Phillimon T Odirile

Dr. Phillimon T Odirile

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 November 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
YOYashon Ouma
Yashon Ouma
DMDitiro Benson Moalafhi
Ditiro Benson Moalafhi
GAGeorge Anderson
George Anderson
BNBoipuso Nkwae
Boipuso Nkwae
POPhillimon T Odirile
Phillimon T Odirile
Jiaguo QiJiaguo Qi
Jiaguo Qi
To predict the variability of dam water levels, parametric Multivariate Linear Regression (MLR), stochastic Vector AutoRegressive (VAR), Random Forest Regression (RFR) and Multilayer Perceptron (MLP) Artificial Neural Network (ANN) models were compared based on the influences of climate factors (rainfall and temperature), climate indices (DSLP, Aridity Index (AI), SOI and Niño 3.4) and land-use land-cover (LULC) as the predictor variables. For the case study of the Gaborone dam and the Bokaa dam in the semi-arid Botswana, from 2001 to 2019, the prediction results showed that the linear MLR is not robust for predicting the complex non-linear variabilities of the dam water levels with the predictor variables. The stochastic VAR detected the relationship between LULC and the dam water levels with R2 > 0.95; however, it was unable to sufficiently capture the influence of climate factors on the dam water levels. RFR and MLP-ANN showed significant correlations between the dam water levels and the climate factors and climate indices, with a higher R2 value between 0.890 and 0.926, for the Gaborone dam, compared to 0.704–0.865 for the Bokaa dam. Using LULC for dam water predictions, RFR performed better than MLP-ANN, with higher accuracy results for the Bokaa dam. Based on the climate factors and climate indices, MLP-ANN provided the best prediction results for the dam water levels for both dams. To improve the prediction results, a VAR-ANN hybrid model was found to be more suitable for integrating LULC and the climate conditions and in predicting the variability of the linear and non-linear time-series components of the dam water levels for both dams.

19 February 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
YOYashon Ouma
Yashon Ouma
BNBoipuso Nkwae
Boipuso Nkwae
POPhillimon T Odirile
Phillimon T Odirile
DMDitiro Benson Moalafhi
Ditiro Benson Moalafhi
GAGeorge Anderson
George Anderson
Jiaguo QiJiaguo Qi
Jiaguo Qi
For sustainable water resource management within dam catchments, accurate knowledge of land-use and land-cover change (LULCC) and the relationships with dam water variability is necessary. To improve LULCC prediction, this study proposes the use of a random forest regression (RFR) model, in comparison with logistic regression–cellular automata (LR-CA) and artificial neural network–cellular automata (ANN-CA), for the prediction of LULCC (2019–2030) in the Gaborone dam catchment (Botswana). RFR is proposed as it is able to capture the existing and potential interactions between the LULC intensity and their nonlinear interactions with the change-driving factors. For LULCC forecasting, the driving factors comprised physiographic variables (elevation, slope and aspect) and proximity-neighborhood factors (distances to water bodies, roads and urban areas). In simulating the historical LULC (1986–2019) at 5-year time steps, RFR outperformed ANN-CA and LR-CA models with respective percentage accuracies of 84.9%, 62.1% and 60.7%. Using the RFR model, the predicted LULCCs were determined as vegetation (−8.9%), bare soil (+8.9%), built-up (+2.49%) and cropland (−2.8%), with water bodies exhibiting insignificant change. The correlation between land use (built-up areas) and water depicted an increasing population against decreasing dam water capacity. The study approach has the potential for deriving the catchment land–water nexus, which can aid in the formulation of sustainable catchment monitoring and development strategies.

10 December 2021 in Water
Verified
Journal Article
Open access
PDF file
POPhillimon T Odirile
Phillimon T Odirile
PMPotlako Marvin Marumoloa
Potlako Marvin Marumoloa
AMAnthoula Manali
Anthoula Manali
Gikas PetrosGikas Petros
Gikas Petros
Two different types of primary sewage sludge have been used as feedstock for production of biogas through anaerobic digestion (AD): the one type was sludge from a typical primary clarifier (PC), while the other type of sludge produced by a rotating belt filter, commonly called microsieve (MS). Initially the main physicochemical characteristics of the sludges, such as total solids (TS), volatile solids (VS), VS/TS, pH and carbon to nitrogen ratio (C/N) were determined, for MS: 37.86 ± 0.08%, 83.00 ± 0.41%, 0.83 ± 0.00, 6.67 ± 0.08 and 19.68 ± 0.69, respectively, and for PC: 2.61 ± 0.08%, 78.77 ± 1.91%, 0.79 ± 0.02, 6.61 ± 0.10 and 14.46 ± 1.23, respectively. Then, calculated amounts of the sludges were inserted into airtight vials and were inoculated using anaerobic sludge. The daily biogas production was measured over a period of 30 days. PC sludge maximized the daily biogas production (44.20 mlbiogas/gvsd) 11 days after inoculation, while the MS sludge reach a peak (37.74 mlbiogas/gvsd) 14 days after inoculation. The cumulative biogas production over the 30 days of AD was in the same laver (442.29 mlbiogas/gvs for PC versus 434.73 mlbiogas/gvs for MS). However, PC sludge indicated higher daily biogas production, compared to MS sludge, while the opposite was observed for the period following the peak point. The Volatile Solids Reduction for PC and MS sludges was recorded as 46.06% and 32.39%, respectively.

29 November 2024 in Environmental Monitoring and Assessment
Verified
Journal Article
Open access
PDF file
POPhillimon T Odirile
Phillimon T Odirile
VOVeronica C. Obuseng
Veronica C. Obuseng
MMMohau Moshoeshoe
Mohau Moshoeshoe
LTLamong Tshenyego
Lamong Tshenyego
BMBontle Mbongwe
Bontle Mbongwe
Pit latrines represent the predominant form of on-site sanitation in Botswana, posing unique challenges in faecal sludge (FS) management. The key concerns revolve around FS extraction, treatment, and safe disposal. Currently, co-treatment with wastewater is the primary approach, but it strains wastewater treatment plants (WWTPs) and compromises effluent quality. This study comprehensively assesses FS quality from pit latrines and evaluates the potential health risks when used in agriculture for soil improvement/amendment. Systematic sampling of soils at various depth intervals, approximately 30 cm apart, was conducted, followed by extensive laboratory analysis, including determination of heavy metals (copper, iron, lead, cadmium, zinc, manganese, and arsenic) using inductively coupled plasma atomic emission spectroscopy (ICP-OES) and nutrient analysis using ion chromatography (IC). The findings unequivocally demonstrate that FS from VIP (ventilated improved pit) latrines poses no significant health risks due to heavy metal content. Specifically, Geo-accumulation Index (Igeo) values for nickel (Ni), chromium (Cr), and arsenic (As) were consistently negative, indicating negligible risk of environmental contamination. Copper (Cu) concentrations averaged 40.36 mg/kg in samples collected from Mogoditshane and 591.61 mg/kg in those collected from Broadhurst (Gaborone, Botswana) with Igeo values indicating a moderate pollution risk. Nutrient analysis showed high levels of nitrogen (NO3−), with concentrations reaching 4.47 × 103 mg/kg in some samples, and phosphorus (PO43−) levels as high as 3.9 × 104 mg/kg. These findings highlight its agricultural potential for soil amendment, though prudent management is needed to mitigate eutrophication. The study advocates for separate FS treatment, resolving co-treatment operational challenges and enhancing sustainability. Implementing these recommendations promises to address FS management issues, bolster food security, and enhance Botswana’s ecological well-being.

5 May 2026 in Separations
Verified
Journal Article
Open access
PDF file
POPhillimon T Odirile
Phillimon T Odirile
NBNkgopolang Matthews Boima
Nkgopolang Matthews Boima
Water pollution due to insufficient wastewater treatment is a global concern. In this paper, coagulation and flocculation as a tertiary polishing unit process were investigated to find a solution for a non-compliant wastewater treatment facility. The Palapye Pond Enhanced Treatment and Operation (PETRO) system has not been compliant for a long time with effluent characterised by high turbidity, Biological Oxygen Demand/Chemical Oxygen Demand (BOD/COD), Total Suspended Solids (TSS), Nitrates (NO3−), and Phosphates (PO43−) The effluent from the plant is released into the stream that drains into the nearby Lotsane dam, posing significant danger to the water quality of the dam. The main objective of the study was to investigate the effect of coagulation and flocculation processes at the tertiary stage of the wastewater treatment process. Response Surface Methodology (RSM), Central Composite Design (CCD) and Multi Response Surface (MRS) were used to optimise the coagulation process and generate regression models to predict the coagulation and flocculation. The performance was evaluated using turbidity, Colour, COD and TSS as response variables. Response surface analysis indicated that the experimental data could be adequately fitted to quadratic polynomial models. Under optimum conditions the removal efficiency for Al2(SO4)3·18H2O: 91.1% (turbidity), 88.2% (colour), 58.9% (COD), 83.0% (TSS); for FeCl3·6H2O: 93.2%, 88.7%, 63.8%, 91.3%; for Moringa: 91.8%, 85.4%, 56.6%, 83.7%. The optimal removals based on MRS for Al2(SO4)3.18H2O, FeCl3.6H2O and Moringa oleifera were 90.7%, 89.7%, 59.9% and 88.5%; 94.7%, 90.8%, 58.1% and 93.8%; 94.0%, 87.2%, 60.1% and 82.1% for turbidity, colour, COD and TSS respectively. This research has demonstrated that the coagulation/flocculation process, operating synergistically with pH-induced precipitation softening, can be incorporated as an enhancement to the secondary treatment stage of the wastewater treatment facility. At the optimal alkaline conditions (pH 12–12.6), the dominant mechanism is the precipitation of native hardness ions (Mg2+, Ca2+) as Mg(OH)2 and CaCO3, which enmesh colloidal particles, while the added coagulants play a refining role by enhancing floc structure and settling. The study introduces a comparative evaluation of three coagulants within a single RSM-CCD optimisation framework, employing desirability functions for multi-response optimisation.

25 September 2024 in Journal of Civil Engineering and Urbanism
Verified
Journal Article
Closed access
LTLamong Duke Tshenyego
Lamong Duke Tshenyego
POPhillimon T Odirile
Phillimon T Odirile
GGGilbert. K. Gaboutloeloe
Gilbert. K. Gaboutloeloe
In developing countries like Botswana, addressing leachate treatment presents considerable difficulties, especially regarding the management of sewage sludge (SS). This research evaluated the capacity of activated biochar, derived from sewage sludge, to adsorb Total Organic Carbon (TOC). Biochar was produced under conditions with limited oxygen, by placing approximately 50 grams of dried sewage sludge in sealed porcelain crucibles and heating them at a rate of 10°C per minute to 400°C for four hours. The resulting biochar (WWSBC400) was then stored in plastic bags in a dry environment. The pyrolysis yield was calculated as the ratio of the weight of the produced biochar to the initial weight of the dry sewage sludge. The study identified the maximum adsorption capacities (qm) for TOC in landfill leachate solutions, highlighting surface precipitation as a key adsorption mechanism for WWSBC400. Additionally, the removal of carbon ions using biochar produced from sludge at Gaborone's wastewater treatment facility was investigated. Continuous adsorption columns were utilized to demonstrate TOC solution adsorption, with performance evaluated in a fixed-bed column through model simulation. The Thomas model was used to compare experimental kinetic data, with the experimental data generally aligning well with the Thomas model, achieving a correlation coefficient (R²) of 0.9114 for the first round of activated biochar removal. The adsorption capacity of the biochar was recorded at 389.265 mg/g after 14.5 hours of column adsorption, with regeneration studies showing varying adsorption capacities of 742.82 mg/g, 875.47 mg/g, 682.13 mg/g, and 735.21 mg/g for successive rounds. Surface precipitation was found to be a vital process for carbon adsorption onto WWSBC400. In conclusion, using sewage sludge biochar for co-contaminated soil shows potential for heavy metal immobilization, presenting a viable option for environmental rehabilitation.