Since the publication of the review Progress in the ITER Physics Basis (PIPB) in 2007, significant progress has been made in understanding the processes at the plasma-material interface. This review, part of the ITPA Nuclear Fusion Special Issue On the Path to Burning Plasma Operation, presents these developments, focusing on key areas such as the physics of plasma exhaust, plasma-material interactions, and the properties of plasma-facing materials and their evolution under plasma exposure. The coordinated efforts of the ITPA Topical Group on Scrape-Off Layer and Divertor Physics (DivSOL) have been instrumental in identifying and addressing critical research and development issues in numerous collaborative experimental and modelling projects.

The concentration of helium in tungsten fuzz-like nanostructures has been measured by means of thermal desorption spectroscopy. Fuzz was formed on the W surface under intensive plasma irradiation at 1500 K. The helium content was measured first in the as-irradiated sample, and then in a similar sample with the fuzz mechanically scraped from the sample surface. The difference gave the He content in the fuzz, which was estimated to be He/ W = (13 ± 4)%.

Following ELMy H-mode experiments with liquid metal divertor target on the COMPASS tokamak, we predict the behavior of a similar target on COMPASS Upgrade, where it will be exposed to surface heat fluxes even higher than those expected in the future EU DEMO attached divertor. We simulate the heat conduction, sputtering, evaporation, excitation and radiation of lithium and tin in the divertor area. Measured high-resolution data from COMPASS tokamak were rescaled towards the Upgrade based on many established scalings. Our simulation then yields the amount of released metal which ranges from 4 mg s ⁻¹ upto 12 g s ⁻¹ depending mainly on the geometry and Li/Sn choice, quite independently from active cooling or strike point sweeping.

Self-passivating Metal Alloys with Reduced Thermo-oxidation (SMART) are under development for the primary application as plasma-facing materials for the first wall in a fusion DEMOnstration power plant (DEMO). SMART materials must combine suppressed oxidation in case of an accident and an acceptable plasma performance during the regular operation of the future power plant. Modern SMART materials contain chromium as a passivating element, yttrium as an active element and a tungsten base matrix. An overview of the research and development program on SMART materials is presented and all major areas of the structured R&D are explained. Attaining desired performance under accident and regular plasma conditions are vital elements of an R&D program addressing the viability of the entire concept. An impressive more than 10⁴-fold suppression of oxidation, accompanied with more than 40-fold suppression of sublimation of tungsten oxide, was attained during an experimentally reproduced accident event with a duration of 10 days. The sputtering resistance under DEMO-relevant plasma conditions of SMART materials and pure tungsten was identical for conditions corresponding to nearly 20 days of continuous DEMO operation. Fundamental understanding of physics processes undergone in the SMART material is gained via fundamental studies comprising dedicated modeling and experiments. The important role of yttrium, stabilizing the SMART alloy microstructure and improving self-passivating behavior, is under investigation. Activities toward industrial up-scale have begun, comprising the first mechanical alloying with an industrial partner and the sintering of a bulk SMART alloy sample with dimensions of 100 mm × 100 mm × 7 mm using an industrial facility. These achievements open the way to further expansion of the SMART technology toward its application in fusion and potentially in other renewable energy sources such as concentrated solar power stations.