfect cylindrical shape when released in a controlled manner from a substrate.
18 October 2011 in Macromolecular Rapid Communications
In the biomedical field, self-rolling materials provide interesting opportunities to develop medical devices suitable for drug or cell encapsulation. However, to date, a major limitation for medical applications is the use of non-biodegradable and non-biocompatible polymers that are often reported for such applications or the slow actuation witnessed with degradable systems. In this work, biodegradable self-rolling tubes that exhibit a spontaneous and rapid actuation when immersed in water are designed. Photo-crosslinkable hydrophilic and hydrophobic poly-(ethylene glycol)-poly(lactide) (PEG-PLA) star-shaped copoly-mers are prepared and used to prepare bilayered constructs. Thanks to the discrete mechanical and swelling properties of each layer and the cohesive/gradual nature of the interface, the resulting bilayered films are able to self-roll in water in less than 30 s depending on the nature of the hydrophilic layer and on the shape of the sample. The cytocompatibility and degradability of the materials are demonstrated and confirm the potential of such self-rolling resorbable biomaterials in the field of temporary medical devices.
Biphasic drug delivery systems are used for quick release of a specific amount of drug for immediate amelioration of a patient’s state, followed by sustained release, to avoid repeated administration. This type of delivery is often necessary for pain management and the treatment of many pathologies, such as migraines, hypertension, and insomnia. In this work, we propose a novel architecture of a biphasic release media that does not need the rapidly disintegrating layer and that allows for easily setting the sustained release rate. A drug-containing capsule is made by rolling up a thermally crosslinked gelatin strip on which drug reservoirs are formed by casting. The quick-release reservoir (QRR) is placed at the strip’s extremity, from which the rolling starts, while the sustained-release reservoir (SRR) is formed in the middle part of the strip. The strip is rolled around a cylinder that is a few millimeters wide, which is removed after rolling. The roll is stabilized by transglutaminase-catalyzed crosslinking of the consecutive shells. A biphasic release is successfully demonstrated with the use of model fluorescent drugs for single-dye and double-dye systems in phosphate-buffered saline (PBS) solution with pH = 7.4. In vitro, the drug from the QRR, placed at the walls of the cavity of the roll, is released immediately upon the capsule’s contact with the PBS solution. The drug from the SRR, embedded between the roll’s layers, diffuses steadily, with the lag time defined by the radial position of the reservoir.