Irena Nikolić

Prof. Dr. Irena Nikolić


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2020 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
INIrena Nikolić
Irena Nikolić
DĐDijana Đurović
Dijana Đurović
SMSmilja Marković
Smilja Marković
LVLiljana Veselinović
Liljana Veselinović
IJIvona Janković-Častvan
Ivona Janković-Častvan
VRVelimir R. Radmilović
Velimir R. Radmilović

8 November 2019 in Chemical Engineering Communications
Verified
Journal Article
Closed access
INIrena Nikolić
Irena Nikolić
DĐDijana Đurović
Dijana Đurović
MTMilena Tadić
Milena Tadić
VRVuk V. Radmilović
Vuk V. Radmilović
VRVelimir R. Radmilović
Velimir R. Radmilović
Two adsorbents, pristine electric arc furnace slag (EAFS) and alkali activated slag (AAS) were used for Cu2+ removal from aquatic solutions. Batch adsorption tests were conducted at various temperatures and initial Cu2+ concentrations, while solid to liquid ratio and pH of solution were kept constant. Pseudo-first-order and pseudo-second-order (PSO) kinetics models, Langmuir and Freundlich isotherm models, as well as intraparticle and Boyd’s diffusion models were applied in order to investigate the adsorption process. It has been found that alkali activation of EAFS leads to an increase in the specific surface of slag and thus improves the sorption properties of EAFS. The adsorption of Cu2+ onto both adsorbents proceeds via PSO adsorption mechanism, film diffusion mainly controls the adsorption process, and Langmuir isotherm model fits well the experimental data. Results indicated a fast adsorption process which is spontaneous and endothermic in nature. Microstructural investigation of EAFS and AAS revealed morphological changes in metal loaded EAFS and AAS samples in comparison to unloaded adsorbents. X-ray powder diffraction analysis indicated that adsorption of Cu2+ onto both adsorbents occurs through formation of a Cu-complex.

15 September 2017 in Journal of Analytical Atomic Spectrometry
Verified
Journal Article
Open access
PDF file
ADAna Drinčić
Ana Drinčić
JŠJanez Ščančar
Janez Ščančar
TZTea Zuliani
Tea Zuliani
INIrena Nikolić
Irena Nikolić
Radmila Milačič ŠčančarRadmila Milačič Ščančar
Radmila Milačič Ščančar
Flay ash, cement and electric arc furnace (EAF) dust are frequently mixed in building composites. From them, chromium (Cr), arsenic (As), molybdenum (Mo) and vanadium (V) may be leached. Concentrations of V in leachates may be significantly higher than those of Cr, As and Mo, making simultaneous speciation analysis particularly difficult. In this work, a high performance liquid chromatography inductively coupled plasma mass spectrometry (HPLC-ICP-MS) procedure was used for simultaneous speciation of chromate, arsenate, molybdate and vanadate. First, the behaviour of Cr, As, Mo and V species in different oxidation states was studied during their separation under acidic (pH 5) and alkaline (pH 12) conditions. At alkaline pHs chromate, arsenate, molybdate and vanadate were simultaneously separated and eluted at retention times from 390 to 450 s, 230 to 270 s, 340 to 430 s and 270 to 380 s, respectively and detected on-line by ICP-MS, recording m/z 52, 75, 95 and 51, respectively. When V species were leached in significantly higher concentrations than Cr, Mo and As, their detection was possible at the low abundance (0.25%) 50V isotope, which is also the mass of the 50Cr isotope (abundance 4.345%), due to selective separation between V and Cr species. Good repeatability of measurement (RSD better than ±3.0%) and quantitative elution of elemental species (column recoveries 99–105%) were obtained. Finally, the procedure was applied in the simultaneous speciation analysis of chromate, arsenate, molybdate and vanadate in highly alkaline aqueous leachates from composites consisting of fly ash, cement and EAF dust that contained a wide range of concentrations of vanadate.

20 September 2022 in International Journal of Environmental Research
Verified
Journal Article
Closed access
PDF file
MBMiljan Bigović
Miljan Bigović
DĐDijana Đurović
Dijana Đurović
INIrena Nikolić
Irena Nikolić
LILjubica Ivanović
Ljubica Ivanović
BBBorko Bajić
Borko Bajić

1 January 2024 in Science of Sintering
Verified
Journal Article
Open access
PDF file
NTNebojsa Tadic
Nebojsa Tadic
SBSnezana Brasanac-Vukanovic
Snezana Brasanac-Vukanovic
INIrena Nikolić
Irena Nikolić
VRVuk V. Radmilović
Vuk V. Radmilović
VRVelimir R. Radmilović
Velimir R. Radmilović
The study presented in this paper explores the simultaneous valorization of electric arc furnace slag (EAFS) and electric arc furnace dust (EAFD) through an alkali activation process, as well as the thermal stability of the resulting product. Moreover, environmental fingerprints of alkali activated slag doped with EAFD, before and after thermal treatment, were evaluated. The results demonstrated the feasible alkali activation of EAFS in the presence of EAFD yielding a product that met the criteria which enables its application in a civil engineering at ambient and at elevated temperatures (1000?C). Moreover, the EN12457-2 leaching test results, demonstrated that unheated alkali-activated slag with addition of 5% EAFD met the criteria for disposal at non-hazardous landfills as per European Directive 2003/33/CE. However, environmental fingerprints of alkali activated slag with 5% EAFD after heating to 1000?C, is of concern since chromium release exceeded the permissible concentration requiring disposal in hazardous waste landfills.

1 January 2022 in Serbian Journal of Engineering Management
Verified
Journal Article
Open access
PDF file
INIrena Nikolić
Irena Nikolić
Electric arc furnace slag (EAFS) and electric arc furnace dust (EAFD) are the waste materials from the steel production by EAF route which implies remelting of iron and steel scrap in electric arc furnaces (EAF). In recent years, special attention is paid on the valorisation of EAFS and EAFD since disposing the both may cause negative impacts on the environment. In this paper, the methods that are in use to process EAFS and EAFD have been reviewed, and their advantages and disadvantages are also addressed. Literature data indicates that EAFS can be successfully valorised in civil engineering, wastewaters treatments and as a soil nutrient in agriculture, while the presence of valuable elements in EAFD is motivational factors for the recycling of EAFD. Moreover, valorisation of EAFD through vitrification and stabilization/solidification processes is also widely discussed.