E3S Web of Conferences, open access proceedings in environment, energy and earth sciences

Three semi-technical scale biofilters were applied to treat waste gases at different industrial sites in Poland: a mechanical–biological treatment plant of municipal solid waste, a wastewater treatment plant and a food industry plant. Two types of materials were used as beds in the biofilters: stumpwood chips and pine bark, and stumpwood chips, pine bark and compost from green waste. Both bed materials supported the microbial growth and high numbers (10⁶–10⁸ cfu/g dry mass (DM)) of culturable bacteria, and fungi in beds were observed. There was no correlation between the number of microorganisms (cfu/g DM) and the respiratory activity in the biofilter beds. However, microbial respiration activity corresponded with microbial abundance expressed as microbial equivalents (ME), which was calculated based on adenosine triphosphate (ATP) determination. The biofilters either reduced or increased bioaerosol emissions from industrial plants, depending on the microbial content in the waste gases. A high microbial content in the waste gases made the effect of microbial emission from the biofilter bed negligible. The type of biofilter bed and number of microorganisms in the bed also influenced the final bioaerosol emission, but these factors were relevant for biofilters that treated waste gases with low microbial concentrations.

The structure of Accumulibacter lineage was examined over a 3-year period in 6 full-scale wastewater treatment plants and compared to the population in a lab-scale reactor. The Accumulibacter lineage reached 69% of all bacteria in the lab-scale reactor and contained clades IA and IIA,C,D only. In full-scale plants, Accumulibacter constituted up to 12%, correlated with sludge loading with BOD, COD, N and P. Clades IA was more abundant after periods with low temperatures, whereas clades IIA,C,D presented opposite variations. The fraction, unrevealed by clade-specific probes, constituted 31–62% of the Accumulibacter lineage in all but one full-scale plant – the population in the plant with significant industrial contribution in influent resembled the low diversity in the lab-scale reactor. Selection of specific clades in the lab-scale reactor was associated with its different performance, despite stable operational conditions being maintained through the study. It implies that high relative abundance of Accumulibacter in bacterial community is not enough for efficient P removal and the effectiveness may also be associated with presence of specific clades. A considerable fraction of Accumulibacter in full-scale plants, which is not targeted by clade-specific probes, should be further investigated to better characterize clades that may affect effectiveness of phosphorus removal.

The increased production and commercial use of nanoparticles (NPs), combined with a lack of regulation regarding their disposal, may result in the unwanted introduction of NPs to wastewater. Wastewater nutrient removal depends on the metabolisms of activated sludge bacteria and their related key enzymes. Therefore, the aim of this work was to determine the effect of aluminium oxide nanoparticles concentrations on the activated sludge enzymatic activity of microorganisms. Tested nanoparticles inhibition cellular respiration in TTC method in the four highest tested concentrations. Moreover, in most samples observed increase dehydrogenase activity. In this study, nano-Al2O3 also caused a clear stimulation of the activity of hydrolytic enzymes microorganisms of activate sludge. Effects of aluminum oxide (compound in bulk forms) on enzymatic activity were different than in the case of the nano from of Al2O3.