This study focused on methods estimation and compensation frequency offset in communication systems with LoRa modulation. LoRa being used in IoT applications rapidly expands its markets. The article discusses three methods for estimation and compensation frequency offset as well as details of the comparative analysis made. Aside from the well-known methods by Ghanaatian and Golden Section Search (GSS), the third method is offered by the authors of the article and represents an improved version of the method proposed by Ghanaatian. The proposed method is based on a symmetric processing signal that is divided into two parts. The advantages and drawbacks of the considered methods are described. As a result of the performed study, a software model was developed, the dependence of the root mean-square error (RMSE) estimation of the frequency offset, and cumulative density function (CDF) of the frequency estimation error was calculated. Modeling was performed under identical conditions. The frequency offset accuracy provided by the proposed method exceeded the accuracy of the considered methods.
The growing demand for broadband Internet services is forcing scientists around the world to seek and develop new telecommunication technologies. With the transition from the fourth generation to the fifth generation wireless communication systems, one of these technologies is beamforming. The need for this technology was caused by the use of millimeter waves in data transmission. This frequency range is characterized by heavy path loss. The beamforming technology could compensate for this significant drawback. This paper discusses basic beamforming schemes and proposes a model implemented on the basis of QuaDRiGa. The model implements a MIMO channel using symmetrical antenna arrays. In addition, the methods for calculating the antenna weight coefficients based on the channel matrix are compared. The first well-known method is based on the addition of cluster responses to calculate the coefficients. The proposed one uses the singular value decomposition of the channel matrix into clusters to take into account the most correlated information between all clusters when calculating the antenna coefficients. According to the research results, the proposed method for calculating the antenna coefficients allows an increase in the SNR/SINR level by 8–10 dB on the receiving side in the case of analog beamforming with a known channel matrix.
Channel estimation in an Orthogonal Frequency Division Multiplexing system using compressed sensing theory allows for a significant reduction in the number of pilot subcarriers and improves the utilization of spectrum resources. Currently, a large number of greedy algorithms have been developed, many of which have proven to be highly effective for solving this problem. However, these algorithms require prior knowledge of the channel sparsity order. Additionally, greedy algorithms typically use such metrics as error functions, that do not allow to set reliable threshold for algorithm stopping criteria. Information about sparsity may not be available in real communication system, and the number of paths can change with time. Using the standard error function metrics for channel estimation is insufficient, as it can often lead to overfitting of the algorithm and degradation in the quality of the reconstructed channel impulse response. Adaptive Pruning Orthogonal Matching Pursuit was proposed in this work for channel estimation in OFDM systems. The algorithm is adaptive and does not require prior knowledge of the channel sparsity. APOMP is based on the Orthogonal Matching Pursuit algorithm, which itself is not adaptive. Adaptability to channel sparsity is achieved by introducing a new loss function. This loss function utilizes more available information, thereby avoiding overfitting and enabling the determination of the sparsity order of the channel impulse response. The effectiveness of the algorithm was verified through simulation using the QuaDRiGa channel generator.
Every year the number of IoT devices is growing, which gives a boost to development of such technology as Power Line Communication (PLC). The term PLC refers to the use of a power supply circuit to transmit data. Full-duplex technology can be applied to increase the data transfer rate in a PLC. The difficulty in using a full duplex is the need to suppress the transmitter’s own signal (interference signal). Analog cancellation and digital cancellation are used for this purpose. Common algorithms for digital cancellation are adaptive algorithms. In this paper adaptive algorithms such as Particle Swarm Optimization (PSO) and Recursive Least Squares (RLS) are considered and a modification of the classical RLS is proposed. The proposed algorithm uses precalculated weight coefficients together with periodic reinitialization of the filter. This avoids the influence of significant changes in the input signal on the further process of filter adaptation and provides the highest level of echo suppression. The proposed algorithm provides an improvement of parameters such as Error Vector Magnitude (EVM) and Signal-to-Interference Ratio (SIR) in comparison with classical RLS and PSO, according to the results of the study.
Frequency synchronization is a necessary operation for all wireless communication systems. Due to the wide frequency range defined for 5G NR systems, this procedure becomes critical. To ensure high transmission rates and the use of high-order modulation, up to 256 QAM for 5G communication systems, it is necessary to ensure high frequency synchronization accuracy. In this article, we have reviewed various approaches to implementing frequency synchronization and proposed, in our opinion, the most effective method for correcting the frequency shift of the signal.
Power line communication systems, which are widely used for smart home systems, the industrial Internet of things, can be used in aviation and space technology. One of the important problems of power line communication systems is the need to increase spectral efficiency, since operation is possible in the frequency range up to 30 MHz, limited by high attenuation of signals at higher frequencies. The use of technology of full-duplex data transmission via power circuits will allow up to 2 times increase spectral efficiency. This article describes approaches to the implementation of this technology, outlines the main problems to be faced and ways to solve them. We have proposed the most effective approach in our opinion to compensate for the signal of our own transmitter in the receiving channel.