G.P. Peterson

G.P. Peterson


Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 March 2011 in Discover Nano
Verified
Journal Article
Open access
PDF file
MJMatthew Jones
Matthew Jones
CLCalvin H Li
Calvin H Li
AAAbdollah Afjeh
Abdollah Afjeh
GPG.P. Peterson
G.P. Peterson
An experimental investigation of the combustion behavior of nano-aluminum (n-Al) and nano-aluminum oxide (n-Al2O3) particles stably suspended in biofuel (ethanol) as a secondary energy carrier was conducted. The heat of combustion (HoC) was studied using a modified static bomb calorimeter system. Combustion element composition and surface morphology were evaluated using a SEM/EDS system. N-Al and n-Al2O3 particles of 50- and 36-nm diameters, respectively, were utilized in this investigation. Combustion experiments were performed with volume fractions of 1, 3, 5, 7, and 10% for n-Al, and 0.5, 1, 3, and 5% for n-Al2O3. The results indicate that the amount of heat released from ethanol combustion increases almost linearly with n-Al concentration. N-Al volume fractions of 1 and 3% did not show enhancement in the average volumetric HoC, but higher volume fractions of 5, 7, and 10% increased the volumetric HoC by 5.82, 8.65, and 15.31%, respectively. N-Al2O3 and heavily passivated n-Al additives did not participate in combustion reactively, and there was no contribution from Al2O3 to the HoC in the tests. A combustion model that utilized Chemical Equilibrium with Applications was conducted as well and was shown to be in good agreement with the experimental results.

30 September 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
JWJoseph D Williams
Joseph D Williams
GPG.P. Peterson
G.P. Peterson
Phase change materials (PCMs) are of increasing interest due to their ability to absorb and store large amounts of thermal energy, with minimal temperature variations. In the phase-change process, these large amounts of thermal energy can be stored with a minimal change in temperature during both the solid/liquid and liquid/vapor phase transitions. As a result, these PCMs are experiencing increased use in applications such as solar energy heating or storage, building insulation, electronic cooling, food storage, and waste heat recovery. Low temperature, nano-enhanced phase change materials (NEPCM) are of particular interest, due to the recent increase in applications related to the shipment of cellular based materials and vaccines, both of which require precise temperature control for sustained periods of time. Information such as PCM and nanoparticle type, the effective goals, and manipulation of PCM thermal properties are assembled from the literature, evaluated, and discussed in detail, to provide an overview of NEPCMs and provide guidance for additional study. Current studies of NEPCMs are limited in scope, with the primary focus of a majority of recent investigations directed at increasing the thermal conductivity and reducing the charging and discharging times. Only a limited number of investigations have examined the issues related to increasing the latent heat to improve the thermal capacity or enhancing the stability to prevent sedimentation of the nanoparticles. In addition, this review examines several other important thermophysical parameters, including the thermal conductivity, phase transition temperature, rheological affects, and the chemical stability of NEPCMs. This is accomplished largely through comparing of the thermophysical properties of the base PCMs and their nano-enhanced counter parts and then evaluating the relative effectiveness of the various types of NEPCMs. Although there are exceptions, for a majority of conventional heat transfer fluids the thermal conductivity of the base PCM generally increases, and the latent heat decreases as the mass fraction of the nanoparticles increases, whereas trends in phase change temperature are often dependent upon the properties of the individual components. A number of recommendations for further study are made, including a better understanding of the stability of NEPCMs such that sedimentation is limited and thus capable of withstanding long-term thermal cycles without significant degradation of thermal properties, along with the identification of those factors that have the greatest overall impact and which PCM combinations might result in the most significant increases in latent heat.

23 September 2020 in International Journal of Heat and Mass Transfer
Verified
Journal Article
Closed access
MTMehrdad Torabi
Mehrdad Torabi
NKNader Karimi
Nader Karimi
MTMohsen Torabi
Mohsen Torabi
GPG.P. Peterson
G.P. Peterson
CSCarey J. Simonson
Carey J. Simonson

15 May 2010 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
MHMark Horton
Mark Horton
HHHaiping Hong
Haiping Hong
CLChen Li
Chen Li
BSBo Shi
Bo Shi
GPG.P. Peterson
G.P. Peterson
SJSungho Jin
Sungho Jin
Thermal conductivity (TC) of heat transfer nanofluids containing magnetic-metal-coated carbon nanotubes can be significantly enhanced (>60%) by applied magnetic field. In this paper, we report the observed real images of Ni-coated single wall carbon nanotubes in water and oils (polyalphaolefin, polyol ester) under magnetic field by high speed microscopy, and correlate them with TC measurements. Initially, the nanotubes are randomly dispersed in the fluid, however, on longer holding in magnetic field the nanotubes gradually stretch and are finally aligned. The chain length in the images is found to be around 30∼150 μm , which is much longer than the real length of individual nanotubes (5∼40 μm) , indicating that nanotubes are aligned and form some chains and clusters. Because of the semicontinuous nature of Ni magnetic nanoparticles, as well as the viscosity resistance of the fluid itself, it takes some time for the Ni-coated nanotubes to respond to the applied magnetic field and align. Time dependent TC experiments indicate that alignment process dominates the TC enhancement rather than microconvection. Finally, scanning electron microscopy images also show that the Ni coated nanotubes are aligned well under the influence of a magnetic field. Transmission electron microscopy images indicate that nickel remains stable and attached onto the nanotubes after the magnetic field exposure and movements.

1 March 2013 in Journal of Nanofluids
Verified
Journal Article
Closed access
GCGreg Christensen
Greg Christensen
HYHammad Younes
Hammad Younes
HHHaiping Hong
Haiping Hong
GPG.P. Peterson
G.P. Peterson

30 August 2016 in Journal of Heat Transfer
Verified
Journal Article
Closed access
PDF file
MTMehrdad Torabi
Mehrdad Torabi
MTMohsen Torabi
Mohsen Torabi
GPG.P. Peterson
G.P. Peterson