Currently, the performance analysis of positioning algorithms and optimization of ground station deployment schemes are predominantly based on pure TOA or TDOA measurement information, and the relevant theoretical analysis is primarily the geometric analysis of optimal station deployment for fixed point targets, with few placement ranges and amount of station constraints. In practice, however, there are typically several measurements from TOA and TDOA stations, with a focus on positioning precision within a certain region or line trajectory, as well as the necessity for constraints on the ground station placement range. This paper proposes an efficient method for hybrid source localization using TOA and TDOA measurement information, establishes a mathematical model for hybrid source localization based on TOA and TDOA measurement information, derives and simulates the Gauss–Newton iterative localization algorithm with the least squares criterion, and performs a theoretical analysis of the least squares error and CRLB boundary to improve the accuracy of target localization in the aforementioned scenarios. Taking the average CRLB value of target line trajectory positioning error as the objective function, the ground station placement scheme of TOA- and TDOA-receiving sensors is optimized by utilizing a Genetic Algorithm with strong global optimization capability under the constraints of station placement range and station quantities, and a station placement geometry with better performance than typical station placement is obtained. Meanwhile, we summarize the general placement principles for TOA and TDOA hybrid source localization of target line trajectories.
27 October 2020 in EURASIP Journal on Wireless Communications and Networking
How to achieve energy-efficient transmission in radio frequency energy harvesting cognitive radio network (RF-CRN) is of great importance when nodes in CRN are self-maintained. This paper presents a radio frequency (RF) energy harvesting hardware-based underlay cognitive radio network (RH-CRN) structure, where a secondary transmitter (ST) first harvests energy from RF signals source originating from the primary network, and then communicates with a secondary receiver (SR) in underlay mode by using the harvested energy. The total consumed energy by the secondary user (SU) must be equal to or less than the total harvested energy referred to as energy causality constraint, In addition, the ST possesses some initial energy which may be the residual energy from the former transmission blocks, and we consider the energy loss of energy harvesting circuit as a systematic factor as well. Our goal is to achieve the maximum energy efficiency (EE) of the secondary network by jointly optimizing transmitting time and power. To guarantee the quality of service (QoS) of secondary transceiver, a minimum requirement of throughput constraint is imposed on the ST in the process of EE maximization. As the EE maximization is a nonlinear fractional programming problem, a quick iterative algorithm based on Dinkelbach’s method is proposed to achieve the optimal resource allocation. Simulation results show that the proposed strategy has fast convergence and can improve the system EE greatly while ensuring the QoS.
This paper proposes a novel joint precoding and artificial noise design framework for generalized spatial directional modulation (AN-GSDM) in unmanned aerial vehicle (UAV) communications, aimed at enhancing the physical-layer security of downlink UAV communication systems. The key innovation lies in the dynamic co-optimization of multi-beam control and artificial noise (AN) power allocation under mobility constraints, enabling real-time adaptation to varying channel conditions. This approach jointly optimizes the precoding matrix and power-control factor, facilitating the effective management of multi-beams and AN to maximize the secrecy rate. The secrecy rate expression is derived, and the corresponding joint optimization problem is formulated. Due to the non-convex nature of the problem and the lack of a closed-form solution, an alternating iterative algorithm is proposed. This algorithm alternates between optimizing the precoding matrix using gradient descent and deriving a suboptimal closed-form solution for the power-control factor. Simulation results confirm that the proposed algorithm significantly enhances security by maximizing the secrecy rate, reducing eavesdroppers’ achievable rate to near zero, while simultaneously maintaining legitimate user’s rate. The approach not only strengthens security but also preserves system effectiveness, demonstrating robust convergence properties. This makes it a practical and promising solution for secure UAV communication.
The broadcast nature of wireless channels introduces significant security vulnerabilities in information transmission, particularly when the eavesdropper is close to the legitimate destination. In such scenarios, the eavesdropping channel often exhibits high spatial correlation with, or even superior quality to, the legitimate channel. This makes it challenging for traditional power optimization methods to effectively suppress the eavesdropping rate. To address this challenge, this paper proposes an optimization method for the secrecy capacity of unmanned aerial vehicle (UAV) relaying based on the dynamic adjustment of the power allocation factor. By injecting artificial noise (AN) during signal forwarding and combining it with real-time channel state information, the power allocation factor can be dynamically adjusted to achieve precise jamming of the eavesdropping link. We consider a four-node communication model consisting of a source, a UAV, a legitimate destination, and a passive eavesdropper, and formulate a joint optimization problem to maximize the secrecy rate. Due to the non-convexity of the original problem, we introduce relaxation variables and apply successive convex approximation (SCA) to reformulate it into an equivalent convex optimization problem. An analytical solution for the power allocation factor is derived using the water-filling (WF) algorithm. Furthermore, an alternating iterative optimization algorithm with AN assistance is proposed to achieve global optimization of the system parameters. Simulation results demonstrate that, compared to traditional power optimization schemes, the proposed algorithm substantially suppresses the eavesdropping channel capacity while enhancing transmission efficiency, thereby significantly improving both secrecy performance and overall communication reliability.
An innovative method for synthesizing optimum difference patterns of the spherical sensor array is introduced, along with a sidelobe tapering technique. Firstly, we suggest employing the spherical harmonics of degree ±1 to synthesize the spherical array difference pattern; secondly, we study the mapping relationship between the difference pattern of the spherical sensor array and the difference pattern of the uniformly spaced linear array (ULA) with odd-numbered elements; finally, we enhance the Zolotarev difference pattern, which is a counterpart to the Dolph–Chebyshev sum pattern that traditionally allows synthesis only for ULA with even-numbered elements. Our modification extends its applicability to synthesize difference patterns for ULA with odd-numbered elements. Leveraging the optimal difference pattern, a generalized Bayliss difference pattern synthesis method designed for the ULA with odd-numbered elements is further proposed. To illustrate the effectiveness of our approach, we present several design examples through experimental simulation.